Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Conway
Gate parts and welding in Conway, FL typically runs $180 to $1,400 depending on whether we’re replacing a hinge, rebuilding a post footing, or welding new steel into an old ornamental iron gate. Most repairs are done in one visit, often the same day you call. If your gate is sagging near Lake Conway or the panel dragged through the last storm, call (877) 610-2993 and Hal will tell you straight what it needs. We’ve been fixing gates in Conway since long before the national franchises started rubber-stamping replacements, and we do the work in your driveway, not in some warehouse across town.
Why Gatewood Fence & Gate Is Conway’s Preferred Gate Parts & Welding Company
Conway homeowners call us because we show up with a welder on the truck and a name you can look up. Hal Gatewood has been owner-operated since 2001, and his shop’s address is published right alongside the license number. That matters in a neighborhood like Conway, where a lot of the lakefront houses still have original 1960s and 1970s gates that need a craftsman, not a replacement quote.
We answer the phone with a live person 24/7. Not a voicemail. Not an automated menu. When a storm comes through off the Conway chain of lakes in July and your gate motor is dead, you get Hal or one of his crew on the line, and a real person in Conway shortly after. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround.
Our Gate Parts & Welding work in Conway covers everything from a single rusted hinge post to full-post replacement and custom steel fabrication. We don’t haul your gate off to a shop. We weld on site, fix the cause of the sag, and leave the gate swinging true.
Our Gate Parts & Welding Services in Conway
Hinge Replacement
On the lakefront streets off Lake Conway Drive and around Lake Barton, hinge posts bear the brunt of Central Florida humidity. We replace rusted-out hinge barrels, weld new hinge plates onto existing posts when the steel is still sound, and use stainless hardware so you’re not back in the same spot three years from now. A typical hinge replacement on a double swing gate in Conway runs $220 to $480.
Post Replacement
This is the repair Conway genuinely needs more than any other. The sandy, moisture-saturated soils near the lakes heave and shift, and the concrete footers poured for gates back in the 1960s and 1970s were rarely deep enough for what the ground does here. When a hinge post tilts toward the water, replacing just the panel won’t hold. We set new steel posts in proper concrete footers with a collar, and we weld the gate back to a post that’s actually standing in the ground. Post replacement in Conway typically runs $400 to $1,100 depending on post size and how much digging the soil demands.
Rail Repair
Gate rails crack. It happens slowly, usually at the weld points, and then one afternoon the gate starts dragging. We cut out the rusted or cracked rail section and weld in new steel matched to the original profile. For Conway’s older ornamental iron gates, that often means matching the scrollwork and picket spacing so the repair doesn’t scream at you from the curb. Rail repair work usually runs $150 to $400 per section.
Custom Welding
When a gate is custom, the fix has to be custom. We fabricate replacement pickets, rebuild arched top rails, weld closed mangled sections, and reinforce gates that have rattled loose at the corners. We also do custom work Conway homeowners ask for: widening a gate opening, adding a pedestrian pass-through, or modifying an iron gate to accept a new operator. Custom welding jobs in Conway start around $250 and go up from there based on steel and time. We quote it before the welder ever fires up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conway
We’re certified to work on nine major gate operator brands, and around Conway we see a lot of Linear, Viking, Ghost Controls, and DoorKing units on lakefront properties. We stock common boards, sensors, and remotes for these brands, which means faster turnaround when a storm knocks a gate control out. If your operator is a brand we don’t routinely stock parts for, we’ll tell you on the phone before we schedule the trip.
Common Gate Parts & Welding Problems We See in Conway Homes
- Hinge posts tilting toward the lake. On Conway’s lakefront streets, saturated sandy soil undermines the water-side of the concrete footer. The post leans, the gate sags, and eventually the hinges bind or snap. This is a soil problem first and a welding problem second.
- Rusted hinge posts shearing under wind load. Years of humid microclimate corrosion eats the base of the post where it meets the concrete. A strong afternoon thunderstorm gust will finish what the rust started. We see it constantly off Lake Conway Drive.
- Lightning strikes frying gate operator boards. Conway sits in the path of Central Florida’s June through September storm season. A nearby strike sends a surge through the underground wiring, and the board or safety photocells go dead. The gate won’t move, and sometimes it’s stuck half open.
- Post footings heaved out of alignment from saturated soil. The low-lying lots around the Conway chain of lakes stay wetter longer after heavy rain. Footings shift, gates drag, and one day the gate post is visibly off plumb. That’s a rebuild, not a patch job.
Pricing for Gate Parts & Welding in Conway, FL
Here’s what Conway homeowners should expect to pay. Hinge replacement runs $220 to $480. Post replacement runs $400 to $1,100. Rail repair runs $150 to $400 per section. Custom welding starts around $250 and goes up based on steel and labor. A full gate rebuild typically lands between $600 and $1,400. The price is quoted and agreed before any work starts, so the number Hal gives you on the phone is the number on the invoice. We honor a $40 discount on any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve got from another company. Seniors and veterans always get 10% off.
We Also Serve Cities Near Conway
Beyond Conway, we handle Gate Parts & Welding calls in Orlando, Azalea Park, Belle Isle, and Pine Castle. The lakefront soil problems don’t stop at the Conway line, and neither do we. If you’re in one of the neighboring communities and your gate is sagging or your post is leaning, call (877) 610-2993.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Conway
Because the sandy soil on the water-side of your driveway stays saturated longer than the inland side, and it slowly settles and erodes under the concrete footer. The post leans toward the lake, the gate sags, and eventually the hinges fail. The fix is resetting the post in a deeper footer with a concrete collar, then welding the gate back square. Call (877) 610-2993 if your post is leaning, and we’ll come take a look.
Only if the hinge post is still solid and plumb. If the post is tilted, rusted at the base, or shifted in its footing, welding a new panel onto it just puts fresh steel on a bad foundation. It’ll sag again. We always check the post first, because on Conway’s lakefront lots, the post is usually the actual problem. A free estimate will tell you which repair you actually need.
Most automatic gate operators have a manual release mechanism, typically a keyed release or a pull lever on the operator housing. It disengages the drive so you can swing or slide the gate by hand. If you’re not sure where yours is, call us and we’ll walk you through it over the phone. One caution: if the gate is heavy and the hinges are already worn, don’t force it. A broken hinge under a heavy gate can send the panel down hard. Call (877) 610-2993 and we’ll send someone out.
Lightning surges travel through the low-voltage wiring and fry the photo-eye sensors or their alignment circuit. Sometimes the eyes just get knocked out of alignment by the gate shifting on saturated ground after the rain. We replace faulting sensors and check the wiring and post alignment at the same time, because in Conway the two problems usually show up together. The fix runs $120 to $260 in most cases.
Yes. The constant moisture around the Conway chain of lakes accelerates rust on uncoated steel hinges, rails, and posts, and even aluminum frames oxidize at the weld points. Hardware that would last twenty years in a dry climate often gives up in ten or twelve here. That’s why we use stainless hardware and anti-corrosion coatings on lakefront gates. It costs a little more up front and saves a post replacement later. Call (877) 610-2993 for an exact quote on your gate.
What Makes Conway’s Lakefront Soil Different
This is the thing most gate companies don’t tell you, because it means more work. On Conway’s lakefront streets off Lake Conway Drive, gate posts commonly tilt toward the water because moisture-saturated soils undermine the concrete footer on the water-side of the driveway. This failure mode is rare even a mile inland toward the 408, where the lots sit higher and drain faster. If your gate post is leaning toward the lake, the panel isn’t the problem. The ground under the post is.
We recently rebuilt a swing gate on a 1970s ranch off Lake Barton Drive where the hinge post had tilted 5 degrees toward the lake after heavy June storms saturated the sandy soil. Our crew pulled the original 4×4 steel post, poured a 12-inch diameter concrete footing with a concrete collar, and welded the ornamental iron panels back to the corrected hinge post using stainless hardware. The gate now swings true with no sag. That’s the difference between fixing the symptom and fixing the cause, and it’s the only way we work.
Humidity along the shoreline does the rest of the damage. It corrodes the base of the hinge post where it enters the concrete, and then a wind gust from a summer storm shears it clean. The post snaps. The gate drops. Now you’ve got a panel on the ground and a post stub to dig out. That’s a post replacement and a hinge rebuild, not a quick weld. We see it every storm season in the 32812 zip code.
Central Florida’s afternoon thunderstorm season runs June through September, and Conway’s lakefront lots sit low. Lightning strikes nearby fry gate operator boards and safety photocells through the underground wiring. Seasonal flooding can submerge gate track hardware and corrode the conduit. If your gate is dead after a storm, the operator may be fine but the low-voltage wiring and sensors took the hit. We diagnose it properly instead of selling you a new board you don’t need.
For gate parts and welding in Conway, the right repair starts with understanding the land the gate sits on. That’s local knowledge you only get from someone who’s been pulling posts out of Conway soil for years, and Hal Gatewood has been at it since 2001. Call (877) 610-2993 for a free estimate. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conway since 2001.