Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Fresno, CA
Gate repair in Fresno typically runs $180 to $340 for hinge, post, and alignment work, with automatic opener and control board fixes landing between $240 and $500 depending on what failed. You’ll get the price before any work starts, and a live person on the phone when you call (877) 610-2993. Fresno’s two-season stress cycle, winter Tule fog followed by triple-digit summers, means your gate fails differently here than it would in Clovis or Madera. We diagnose for that reality.
Why Fresno Homes Are Different
Fresno sits in the middle of the San Joaquin Valley, and the weather here works in extremes. From December through February, Tule fog hugs the valley floor for days or weeks at a time. That fog keeps iron and steel gate hardware in near-100 percent humidity, and every March we see a surge of rust-seized hinges and corroded latch hardware across the city. Then June arrives, and the problem flips. Triple-digit heat bakes operator housings, cooks circuit boards, and expands steel slide-gate tracks until they bind. A gate that closed fine in June will not move in August, and the cause is almost always thermal.
The housing stock compounds it. Central and south Fresno, including Calwa and the 93702 through 93706 zip codes, are dense with 1960s and 1970s tract homes. Those original wrought-iron and wood-framed driveway gates were never designed to carry an automated opener. North Fresno along the Bullard Avenue corridor has newer gated communities with HOA-managed entry systems and their own set of demands. And ringing the city, the agricultural fringe lots have heavy pipe-rail swing gates sized for farm driveways that need commercial-grade hinges and closers. Different homes, different failures, same fix: someone who actually shows up.
Gate Repair in Fresno
Gate repair in Fresno breaks down into a few predictable problems. Hinge seizure from Tule fog, thermal expansion on slide gates, and control board failures in HOA communities. We handle all of it, on site, with welding done in your driveway rather than hauling your gate off to some shop. The full Gate Repair process starts with a call to (877) 610-2993 and a straight answer about what’s likely wrong.
Electric Gate Repair
Electric gate repair in Fresno usually means the operator quit responding, the safety sensor won’t clear, or the keypad stopped talking to the board. We service nine major brands including Linear, Viking, Ghost Controls, and DoorKing. If a control board fried in the heat, we diagnose it on site, quote the fix, and get your gate moving again. The price is agreed before we touch a wire.
Automatic Gate Repair
Automatic gate repair in Fresno is a February and August business. February brings the Tule fog that corrodes terminals and leaves batteries dead when power flickers. August bakes the operator housing until thermal expansion seizes slide gates in their tracks. Automatic gate opener and control board work runs $240 to $500, parts included, quoted up front. We check the backup battery every fall for a reason, the summer heat has already shortened its rated life by 30 to 40 percent, and the fog will finish it off by March.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Fresno’s mid-century homes in Calwa and the surrounding 93702 through 93706 zip codes were built with wrought-iron and wood-framed gates that were never meant to carry an automated opener. The hinge posts rust, the gate leans, and if you fix the panel without the post, you’ll fix it twice. Hinge and post repair generally runs $180 to $320, depending on whether we’re setting a new post in concrete or salvaging the existing footing. We cut out the corroded post, set a new one in concrete, and realign the gate so it closes square.
Gate Realignment
Fresno’s clay soil moves. It swells when the fog sits for weeks and it cracks when triple-digit heat bakes it dry. That movement throws gate posts out of plumb, and a gate that dragged by an inch in January will catch by June. Realignment without new parts runs $150 to $275. We realign the hinges, shim the posts, and in most cases weld a reinforcing plate so the gate holds its line through the next wet-dry cycle.
Does the HOA in Fresno need to approve my gate repair before work starts?
Usually, yes, if your gate is visible from the street or falls under the HOA’s architectural guidelines. Most Fresno HOAs require approval for changes to gate style, height, finish, or hardware, but a straight like-for-like repair of a broken hinge or failed opener often doesn’t trigger a full review. Check your CC&Rs first, or have us describe the work in a written repair proposal your board can sign off on.
Why does my automatic gate fail every winter in Fresno?
In Fresno, it’s usually the Tule fog. From December through February, that dense valley fog leaves iron and steel gate components in near-100 percent relative humidity for weeks at a time, corroding terminals, latch hardware, and hinge pins. Then a cold snap drains the backup battery that summer heat already weakened, and the gate quits on a rainy night. The fix is usually corrosion cleanup plus a battery replacement before the next storm.
Gate Installation in Fresno
Gate installation in Fresno runs between $1,400 and $6,500 for most residential jobs, with a full swing or slide gate and operator typically landing at $2,800 to $4,200. The two things that wreck gates here are winter Tule fog and summers that touch 105°F before noon, so we size footings, posts, and track expansion for that reality from day one. Our Gate Installation work starts with a free measure and a written price, never a guess.
Driveway Gate Installation
Fresno driveway gates come in two flavors: the lightweight aluminum pieces on newer north Fresno homes and the heavy wrought-iron or pipe-rail gates ringing older central Fresno and Calwa properties. A new driveway gate here runs $2,200 to $5,800 installed, depending on width, material, and whether you want an automated operator. We size the post footing for the actual gate weight, not the brochure weight. In Fresno clay, that matters.
Pedestrian Gate Installation
Side-yard pedestrian gates take a beating in Fresno because they’re the gate people actually use every day. We install wood, steel, and ornamental pedestrian gates from $600 to $1,900, including a proper latch and closer. If you’re in an older neighborhood where the side gate hasn’t been touched in decades, we check the post before we hang anything. Rot starts at the ground line and hides there for years.
Sliding Gate Installation
Sliding gates make sense on Fresno lots where a swing gate would block a car or dumpster. We install steel-wheeled slide gates from $2,800 to $7,200, and the track is where the magic happens. Fresno’s triple-digit summers expand steel track enough to bind a poorly set slide gate, especially on the heavy pipe-rail driveway gates you see on agricultural fringe lots ringing the city. We set the track with expansion allowance from day one, so July doesn’t leave the gate stuck half open.
Swing Gate Installation
Swing gates remain the classic Fresno choice, from single gates on mid-century Calwa driveways to double gates on the larger lots along Clovis Avenue and beyond. Single swing gate installation runs $1,900 to $5,600. The hinge post carries the entire gate, so we don’t hang a panel on a post that’s already leaning. If the post needs resetting or a new 36-inch footing, we do that first and build the rest on top of it.
Can you install a gate operator on my mid-century Calwa driveway gate that wasn’t built for automation?
Yes, in most cases we can, provided the gate panel is structurally sound and the hinge post is still true and set deep enough to carry the added load. Homes built in the 1950s through 1970s in central and south Fresno, including Calwa and zips 93702 through 93706, rarely have posts designed for an automated opener. We strengthen the post, rehang the panel, and then install the operator so it’s not fighting the gate from day one.
When is it cheaper to replace my 40-year-old swing gate instead of retrofitting it?
Replace it when the hinge post is rotted or leaning and the panel itself has warped or cracked past the point of a sound repair. If we need to pour a new 36-inch post footing, reset the hinge post, weld reinforcement to the panel, and then install an operator, that work can run $2,000 to $3,400 on its own. Sometimes a new single swing gate makes more sense, and we’ll show you both numbers honestly.
Gate Motor & Opener in Fresno
When a Fresno gate opener quits, it’s rarely at a convenient time. It’s seven in the morning on a workday, the car is trapped behind a driveway gate that won’t move, and you’re already late. Gate motor and opener problems in Fresno are different from anywhere else in California because the Valley’s weather works against your hardware in two directions. Our Gate Motor & Opener service covers diagnosis, repair, and replacement for every major brand.
Motor Repair
Most Fresno motor failures follow a pattern you can set your calendar by. Late March brings rust-seized limit switches and corroded terminal blocks from three months of Tule fog. August brings fried control boards and thermal overload trips after weeks of 105-degree heat baking the operator box. Motor repair jobs, like a bad control board or a stripped gear, usually run $180 to $425. We diagnose and repair on site, and we stock common replacement boards, capacitors, and limit switches so the fix usually happens in one trip, not two.
Motor Installation
A proper motor installation in Fresno starts before the opener ever gets mounted. We check the gate itself: the hinge posts, the sag in the panel, the condition of the track if it’s a slide gate. A lot of central Fresno homes in the Calwa area have mid-century driveway gates that were built for manual use, and bolting a new motor to a misaligned gate dooms the opener within a year. A straight motor swap on a small residential swing gate typically runs $450 to $850, including the opener and installation labor.
Slide Motor
Slide gates run on steel tracks, and steel tracks in Fresno have two enemies: rust from winter fog and thermal expansion in summer. A slide motor that burned out in July might have been working fine in April, but the gate was binding just enough in the heat to overload the motor every time it ran. Most Fresno slide gate motor installations land between $900 and $1,500 depending on gate weight and track condition. We cover the motor itself, the rack and pinion alignment, and wheel replacement.
How much does gate motor repair cost in Fresno?
Most Fresno gate motor repairs run $180 to $425, depending on whether it’s a control board, a capacitor, a limit switch, or a stripped gear. A full motor replacement typically lands between $450 and $850 for a swing gate and $900 to $1,500 for a slide gate. The price is set before we start, and every quote is free. Call (877) 610-2993 and describe what the gate is doing.
Do you handle emergency gate opener failures in Fresno?
Yes. A live person answers at (877) 610-2993 24 hours a day, 7 days a week, and we treat a gate that won’t open as a priority call. If your car is blocked in or the gate is stuck open leaving your property exposed, tell us that when you call. We keep the schedule flexible for exactly those situations, and same-day service is available for most of Fresno.
Gate Access Control in Fresno
Gate access control in Fresno typically runs $350 to $1,250 for keypad or remote systems and $1,800 to $4,500 for phone entry or video intercom on an existing driveway gate. Most jobs are finished the same week we order parts. The two local forces that wreck access control here are the same two that wreck everything else: Tule fog corroding keypad terminals and summer heat frying control boards. Our Gate Access Control work covers keypads, remotes, phone entry, and card readers, installed and programmed on site.
Keypad Entry
A keypad entry system in Fresno runs $350 to $850 installed on an existing gate, depending on whether we’re mounting a standalone unit or tying it into an operator. In neighborhoods like Calwa and the mid-century tract areas off Fresno Street, we regularly retrofit keypads onto iron gates that were built long before automation existed. You get a code, your kids get a code, the gardener gets a temporary code, and nobody needs a clicker that gets lost in the truck.
Remote Control
Remote control systems are the simplest upgrade, typically $250 to $600 for a receiver and remotes configured to your operator. We service and program remotes for LiftMaster, DoorKing, Viking, Ghost Controls, and Elite. If you’ve been holding a clicker against the windshield hoping the gate somehow catches the signal, that’s a receiver or antenna issue, not a reason to replace the whole operator. We fix the actual problem.
Phone Entry
Phone entry systems in Fresno run $1,500 to $3,800 installed, and they’re the right choice for rental properties, duplexes, and any gate where visitors need to announce themselves. You connect the unit to your phone line or cell, and when a visitor dials, your phone rings. We install and program these regularly in the agricultural fringe lots ringing Fresno, where the driveway is long and the house is too far to walk to the gate. You can buzz someone in from the kitchen.
Card Reader
Card readers make sense for HOAs, apartment complexes, and anyone managing multiple users who shouldn’t all have the garage code. A single-door card reader system with a power supply and egress button typically costs $900 to $2,500 in Fresno. North Fresno properties along Bullard Avenue, especially gated communities with HOA-managed entries, call us for this work because a card reader gives the board an audit trail. A remote control doesn’t tell you who came through at 2 a.m. A card reader does.
Can you come today for an emergency gate access failure?
Yes. If your gate won’t open, your keypad is dead, or your phone entry system is locking you out, call (877) 610-2993. We keep common access control parts stocked in Fresno, so we can often complete the repair on the first trip. The person who answers will tell you when we can be there, and he’ll mean it.
Does the warranty cover access control work in Fresno?
Every access control job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back, no runaround and no “let me check with the manager.” We stand behind the work, period. That promise is stamped on every invoice, not buried in fine print.
Gate Parts & Welding in Fresno
Gate parts and welding in Fresno usually comes down to one question: can the existing gate be saved, or is the damage too far gone? In most cases, the gate can be repaired on site. We weld in your driveway, replace only what’s actually worn out, and charge what we quoted before the first cut. The full Gate Parts & Welding approach means your gate stays in your driveway instead of getting hauled off to a shop.
Hinge Replacement
Hinge replacement is the most common repair we do in Fresno, and it’s usually the difference between a gate that works and one you have to lift to close. Rust-seized hinge pins are a predictable sight every March, after months of Tule fog have worked into the barrels. Hinge replacement on a standard swing gate runs $180 to $340, depending on whether one hinge or the full set needs cutting out and welding. We cut out the old hinge, weld in a new heavy-duty barrel and pin, and realign the gate so it swings without dragging.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Fresno, post failures come from two directions: winter moisture rusting the footing, and summer heat making the soil shift. Post replacement runs $350 to $700, including digging out the old footing and pouring new concrete. We dig out the old footing, pour a deeper concrete base, and weld in a post that’s actually sized for the load. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Bottom rails rust first. That’s true anywhere, but in Fresno the Tule fog accelerates it, and top rails on cheap steel gates fatigue at the weld joints from years of opening and closing in heat. Rail repair runs $150 to $400, depending on how much steel needs replacement. We cut out the damaged section and weld in fresh steel, then grind and paint so the repair doesn’t look like a patch. If the rail is too far gone, we’ll tell you straight and replace the frame section instead of pretending a weld will hold.
Custom Welding
Not every gate problem has an off-the-shelf part. Fresno’s rural fringe has a lot of pipe-rail and chain-link swing gates sized for farm driveways, and the hardware stores don’t carry hinges that fit them. Custom welding jobs start around $120 for a simple bracket and go up from there based on fabrication time. We fabricate on site: custom brackets, reinforcement plates, tab mounts for operators, and odd-sized hinge assemblies. If it’s steel and it’s broken, we can usually weld it stronger than it was originally.
Why do so many Fresno swing gates sag at the hinge post rather than the panel?
The hinge post carries the entire weight of the gate, and in Fresno it’s fighting two enemies: winter fog rust that corrodes the post footing, and summer soil shifts that loosen the footing in the ground. When the post leans, the gate sags even if every weld on the panel is still solid. The fix is replacing the post and its footing, not just shimming the hinges and hoping.
Should I repair an obsolete control board on my older gate operator or replace the whole unit?
If the board is still available and the operator is otherwise sound, repairing it usually makes sense, especially when a rebuilt board costs $150 to $300. But if the board has failed twice, or it lacks modern safety inputs and the gearbox is worn, replacement is the cheaper long-term answer. We’ll show you the numbers for both options and let you decide, and the price is quoted before any work starts.
Brands We Service in Fresno
We’re certified to service nine major gate brands, and we stock common parts locally so repairs don’t wait on shipping. That covers Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. See our brands for the full list. Most common control boards and limit switches are on hand, which means one trip instead of two.
Pricing for Gate Repair in Fresno, CA
| Service | Typical range in Fresno |
|---|---|
| Hinge & post repair | $180 - $320 |
| Weld & rust repair | $200 - $400 |
| Automatic opener & control board work | $240 - $500 |
| Realignment without new parts | $150 - $275 |
| Pedestrian gate installation | $600 - $1,900 |
| Single swing gate installation | $1,900 - $5,600 |
| Sliding gate installation | $2,800 - $7,200 |
| Motor repair | $180 - $425 |
| Motor replacement (swing gate) | $450 - $850 |
| Motor replacement (slide gate) | $900 - $1,500 |
| Keypad entry | $350 - $850 |
| Post replacement | $350 - $700 |
What moves the number in Fresno is usually rust. Tule fog corrosion means more cutting and plating than a comparable job would need in a drier city. The quote is the price, agreed before any work starts, and the invoice matches the number you approved every time.
Neighborhoods We Serve in Fresno
We work throughout Fresno, from the mid-century tract streets of Calwa to the gated communities along Bullard Avenue and the farm-lot driveways on the agricultural fringe. Response time is normally same-day or next-day, depending on the season and where you are in the county.
- Calwa and central-south tract neighborhoods
- Bullard Avenue corridor and north Fresno gated communities
- Areas around Clovis Avenue and the Yosemite Freeway
- Fresno’s agricultural fringe and large farm-lot driveways
Service Area - Cities Near Fresno
Our crew serves Fresno, CA and the surrounding communities throughout the Central Valley. If you’re in Old Fig Garden, CA, Clovis, CA, Fowler, CA, Sanger, CA, or Selma, CA, call (877) 610-2993 and we’ll schedule a visit. The same pricing applies across the whole service area.
Serving Fresno, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Fresno and the communities around it; dispatch is coordinated from our Fresno, Central Valley office. The map shows the Fresno coverage area; if your address is on it, we can help.
Fresno areas covered: Calwa.
Also serving nearby: Fresno, CA, Old Fig Garden, CA, Clovis, CA, Fowler, CA, Sanger, CA, Selma, CA.
FAQs About Gate Repair in Fresno
For urgent failures, like a gate that won’t open with a car trapped inside, we reach most Fresno addresses the same day you call. Our team works out of the Central Valley office and covers neighborhoods throughout the city, from Calwa to the Bullard Avenue corridor. Call (877) 610-2993 and you’ll get a straight answer on today’s schedule.
Most straight repairs like hinge replacement, welding, and operator swaps don’t require a permit in Fresno. A full gate replacement with new posts and footings may, depending on the city’s current code, especially if you’re in an HOA with architectural review. We’ll tell you what applies to your property before we quote.
Yes. We work Calwa, central Fresno, north Fresno along Bullard Avenue, and the agricultural fringe lots ringing the city. Zip codes include 93706, 93707, 93708, and 93709. No trip charge inside the county, and $40 off any repair over $200. Call (877) 610-2993 for a free estimate, and Hal will tell you when he can be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath