Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Broomfield
Most gate repairs in Broomfield take one to three hours once we’re on site, and we can usually get a crew to your driveway the same day you call. If your gate is stuck open, sagging, or making a sound like a garbage disposal full of gravel, call us at (877) 610-2993 and a live person answers. Not a voicemail. Not a phone tree. Hal Gatewood’s crew works Broomfield’s HOA communities every week, so we know which gates fail and why they fail here.
Broomfield’s neighborhoods weren’t built gradually over a century. They went up fast, in a tight window between 1995 and 2015, and nearly every one of those communities got an automated ornamental-iron gate spec’d by a production builder to minimum cost. A lot of those gates are now 15 to 25 years old. They’re tired. We fix them in place, on site, with welding equipment in the truck so your gate never leaves your driveway.
Why Gatewood Fence & Gate Is Broomfield’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and his name is on every invoice. That matters in Broomfield because people here still check. You can drive to the shop, look him in the eye, and ask why a gate sags in the hinge post and not in the middle. He’ll tell you. Then he’ll fix it.
We answer calls around the clock with a live person. Your call doesn’t get routed to a dispatch queue or a call center three states away. You get a real human who knows gates, knows Broomfield, and can tell you whether the problem sounds like a hinge, an operator, or a control board. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print, no hedging.
We’re licensed, insured, and background-checked on every job. We service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And we show up in the window we said we would.
Our Gate Repair Services in Broomfield
Electric Gate Repair
Electric gate repair in Broomfield is our most common call, and for a reason specific to this city. The master-planned build-out between 1995 and 2015 put hundreds of automated entry gates on the same aging curve. When an operator from that era fails, it’s usually the control board, the capacitor, or the limit switches. We carry replacement boards and capacitors in the truck for most Broomfield-era operators, so the repair is usually done on the first visit.
We repair the gate in your driveway. We don’t haul it to a shop and call you in two weeks. Most electric gate repairs run $180 to $480 depending on whether it’s a board, a motor, or both.
Automatic Gate Repair
Automatic gate repair in Broomfield means diagnosing the whole system, not just the part that’s making noise. A gate that won’t open can be the operator, the loop detector, the keypad, or a bad splice in the underground wire. Builder-minimum loop detectors in Broomfield’s HOA communities fail on the same cycle as the operators, which is why a gate will suddenly ignore the keypad or reverse erratically. We test the full circuit before we quote a repair, so you don’t pay for a new operator when the problem is a $40 loop detector.
We work on FAAC, BFT, Linear, Viking, LiftMaster, and anything else you’ve got. If it moves, we can make it move right.
Hinge & Post Repair
Here’s a truth most gate companies won’t tell you: a gate sags in the hinge post, not in the middle. Fix the panel without the post and you’ll fix it twice. In Broomfield’s older Broadlands-area homes, the iron gates were installed with hinge posts and hinge welds that were never meant to carry the wind load that comes down off the foothills. A Chinook gust at 65 miles an hour puts force on the hinge post that the original installer never accounted for.
We cut out the worn hinge, weld in new material on site, and reset the post so the gate hangs true again. Hinge and post repair in Broomfield typically runs $250 to $650 depending on post condition and whether we need to pour a new footing.
Gate Realignment
If your gate drags on the ground or the latch no longer lines up, don’t ignore it. A gate that drags puts steady stress on the operator, and the operator will fail before its time. Gate realignment in Broomfield is usually a matter of adjusting the hinges, shimming the post, or straightening the gate frame. Sometimes the issue is a shifted concrete footing caused by freeze-thaw cycles, which Broomfield gets every spring and fall.
We realign the gate, check the operator’s torque settings, and test it through a full open-close cycle before we leave. Realignment typically costs $150 to $350.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broomfield
If your gate says FAAC, BFT, Linear, or Viking on the cover, we can service it. We’re certified on nine major brands and we keep common Broomfield failure parts in the truck: control boards, capacitors, hinge pins, and safety photocells. That means when we diagnose your gate, we usually fix it the same visit instead of ordering a part and coming back next week. Older operators are often still repairable when the right person opens them up. Hal has been doing that since 2001.
Common Gate Repair Problems We See in Broomfield Homes
- Chinook wind damage on west-facing gates. Broadlands and Anthem community entrances face the foothills and catch the full force of downdraft winds that regularly top 60 to 70 mph. Undersized 1990s swing-arm operators burn out under that load, and bent gate arms are a routine sight after a big blow. The fix that sticks is a replacement operator spec’d at least one torque class higher than the builder’s original.
- UV-chalked powder-coat finishes. Broomfield sits at about 5,400 feet, where UV is measurably higher than Denver proper. Powder-coat on iron gates chalks and cracks faster here than residents expect. Once the coating is compromised, rust starts on the iron underneath, and the hinge posts are usually the first to corrode.
- Synchronized HOA gate failures. Because hundreds of Broomfield’s community gates were installed in the same 1995-2015 window, their control boards, loop detectors, and operators are aging out together. You’re not imagining that every HOA entrance on the north side seems to be down at once. It’s the lifecycle wave.
- Obsolete safety features. Many gates installed before 2000 went in without photocell safety eyes, reversing edges, or current entrapment protection. When we repair any Broomfield gate, we check whether it meets current safety requirements and we’ll tell you straight if it doesn’t.
Pricing for Gate Repair in Broomfield, CO
You should know the number before we start turning wrenches. Every quote is agreed up front, in writing, before any work begins. No trip charge inside Broomfield. No surprise line items at the door.
Here’s what Broomfield residents typically pay:
- Hinge and post repair: $250-$650
- Gate realignment: $150-$350
- Control board replacement: $180-$480
- Operator replacement (including labor): $700-$1,400
- Weld and rust repair: $150-$500
- Loop detector replacement: $150-$400
We offer $40 off any repair over $200, a free second opinion on any written estimate you’ve received, and a permanent 10% discount for seniors and veterans. Broomfield’s HOA communities often qualify for our no-trip-charge guarantee, which means if you’re in 80020, 80021, 80023, or 80038, the diagnosis doesn’t cost you anything.
We Also Serve Cities Near Broomfield
From our shop in the metro area, we run crews daily into Superior, Louisville, Lafayette, and Westminster. If you live in one of those communities, you’ll get the same owner-operated Gate Repair team and the same 90-Day Done Right Promise. But this page is about Gate Repair in Broomfield, and Broomfield is where most of our older-gate work happens. Call us and see if we’re already up the road from you.
Serving Broomfield, CO - Our Local Coverage Area
We’re based in the Broomfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Broomfield
Broomfield’s HOA gates are failing at the same time because nearly all of them were installed during the city’s 1995-2015 master-planned build-out, which means hundreds of near-identical gate systems are now hitting their 15-25 year service life simultaneously. This synchronized aging curve doesn’t exist to the same degree in Westminster or Superior, where construction was spread out over decades. When your HOA gate goes down the same week as the one two streets over, it’s not a coincidence. It’s the lifecycle wave. Call (877) 610-2993 for a free diagnosis of your community’s gate system.
No, you usually need a new hinge post, not a new panel. In Broadlands, the original iron gates were hung on hinge posts that were undersized for the wind load coming off the foothills. The weld fails, the post leans, and the gate sags. We cut out the worn material, weld new hinge stock on site, and reset the post. You’ll spend a few hundred dollars instead of a few thousand. Call (877) 610-2993 and we’ll tell you honestly whether the panel is still good.
Most gates installed before 2000 in Broomfield do not meet current safety requirements. They went in without photocell safety eyes, reversing edges, or modern entrapment protection. When we repair any older gate, we’ll check it against current code and give you a straight answer on what’s missing. Retrofitting safety edges and photocells is usually far cheaper than a full replacement. Call (877) 610-2993 to schedule a safety check.
Your gate operator burned out during the windstorm because it was probably undersized for the wind load when it was installed. Broomfield’s west-facing gates in Broadlands and Anthem catch Chinook downdrafts funneling off the foothills, and original builder-spec swing-arm operators from the 1990s weren’t spec’d for sustained 60 to 70 mph gusts. The fix that sticks is a replacement operator one torque class higher. Last spring our crew replaced an original 1998 swing gate operator at a Broadlands community entrance after a 70 mph Chinook bent the gate arm and smoked the control board. We installed a LiftMaster unit one torque class up, replaced the worn hinge post, and added a safety photocell pair that the original install never had. That HOA hasn’t had a wind-related callback since.
It depends on the board, but in Broomfield, many 20-year-old control boards can be repaired or replaced with a direct-fit aftermarket unit for $180 to $480. Some older boards suffer from capacitor failure, which is a straightforward solder repair. Others have corroded traces from moisture and should be replaced. We’ll tell you which one you have, and we won’t sell you a new operator if the board is all that’s wrong. Call (877) 610-2993 for an honest diagnosis.
Call Gatewood Fence & Gate for Gate Repair in Broomfield
If your gate is down, sagging, or acting up, call us at (877) 610-2993. A live person answers. We’ll talk through what you’re seeing, give you an honest idea of what it’ll cost, and set a window we’ll actually keep. The price is agreed before any work starts. The 90-Day Done Right Promise is in writing. And the name on the shop is the name on the invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broomfield with owner-operated gate repair since 2001.