Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Duluth
Gate repair in Duluth, GA typically runs $225-$475 for a hinge and post fix, $180-$340 for operator or opener work, and $150-$400 for weld and rust repair that keeps an iron gate from failing further. Most of what we see in Duluth gets fixed same week, often same day, and the price is always quoted and agreed before we touch the gate. That’s how Hal has worked since 2001, and it’s why homeowners around Sugarloaf Parkway and Old Peachtree Road keep his number saved in their phones. If your gate is grinding, sagging, or stuck half-open on a Sunday afternoon, call (877) 610-2993 and a live person answers, every time.
Why Gatewood Fence & Gate Is Duluth’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, his address is published, and he has been at this since 2001, which means he is not passing through and not hiding behind a call center. When you call about a gate in Duluth’s 30097 ZIP code, you’re talking to someone who knows that Sugarloaf Country Club gates tend to be heavy wrought-iron double-swing systems on big masonry columns, not the lighter aluminum the mid-range subdivisions have. That changes how we approach the repair before we even pull up the driveway.
Duluth homeowners keep calling us because the person who shows up is background-checked, uniformed, and knows which side of the hinge post the red clay is pushing on this season. Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no third-party dispatch. The shop is down the road, not three states away, and that is the oldest accountability there is.
Our Gate Repair Services in Duluth
Electric Gate Repair
Electric gate repair in Duluth usually means a LiftMaster MA-series or Linear operator that has been fighting a gate that seasonal red-clay heave has pushed out of alignment. The operator is rarely the root cause. We check the swing arc, the hinge post, and the gear engagement first, then we either repair the existing operator or replace it with one properly sized for the gate’s weight. We stock parts for nine major brands, so a 30097 homeowner isn’t waiting for a slow shipment while their subdivision entrance sits inoperable.
Automatic Gate Repair
Automatic gates around Duluth’s HOA communities take more abuse than most people realize. Wide ornamental swing gates catch ice in January and February, and that sudden weight shock overworks older actuators until a limit switch or gear set fails. We calibrate operators to the actual gate weight and the actual soil movement here, not to what the manual assumes. Safety photocells and loop detectors get checked on every automatic gate repair, because entrapment protection is code in Gwinnett County and it’s also just the right way to do the job.
Hinge & Post Repair
Hinge and post repair is the most common gate call in Duluth by a wide margin. A gate sags in the hinge post, not in the middle, and that is where we start. Duluth’s brick-front colonials and craftsman homes frequently have iron gates mounted to brick or stacked-stone pillars, and the failure point is almost always where the hinge base meets the masonry. Gate Repair work on these posts means we are often re-setting the footing rather than just swapping a hinge, because the red clay moves, the post shifts, and the gate binds on the operator. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gate realignment in Duluth is seasonal work. The expansive clay under Gwinnett County swells and shrinks through wet and dry cycles, and a gate that swung perfectly in April can bind in August. We re-level posts, re-hang leaves on adjustable hinges, and re-set the operator travel limits so the gate closes cleanly without slamming or stalling. For HOA entrance gates, we also re-calibrate loop detectors and safety edges to the new swing arc, because a gate that drifts even a few degrees will trip its own sensor and refuse to close.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duluth
We service the operators and actuators already installed in most Duluth communities, including Linear, Viking, and DoorKing, plus LiftMaster, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. Because we’ve been repairing these brands across Gwinnett County for over two decades, we know which parts fail on which generation. We keep commonly needed boards, limit switches, and remote receivers in stock, so a Duluth gate usually gets fixed in one visit instead of two. If you have a Viking actuator that’s grinding or a DoorKing board that’s flashing an error, call and we’ll tell you over the phone whether it sounds like a quick fix or a full replacement before you spend a dime.
Common Gate Repair Problems We See in Duluth Homes
- Hinge post rot where iron meets brick. Georgia red clay holds moisture against the steel at the base of the post, and that’s where rust eats through first. We cut out the corroded section, weld in a new stub, and often coat the base with a rust-inhibiting treatment that buys years.
- LiftMaster MA-series operators stripping gears. Expansive clay shifts gate alignment seasonally, so the operator fights the sag. That strain strips the rack and pinion on older MA-series units, and the gate starts grinding instead of cycling cleanly.
- Ice-storm damage to wide swing gates. Rare but real ice events in January and February load up ornamental gates until the weight torques hinge brackets loose or stalls an actuator mid-cycle. Show me the gate closing on its own and I’ll show you where it’s failing.
- Post heave from Duluth’s clay soil. Footings set 20 or 30 years ago without deep anchor bolts have shifted enough to bind gates that were perfectly true last season. We re-set posts into undisturbed soil, often with galvanized anchors, so the repair holds through future wet and dry cycles.
Pricing for Gate Repair in Duluth, GA
A typical hinge and post repair in Duluth runs $225-$475, depending on whether we’re working on a single residential gate or a double HOA entrance gate with heavier operators. Automatic gate operator repair lands in the $180-$340 range, and weld and rust repair is usually $150-$400, depending on the amount of corroded material that has to be cut out and rebuilt. We charge no trip fee inside Gwinnett County, and there’s $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Every estimate is free, and the price is always set before work starts, in writing. That’s not a footnote. That’s the deal. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Duluth
Gatewood Fence & Gate serves Duluth and the surrounding area, including Norcross, Lawrenceville, Suwanee, and Peachtree Corners. If you’re a few miles outside Duluth proper, the same live person still answers the call, and the same 90-Day Done Right Promise still covers the work. No trip charge inside the county.
Serving Duluth, GA - Our Local Coverage Area
We’re based in the Duluth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Duluth
The HOA-governed subdivisions built between 1990 and 2008 along Sugarloaf Parkway and Old Peachtree Road are now hitting the 20-30-year failure window all at once. The LiftMaster and Linear operators installed in those communities are wearing out at the same time the iron hinges are corroding and the red clay is heaving posts out of alignment. It’s a scheduling issue, not a coincidence. If your community’s gate is part of that wave, call (877) 610-2993 and we’ll come look at it, free.
Yes. Gwinnett County’s expansive clay absorbs water and swells, then shrinks when it dries, which heaves post footings seasonally. A gate’s hinge post moves a fraction of an inch and the latch side drops an inch, and suddenly the operator is fighting a binding corner instead of free-swinging weight. We fix the problem at the footing, not just at the hinge, which is why a Gatewood repair holds while a hinge swap alone would leave you calling us back next season.
Ice accumulates on the wide ornamental panels, adding hundreds of pounds of sudden load to an actuator that was sized for normal conditions. Older LiftMaster MA-series and Linear units were sized for normal conditions, not ice loads. The operator either stalls mid-cycle or torques a hinge bracket loose. We see the aftermath every January. If your community gate is stuck open after a freeze, call (877) 610-2993 and we’ll reset the hardware and recalibrate the swing arc.
Yes. Gwinnett County requires entrapment protection on automatic gates, including safety photocells, edge sensors, or both depending on the gate type and operator class. We check those components on every automatic gate repair in Duluth, because a gate that closes on a car or a person is not just a liability, it’s a code violation. If your gate’s safety sensors were never properly set after a previous repair, that’s one of the first things we correct.
Always the hinge post. A gate sags in the post, not in the middle. If you straighten the panel but leave the post leaning or the footing shifting, the gate will sag again within a season, and you’ll have paid twice for the same repair. We start every sagging gate job at the post footing and work up from there. Call (877) 610-2993 for a free assessment and we’ll tell you exactly what the post needs before we touch the panel.
Contact Gatewood Fence & Gate for Gate Repair in Duluth, GA
If your gate is sagging, grinding, stuck, or running its operator until something strips, don’t wait for a bigger bill at the end of the month. Call (877) 610-2993 today. A real person answers, day or night, and we’ll walk through what you’re hearing over the phone before sending anyone out. Free estimates, honest pricing, and a 90-Day Done Right Promise written on the invoice. You’ll talk to someone whose name is on the shop, and he’ll be the one who shows up. That’s how it’s been since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Duluth since 2001.