Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fresno
Gate repair in Fresno, CA typically runs $125 to $900 depending on what failed, and most hinge, post, and realignment work can be handled the same day we take the call. We’re Gatewood Fence & Gate, and we’ve been repairing automatic gates, swing gates, and slide gates across Fresno since 2001. Hal Gatewood answers his phone around the clock because a gate that won’t close in a neighborhood off Clovis Avenue is a security problem, not an inconvenience. Call (877) 610-2993 and you’ll talk to a real person who knows Fresno’s Tule fog and triple-digit heat as well as you do.
Why Gatewood Fence & Gate Is Fresno’s Preferred Gate Repair Company
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice, and he has been repairing gates in the Central Valley since 2001. The address is published. The license number is published. If something goes wrong with a repair, you don’t wade through a phone tree to get it fixed. You call and Hal comes back.
Fresno customers tell us the same thing: they were burned before by a company that quoted one price on the phone and handed over a different one at the door. That doesn’t happen here. The price is quoted and agreed before any work starts. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings him back, no runaround.
We answer the phone 24/7. Not a voicemail, not a call center three states over, not a chatbot. A live person. For a homeowner in Calwa whose gate is hanging by one hinge at 7 a.m., that matters more than any slogan.
Every Gate Repair job starts with someone who actually comes out, looks at the gate, and tells you what failed and what didn’t. We don’t sell replacements for parts that still have life in them. Hal fixes the gate in your driveway rather than hauling it off. If welding is what it takes, we weld on site. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
Our Gate Repair Services in Fresno
Hinge & Post Repair
In Fresno, hinge and post failures are usually a Tule fog story. Months of near-100% humidity saturate the wood or rust the steel at the base of the hinge post. A gate sags in the hinge post, not in the middle, and that is where we start. We dig out the rotted footing, set a new steel post in fresh concrete, and hang the gate so it swings true again. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates get knocked out of square by wind, by a car bumper, by a kid swinging on the frame, or by the ground shifting under a wet winter. Realignment in Fresno often means correcting what two seasons of fog and heat did to the frame. We reset the panel, adjust the hinges, and verify the operator isn’t fighting the gate. A misaligned gate destroys its own opener faster than almost anything else.
Electric Gate Repair
Fresno’s summers routinely exceed 105°F, and that heat cooks control boards. We replace burned boards, rewire corroded terminals, and test the full run cycle under load. We also check the backup battery every fall. The same Tule fog that corrodes terminals over winter will leave you stranded when power flickers during a storm, and the preceding summer heat already shortened that battery’s rated life by 30 to 40 percent.
Automatic Gate Repair
Automatic gate repair in Fresno means diagnosing operator failures, sensor misalignment, and safety-edge problems on systems from LiftMaster, Viking, DoorKing, Ghost Controls, and Linear. If your gate opens but won’t close, or closes and immediately reverses, that’s usually a safety sensor or travel limit issue. We carry parts for nine major brands so the job doesn’t stall halfway through.
Weld & Rust Repair
Rust seizure on iron hinge posts and latch hardware is a predictable late-winter service surge every March in Fresno. By then, months of fog have done their work. We do on-site welding to repair cracked frames, rusted-through pickets, and broken latch mounts, then seal the metal so the next fog season doesn’t undo the repair in one winter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fresno
We service nine gate operator brands, and we stock common parts for Linear, Viking, and Ghost Controls right here in the Fresno area. That means less waiting on a part to ship from some warehouse. Whether your opener is a LiftMaster from a mid-century tract home in Calwa or a newer DoorKing on a Bullard Avenue gated community, the person who shows up has worked on that brand before. We handle the electronics, the mechanicals, and the welding without farming any of it out.
Common Gate Repair Problems We See in Fresno Homes
- Tule fog rust seizure on hinge posts and latch hardware. Weeks of near-saturated humidity in December through February leave iron and steel components wet long enough to seize. By March, we’re freeing stuck hinges and replacing rusted latch assemblies across central and south Fresno.
- Slide gate thermal binding on triple-digit afternoons. Steel wheels expand in the heat and jam the gate in its track mid-cycle, which burns out motors and strips gears. This is a Fresno-specific failure mode, not something you see in coastal cities.
- Operator control board failures after repeated summers over 105°F. Older LiftMaster and DoorKing units without adequate ventilation cook their boards every few years. The symptoms start as intermittent failures and get worse until the gate won’t move.
- Sagging swing gates on mid-century homes. Central and south Fresno, including Calwa and zips 93706 through 93708, have dense tracts of 1960s and 1970s homes whose original wood-framed or wrought-iron gates were never designed for automation. Adding an opener to a gate that wasn’t built for one stresses old hinge posts until they rot or snap.
Pricing for Gate Repair in Fresno, CA
Hinge and post repair in Fresno typically runs $180 to $450, depending on whether we’re resetting an existing post or digging and pouring a new steel one. Gate realignment is usually $125 to $250. Electric gate repair, including board replacement, averages $225 to $650. Weld and rust repair runs $150 to $400 depending on how much metal needs cutting and sealing. Slide gate track corrections from thermal binding typically land between $200 and $500.
We quote the price before any work begins, and that price doesn’t change at the door. We offer $40 off any repair over $200, no trip charge inside Fresno County, and a permanent 10% discount for seniors and veterans. You’ll also get a free second opinion on any written estimate from another company. Call (877) 610-2993 for an exact quote – estimates are free.
HOA and Gated Community Gate Repair in Fresno
If you live in a gated community along the Bullard Avenue corridor or in one of the newer HOA-managed neighborhoods on Fresno’s north side, your gate isn’t just yours. Shared entry systems mean repairs affect every resident, and most HOAs require architectural approval for any change to gate style, height, or finish. A repair that matches the existing gate is usually simpler than a replacement, but the management company still wants documentation and a licensed contractor with insurance.
We work with Fresno property managers and HOA boards, which means we know how to keep a shared entry gate operational while repairs happen. We don’t shut a community down for a week. We stage the work, keep one lane or one pedestrian gate open where the design allows it, and tell residents what’s happening and when it’ll be done. For homeowners, we can provide the paperwork your HOA needs before the work starts, so approval doesn’t stall the repair. Show me the gate closing on its own and I’ll show you where it’s failing – and we’ll explain that to your board in plain language, not contractor jargon.
We Also Serve Cities Near Fresno
Our Fresno service area covers the neighborhoods close by too. We run calls to Old Fig Garden, Clovis, Fowler, and Sanger on a regular schedule, so if you’re outside the immediate city limits and need gate repair, you’re still inside our range. Same repair-first approach, same 90-Day Done Right Promise.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fresno
Most Fresno HOAs require approval for any visible change to a gate, especially in gated communities where the entry system is shared property. A straight repair that matches the existing gate usually moves through faster than a replacement or a style change. We provide the spec sheet and contractor documentation your management company needs, and we’ve worked with Fresno property managers long enough to know what they ask for.
Steel slide-gate tracks thermally expand in triple-digit heat, which binds the wheels and jams the gate mid-cycle. It’s a Fresno problem, not a coincidence. We correct the track spacing, adjust the wheel clearance, and verify the operator isn’t over-amping against the extra load. Leaving it alone strips gears and burns out motors.
Check the control board terminals for corrosion before fog season ends, and replace the backup battery every fall. The fog leaves terminals wet for weeks, and the battery is already degraded from the previous summer’s heat. We offer a fall maintenance check that catches both problems before they strand you. Call (877) 610-2993 to schedule one.
The previous summer’s heat shortened that battery’s rated life by 30 to 40 percent, and the fog-season cold finished it off. Backup batteries in Fresno fail from the heat months before the outage happens. We test them under load in the fall so you’re not standing in the dark with a gate that won’t move.
Yes. We stage the work so one pedestrian gate or one vehicle lane stays open where the layout allows it, and we coordinate with your management company on timing. A shared entry gate can be repaired without a week-long shutdown, but it requires planning, which is part of what we do. Exact timing depends on the gate design, so call (877) 610-2993 and we’ll walk you through it.
Call Gatewood Fence & Gate for Gate Repair in Fresno
If your gate is sagging, stuck, or dead in the driveway, call (877) 610-2993. We answer live, 24/7. The price is quoted and agreed before any work starts, every job carries the 90-Day Done Right Promise in writing, and Hal Gatewood is the one who stands behind it. He’s been repairing gates since 2001, his address is published, and he’s the name on the shop. No voicemail, no dispatch queue, no call center. Just a local crew that fixes the gate in your driveway and comes back if it isn’t right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fresno since 2001.