Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Grapevine
When a gate post leans or a rail lets go in Grapevine, the fix usually comes down to two things: the right part and a weld that actually holds. We handle both. Gatewood Fence & Gate has been repairing gates on site since 2001, and our Gate Parts & Welding crew welds the gate in your driveway rather than hauling it off. In Grapevine, that means we’re working within the tight shared driveways off Hall-Johnson Road, the estate entrances up near Grapevine Lake, and the commercial slide gates along TX-26 where operators run more cycles in a week than a home gate sees in a year. Call (877) 610-2993 and a live person answers, day or night.
Here’s the thing about Grapevine that most out-of-town repair outfits don’t account for: the black cotton clay moves. A gate that was square in October can be racked and binding by April. That soil movement is behind most of the hinge post replacements and rail repairs we do across 76051 and 76099. If the post has heaved, replacing the hinge without fixing the post means you’ll fix it twice. We start at the post.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When a Grapevine homeowner calls, they’re not getting a rotating cast of subcontractors. They’re getting Hal or one of his background-checked, uniformed crew members who has welded in this soil before and knows what a racked ornamental iron frame looks like after a wet spring.
We answer the phone around the clock. Not a voicemail, not a call center three states away. A person. That matters when you come out to find your gate jammed half-open at 6:45 in the morning and your car is stuck in the driveway.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call brings us back, no runaround. You also get a free second opinion on any written estimate you bring us, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The price is quoted and agreed before any work starts. Not an estimate that changes at the door, a price.
Our Gate Parts & Welding Services in Grapevine
Hinge Replacement
A gate sags in the hinge post, not in the middle. In Grapevine, expansive clay pushes posts out of plumb and loads the hinges unevenly until the gate drags on the latch side or the hinge itself bends or snaps. We replace worn or seized hinges with heavier gauge hardware, and if the post has moved, we address that too. Swapping a hinge on a post that’s drifted three inches out of square is a temporary fix, and we won’t sell you one.
Post Replacement
Black cotton clay swells with winter rain and shrinks through July heat. A post set in a shallow footing will heave, lean, and eventually take the whole gate frame with it. We set Grapevine gate posts deeper than the bare minimum, with concrete footings that stand up to soil movement. Around the lakeside neighborhoods near Grapevine Lake, ornamental iron estate gates often sit on posts that have been in the ground since the home was built, and a proper post replacement is what keeps the gate square for the next twenty years.
Rail Repair
Most ornamental iron gates in Grapevine’s 1990s and 2000s brick subdivisions have top and bottom rails that take every bit of stress the frame carries. When clay movement racks the frame, the rails crack at the weld points. We grind out the old weld, re-true the frame, and weld on site, so the gate stays in your driveway and the repair is done to the same standard the original fabricator intended, often better.
Custom Welding
Grapevine is full of gates that don’t quite fit somebody’s standard catalog: the slide gate squeezed into a shared driveway off Dove Road, the pedestrian gate that has to keep the dog in while the driveway gate is open, the courtyard gate a previous owner built by eye and never quite finished. Hal welds custom brackets, extensions, gate rollers, and reinforcement on site. You describe what has to work, he builds it to work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands, and for Grapevine’s mix of residential and commercial operators, that includes the ones that show up most often: FAAC, BFT, Linear, and Viking. When your operator needs a drive gear, a logic board, or a limit switch, we keep common parts for these systems stocked locally, so a Grapevine repair isn’t waiting on a truck from Houston. If it’s a brand we don’t stock, Hal tells you up front and gives you a straight answer on when it’ll be in. We’d rather you know the real turnaround than hear a promise we can’t keep.
Common Gate Parts & Welding Problems We See in Grapevine Homes
- Leaning hinge posts after a wet spring. Grapevine’s expansive clay swells through the rainy season and shrinks hard in summer, heaving posts out of plumb. A gate that was square in October can be dragging by late April, and the fix starts with the post, not the hinge.
- Binding slide gates on shared driveways. Many Grapevine properties, especially in older neighborhoods and along shared rights of way, don’t have room for a swing gate, so a slide gate was retrofitted into a narrow space. When the ground shifts, the rollers bind and the rack and pinion wears unevenly, which just burns out the motor faster.
- High-cycle commercial failures near Grapevine Mills. The resort and hospitality corridor along SH-26 runs commercial slide gates through thousands of cycles per week. Rack gears, drive motors, and logic boards fail here on an accelerated schedule that most residential gate companies never see.
- Cracked welds on ornamental iron frames. The estate gates near Grapevine Lake are beautiful and heavy, and the soil under them never stops moving. Stress concentrates at the rail-to-picket welds, and once one weld cracks, the load shifts to the next. By the time a gate visibly sags, several welds have already let go.
Pricing for Gate Parts & Welding in Grapevine, TX
| Service | Typical Grapevine Range |
|---|---|
| Hinge replacement (welded, single gate) | $180-$340 |
| Post replacement (footing and reset, incl. materials) | $450-$850 |
| Rail repair (grind, true, re-weld) | $140-$280 |
| Custom welding (brackets, gate rollers, frame repair) | $120-$400 |
| Slide gate roller and rail rebuild | $400-$900 |
Those are real ranges for Grapevine’s market, quoted and agreed before we start. Commercial slide gate work near the Gaylord Texan and Grapevine Mills corridor tends to run higher because the operators are heavier and the cycles are brutal. The free estimate we give you is the price we do the job for. No trip charge inside the county, $40 off any repair over $200, and the 10% discount for seniors and veterans stacks on top of that. Call (877) 610-2993 and Hal will give you a straight number.
We Also Serve Cities Near Grapevine
We work across northeast Tarrant County, so if you’re in Southlake, Colleyville, Coppell, or Euless, the same crew that welds gates in Grapevine is the crew you’ll get. The clay soil follows the county line, and so does the traffic from DFW Airport. Gate Parts & Welding in Grapevine covers the whole area, with the same 90-Day Done Right Promise and the same live person on the phone.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Grapevine
Because the expansive black cotton clay under Grapevine swells with winter and spring rain, lifting shallow footings and pushing posts out of plumb. Then the summer heat dries the soil, it shrinks, and the post settles in a new, wrong position. A post set deep with a proper concrete footing can ride that movement, but a shallow post heaves every cycle. If your gate was square in October and binding by May, the post is the problem. We’ll confirm it on site and give you a written price before we touch anything. Call (877) 610-2993 and we’ll come look for free.
Yes. Shared driveways and rights of way are common across Grapevine, and a slide gate keeps working while we repair it because the gate stays in its track. We rebuilt one on a shared driveway in the 76051 area where a swing gate was never an option: the hinge post had pulled out of plumb in the clay, and the rack and pinion had worn unevenly. We welded a new heavy-gauge rail, set a deeper post footing, and installed fresh gate rollers and a LiftMaster operator, keeping vehicle access open the whole time. Your neighbor won’t miss a single trip in or out. Call (877) 610-2993 and we’ll set a time that works for both of you.
Rack and pinion gears and drive motors fail first. A commercial slide gate along the SH-26 corridor can log more cycles in a year than a residential gate sees in a decade, and that constant start-stop load wears gear teeth and overheats motors until a failure becomes inevitable. Logic boards go next, often right after a power surge from a storm. We keep commercial-grade parts on hand for Grapevine’s high-cycle operators and we weld on site, so the gate isn’t down for a week while it sits in some shop. Call (877) 610-2993 for an honest assessment of what’s failing and what it’ll cost to fix.
We do, and we see those gates every week. The estate properties around Grapevine Lake run heavy ornamental iron frames that usually can’t be replaced with a stock gate off a shelf, which is exactly why welding matters. We re-true racked frames, replace cracked rails at the weld points, and reinforce what the clay has been working against for years. The work is done in the driveway so the look of the gate doesn’t change. Hal’s been welding this type of iron since 2001. Call (877) 610-2993 and we’ll come see it in person.
If you can ask that question, you already know it’s worth checking. Entrapment protection is the sensors and edges that stop a gate when something or someone is in the way, and on an older system it fails silently. You can test it by placing something soft in the gate’s path while it’s closing, but I want to be direct: a gate that doesn’t reverse on contact is dangerous, and the sensors, wiring, and logic board inside an operator all carry voltage that can hurt you. Don’t open the panel and start poking around. Have a certified professional run the check. We test entrapment protection as part of every operator service call in Grapevine. Call (877) 610-2993 and we’ll test it, replace what’s failed, and re-confirm it stops like it should.
Hal built Gatewood Fence & Gate in 2001 on the idea that a gate repair should be done right, on site, at a price the homeowner agreed to before the first weld was struck. That’s how we work in Grapevine. If your gate is sagging, binding, or refusing to open, call (877) 610-2993 now. A live person answers. We’ll set a time, show up in the window we give you, and leave the gate working better than it has in years. You can drive to the shop and look Hal in the eye if you want to. That’s how it should work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine and northeast Tarrant County since 2001.