Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Conway
Gate repair in Conway, FL doesn’t have to mean waiting three days for a callback. Most gate failures around the Conway chain of lakes need same-week service: a sagging ornamental swing gate, an opener that quit after the afternoon storms, a post that shifted after a heavy rain. We know these streets: Lake Conway Drive, Anderson Road, Hoffner, the lakefront lots off Lake Barton. We carry common parts for FAAC, LiftMaster, Viking, and BFT openers on the truck, so most Conway calls are one trip, not two. Call (877) 610-2993 and you’ll get a live person who knows exactly where 32812 is and what the weather this week is doing to your gate hardware.
Why Gatewood Fence & Gate Is Conway’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his approach hasn’t changed: fix what’s broken, don’t sell what isn’t. That matters in Conway, where the best homes are custom jobs and a wrong guess means a week of waiting on a part. Homeowners around Lake Conway and Lake Barton have learned they can drive to the shop and talk to the person whose name is on the invoice. No phone tree, no estimator who’s never held a welder.
Our Gate Repair team works on the high end of Conway regularly: ornamental iron driveway gates on lakefront estates, matched intercom and camera entry, underground operators that have to run silent because the neighbors are close. That’s not a side business for us. It’s what we do in Conway every week. And every job, from a hinge bushing on a 1965 ranch gate to a full realignment on a wrought iron palace, carries our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround.
Conway homeowners call us because we answer the first time. A live person, 24/7, who can tell you whether a technician can be there today or tomorrow. And when the person shows up, they’re background-checked, uniformed, and certified on the main brands this part of Orlando runs on: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Our Gate Repair Services in Conway
Electric Gate Repair
Conway’s storm season sends power surges into gate operator boards every summer. We replace circuit boards, safety photocells, loop detectors, and transformer wiring on the common opener brands found in 32812. Before a Lincoln-branded surge or a flood-damaged transformer gets replaced, we check the whole circuit so you’re not buying the same repair twice. And we do it in Conway, not from a phone center.
Automatic Gate Repair
When an automatic gate stops mid-cycle on a lakefront property, it’s usually one of three things: a lightning-struck control board, a contactor that’s arced, or a load sensor that’s misreading the gate weight. Older operators from the 1990s and early 2000s are common on the ranch homes south of Lake Como Road and east of Anderson. We repair and reprogram what’s still worth keeping, and we’ll tell you straight when a newer Viking or BFT board is a better long-term spend than patching a 25-year-old board every third storm.
Hinge & Post Repair
This is the repair we do more than any other in Conway. The original 1960s-1980s posts on this housing stock were installed in sand and then the lakefront irrigation and heavy summer saturation did the rest. A hinge post heels toward the water. The gate sags. You can shim the hinge, shave the latch, adjust the arm, and it’ll be back in six months. We resleeve, replace, or re-set the post in deeper concrete with stainless hardware. This is the difference between a repair that lasts one dry season and one that lasts.
Gate Realignment
A gate that scrapes the driveway, won’t latch, or sits visibly out of level on a Conway lot is a geometry problem. The panel is usually square. The posts are not. We square the posts against the actual drive plane, not one against the other, then realign the panel and the opener travel so the whole thing sits dead level. On the narrow lakefront driveways off Anderson and Lake Conway Drive, where the gate clears the ground by six inches on a good day, realignment is the difference between a gate that opens and one that digs a trench in the paver driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conway
We’re certified to service nine major gate brands, and the ones we see most often on Conway driveways are FAAC, BFT, Linear, and Viking. We stock common boards, sensors, and hardware for these brands so you’re not waiting on a three-week drop-ship. For older or orphaned operators, we can frequently cross-reference to a current equivalent and retrofit it in the field. Hal keeps a bench stock of the parts these Conway estates repeatedly need: stainless hinge bushings, surge-rated transformers, and post-anchor kits for sandy, saturated footing repairs.
Common Gate Repair Problems We See in Conway Homes
- Water-tilted gate posts. Along the Conway chain of lakes, gate posts often lean toward the water because saturated soil undercuts one side of the concrete footer. We fix this by drilling and setting new anchors or re-pouring the footer deeper, then realigning the panel. A hinge shim won’t fix a post that’s moving.
- Lightning-fried opener boards. June through September, afternoon storms hit Conway hard. Safety photocell modules, loop detector boards, and the main control board all take hits. We see this pattern every summer and keep spare boards on the truck for FAAC and LiftMaster units.
- Corroded underground wiring and rack hardware. The humid microclimate near Lake Conway and Lake Barton speeds up oxidation on buried wire and slide gate track components. A slide gate that jams after rain usually has corrosion in the underground conduit or the rack and pinion. We trace it, not just lube it.
- Sagging ornamental iron on original 1960s-1980s hinges. Many Conway ranches still have their original wrought iron swing gates. The steel is often fine. The hinge pins, bushings, and post brackets are done. We replace the hardware and weld on site so the gate stays in your driveway.
Pricing for Gate Repair in Conway, FL
You should know what to expect before anyone touches your gate. In Conway, a basic hinge and bushing replacement on a standard swing gate runs $220-$380. A full post reset, including breaking out the old footer and re-pouring a deeper one, runs $450-$850 depending on access and whether the existing post is steel or hollow wrought iron. Control board replacement on a FAAC or Viking operator runs $380-$720 parts and labor. Full gate realignment typically lands between $280 and $520. The price is quoted and agreed before any work starts, in writing. No surprises at the door. We also offer $40 off any repair over $200, no trip charge inside Orange County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Conway
If you’re just outside Conway, we’re already there most weeks. We serve Gate Repair in Conway and the surrounding area, including Orlando, Azalea Park, Belle Isle, and Pine Castle. Same crew, same truck stock, same 90-Day Done Right Promise.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Conway
Yes, a tilting post can almost always be fixed without replacing the gate. The post heels toward the water because moisture-saturated soil erodes or softens the concrete footer on the lake side, allowing the post to lean. We break out the compromised concrete, re-pour a deeper and wider footer with stainless anchors, set the post level, and then re-align the gate panel to the new post line. The original gate panel is usually perfectly reusable.
We treat iron gates with a rust-inhibiting primer and marine-grade paint system, then replace any exposed mild-steel hardware with stainless. At the weld joints and the bases of the pickets, where lake humidity sits for eight months of the year, we apply an anti-corrosion sealant. For lakefront properties off Lake Conway Drive and Little Lake Conway, this is not a cosmetic upgrade; it’s the only thing that keeps a gate from rusting through in a decade.
With the right surge protection, yes. Conway gets more lightning days than most of Orange County, and a direct strike on a gate opener control board usually means board replacement, not field repair. We install whole-opener surge suppressors rated for direct lightning exposure, and we route sensor wiring with proper grounding so a close strike doesn’t jump into the low-voltage circuit. That’s a Conway-specific necessity, not an upsell.
First, check the track. If it’s full of sand and debris, clear it. If the gate still binds, the problem is usually water inside the underground conduit or corroded rack hardware. We see this steadily around Lake Barton and the low-lying lots south of Lake Conway Drive. The fix is tracing the low-voltage wiring run, replacing corroded splice points, and sealing the conduit. A jammed slide gate that gets forced can damage the drive motor, so if it’s still binding after clearing the track, call (877) 610-2993.
Yes. Florida adopted UL 325 entrapment standards, and any automatic gate we service gets brought into compliance. That means working safety photocells, contact edges, and proper force settings. On the older 1960s-1980s ranch homes south of Lake Como Road, we often find the original safety edge is cracked or the photocell has been painted over. Those are replaced during repair. It’s part of doing the job right, not a separate charge.
If your gate isn’t working right in Conway, call us. Hal picks up the phone, and if he’s got a truck in the area, he’ll be there. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 for a free estimate, or to get a second opinion on any written quote you’ve been handed.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conway since 2001.