Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dallas
Gate repair in Dallas usually means one of three things: a post that’s leaning after the clay soil shifted, an opener that quit after a 105-degree week, or a gate that’s dragging so badly you have to get out of the car to muscle it open. We fix all three, and we do it the same day when it’s an emergency. Hal Gatewood has been welding and repairing gates since 2001, and he’ll be the one walking your alley in Oak Cliff or your driveway in East Dallas. Call (877) 610-2993 and a live person answers, day or night. No call center, no third-party scheduler. Just us.
Why Gatewood Fence & Gate Is Dallas’s Preferred Gate Repair Company
We’re the company Dallas homeowners call when a national outfit already burned them once. The story is usually the same: a phone quote, a technician who shows up late in a rental truck, and an invoice that doesn’t match what was promised. Hal Gatewood put his name on this shop in 2001, and his address is published. He sees the same faces at the hardware store. That’s the oldest accountability there is.
Our Gate Repair crews work all over Dallas, from the bungalow alleys of East Dallas to the ranches of North Dallas. We respond fast because we live here. A live person answers the phone 24/7, not a voicemail tree. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print.
We also stock parts locally for Dallas customers. That matters when a Viking opener fails on a Saturday and the manufacturer’s shipping estimate says Tuesday. We keep boards, remotes, hinges, and safety edges on the truck for the brands we service most. You shouldn’t have to wait a week because a warehouse in another state is backed up.
Our Gate Repair Services in Dallas
Hinge & Post Repair
Most gate failures in Dallas start in the post, not the panel. The Blackland Prairie clay under the 75201-75208 ZIP codes swells after rain and cracks during drought, and your gate posts ride that movement like a boat in a harbor. We cut, weld, and re-plumb posts in place. If the post is rusted through at the base, we weld in a new section rather than replacing the whole run. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a swing gate in Dallas drags or won’t latch, the hinges are rarely the root cause. The post has tilted. We re-square the frame, shim and re-anchor the post, and reset the hinges so the gate swings true. Then we check it again in three months, because this soil doesn’t hold still. A gate that’s correctly aligned in May will usually need a small adjustment by October. That’s the geology, not your gate’s fault.
Electric Gate Repair
Electric gate openers in Dallas take a beating from heat and UV. Wiring harnesses on pre-2010 LiftMaster and FAAC units degrade faster here than the manufacturer’s specs assume. Capacitors swell. Control boards cook. We diagnose the actual failure and repair it when we can, instead of selling you a whole new operator because one board failed. Hal’s repair-first philosophy is simple: if it can be fixed in your driveway, that’s where we fix it.
Automatic Gate Repair
Automatic gates add a second layer of complexity: safety edges, photo eyes, loop detectors, and opener limit switches. We service Dallas automatic gates daily, and we handle the brands most common around here. A gate that reverses or fails to close usually has a sensor out of alignment or a loop detector that’s misreading. We track those down and get your gate closing on its own again. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We’re certified to service nine major gate brands, and the ones we see most in Dallas driveways are Viking, Ghost Controls, and DoorKing. Older DoorKing slide gates from the 1990s still populate a lot of Oak Cliff alleys, and we keep replacement boards and rack hardware in stock for them locally. If you’ve got a Legacy or an older FAAC, we service those too. If we don’t have the part on the truck, it’s usually a day away, not a week.
Common Gate Repair Problems We See in Dallas Homes
- Clay-heaved hinge posts: After a heavy spring rain swells the Blackland clay, swing gates in East Dallas and Oak Cliff tilt out of plumb and start dragging or failing to latch. The fix is re-plumbing the post, not just tightening hinge bolts.
- Slide-gate track separation: The bottom track on alley-facing slide gates buckles or separates from the concrete pad because the clay underneath shifted. The track itself is usually fine. The repair is releveling and re-anchoring the pad.
- Legacy opener failures in heat: Dallas summers routinely exceed 105°F, which expands metal frames, warps older operator housings, and degrades wiring. A Gatewood tech recently reworked a 1996 DoorKing that kept tripping its thermal overload. The board was fine; the airflow to the motor wasn’t.
- Post-base rust on mid-century homes: The 1940s and 50s ranch homes in East Dallas often have originals post bases buried in soil that holds moisture against the metal. We cut out the rusted section, weld in a new saddle, and seal it so it doesn’t repeat.
Pricing for Gate Repair in Dallas, TX
A typical hinge and post repair in Dallas runs $180-$340 depending on how much steel we have to cut out and whether the post needs re-anchoring. Gate realignment sits in the $150-$275 range. Electric gate repairs like a board replacement or a new safety edge typically run $250-$600, depending on the operator and whether we’re repairing or replacing the board. A full opener replacement, if the old one can’t be saved, usually starts around $900 installed. We quote the price before any work starts, in writing, and it doesn’t change at the door. And we offer $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Estimates are free inside Dallas County.
We Also Serve Cities Near Dallas
If you’re in Highland Park, University Park, Richardson, or Irving, we cover those too. Our Gate Repair in Dallas service area extends across the metro, and the same crew that works your neighborhood will be the one who shows up. Call (877) 610-2993 and tell us where the gate is.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Dallas
Because the issue was never the hinges. The Blackland Prairie clay under East Dallas swells when it rains, and the post the gate hangs from tilts with it. Adjusting hinges without re-plumbing the post is a temporary fix that lasts until the next storm. We re-plumb the post, anchor it properly, and then set the hinges. Call (877) 610-2993 and we’ll take a look.
Yes. We retrofit photo eyes, safety edges, and close-force limiters onto older automatic gates in Oak Cliff regularly. A lot of gates hung in the 1980s and 1990s had no entrapment protection, and current standards expect it. We can bring most legacy operators up to a safe operating standard without replacing the whole gate. Give us a call and we’ll tell you what your gate needs.
That’s a classic Dallas clay-heave failure. The concrete pad under your gate’s bottom track has shifted as the clay soil beneath it expanded and contracted. The track is buckling because its footing moved, not because the steel failed. The real repair is pulling the track, releveling and re-anchoring the pad, and reinstalling the rack. We do this repair in Oak Cliff and East Dallas more than anywhere else in the metro. Call (877) 610-2993 for a free estimate.
Annually is not overkill. In the 75201-75208 ZIP codes, we’ve measured posts shift 1-3 inches in a single season. We recommend a post check every 12 months, usually in late spring after the heavy rain cycle ends. It costs less than waiting for the gate to fail. If you’re in a clay-heavy area like Oak Cliff or East Dallas, the annual check is the difference between a small adjustment and a full post replacement.
Usually the hinge post is the problem, and fixing it is cheaper than repairing or rebuilding the panel. On a 1940s bungalow gate, the post has been in Dallas clay for 80 years, and it’s usually rusted at the base or leaning. We cut out the bad section, weld in a new base, and re-anchor. The panel almost never needs a full rebuild. Get a free estimate from us before you pay for panel work you don’t need.
Call Gatewood Fence & Gate for Dallas Gate Repair
If your gate is dragging, leaning, or stuck, call (877) 610-2993. We answer 24/7 with a live person. We’ll give you a straight price before any work starts, and Hal will stand behind the work with the 90-Day Done Right Promise. His name is on the shop and on every invoice. That’s the only guarantee that means anything in Dallas.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dallas since 2001.