Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Broomfield
If your Broomfield gate motor has stopped lifting, grinding, or reversing on its own, we can usually get someone out the same day. We’re Gatewood Fence & Gate, and we’ve kept our shop small and accountable on purpose since 2001. A live person answers our phone at (877) 610-2993 every hour of the day. Not a menu. Not a robot. The same owner, Hal Gatewood, who signs the invoices is the one backing the 90-Day Done Right Promise on every repair we do in this part of the Front Range.
Broomfield is a unique market. The master-planned HOA communities that grew fast between 1995 and 2015 now own gate systems all hitting their 15 to 25 year replacement cycle at once. We see it in Broadlands, Anthem, Miramonte, and the newer 80023 neighborhoods like Palisade Park. When a gate motor fails in Broomfield, it rarely fails alone. We know what to look for before the next failure happens.
Why Gatewood Fence & Gate Is Broomfield’s Preferred Gate Motor & Opener Company
Our name is on the shop and on every invoice Hal Gatewood writes. That’s the oldest accountability there is, and it matters to Broomfield homeowners who have already been quoted one price on the phone and charged another at the door. We quote upfront and in writing before any work starts, and the number we give you is the number you pay. No trip charge inside the county, and a standing $40 off any repair over $200.
The communities here run on HOA schedules, strict architectural guidelines, and shared entry systems. Our crew knows the difference between a private driveway gate in Palisade Park and a community entrance gate in Broadlands that the management company oversees. That local knowledge means we show up ready, not reading a manual. We’ve certified on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock the parts that fail most often out here.
Our Gate Motor & Opener Services in Broomfield
We don’t swap parts that don’t need swapping. Our gate motor and opener work in Broomfield is repair-first. If we can fix the motor in your driveway, we will. If a builder-grade unit has been burned out by one too many Chinook wind events, we’ll tell you honestly why a replacement is the only real fix and then spec the right size.
Motor Installation
Putting in the wrong torque class on a Broomfield gate is a fast way to repeat service calls every spring. We measure the panel, check the wind exposure, and pick an operator that actually fits the load instead of whatever the original installer grabbed in 2004. That’s why we commonly spec FAAC and BFT units for Broadlands and Anthem community gates that face west. Gate Motor & Opener work starts with a free site visit and a written price.
Motor Repair
Most motor repair calls in Broomfield come down to three things: fried control boards, stripped gears, or capacitor failure from frequent wind-driven cycling. We diagnose on site, usually within the hour. If your operator is tripping its breaker or humming but not moving, call us. We’ll tell you over the phone what to check safely.
Linear Motor
Linear gate motors, sometimes called piston or arm actuators, take a beating in Broomfield because they sit directly in the wind path on swing gates. Years of gust loading bends rods, leaks seals, and cooks the internal limit switches. We repair them when it makes sense, and when it doesn’t, we don’t sugarcoat it. You’ll get a straight answer and a price before anything gets unbolted.
Slide Motor
Slide gates are common on Broomfield’s newer subdivisions and on commercial and HOA perimeters. They fail slowly at first: grinding gears, a panel that jumps the track, a motor that runs but doesn’t move the gate. Catch it early and it’s usually a gear rack adjustment or a wheel bearing. Let it ride and you’re buying a new motor. We cover all of Broomfield; slide gate diagnostics are the same price as everything else, with the free second opinion on any written estimate in hand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broomfield
Our techs are factory-familiar on nine major lines, but in Broomfield we see a lot of FAAC, BFT, Linear, and Viking on community entrances. Those four brands account for the bulk of our HOA work here simply because they were the ones area builders and gate contractors spec’d during Broomfield’s big build-out. We stock their most common boards, gears, and safety parts locally, so a Broadlands swing gate isn’t down for a week waiting for a part that has to ship from California. That’s the practical difference a local shop makes.
Common Gate Motor & Opener Problems We See in Broomfield Homes
- Wind-load overloads. Broadlands and Anthem gates facing west and northwest take the full brunt of Chinook downdrafts, and the original builder-grade motors were never sized for 60 to 70 mph gusts. We see burned-out transformers, sheared pins, and bent swing arms after nearly every big wind event.
- Hinge post fatigue. A gate sags in the hinge post, not in the middle. On Broomfield’s iron driveway gates, years of wind-driven motion work the post loose until the actuator binds and the motor cooks itself trying to move a panel that’s no longer square.
- Failed safety loops and sensors. Shared HOA entry systems in this city depend on vehicle loops and photocells that age badly at 5,400 feet of UV exposure. A false reverse or a gate that won’t close is usually a bad loop detector, not a motor problem.
- UV-cracked finishes and brittle housings. Broomfield’s elevation means the sun works harder on powder-coat and plastic. We often find motor housings and arm covers that have gone chalky and cracked within ten to twelve years, letting moisture into the gearbox.
Pricing for Gate Motor & Opener in Broomfield, CO
Here’s what we actually see in Broomfield, not what a national chain might quote from a call center three states away. A basic control board replacement runs $260 to $480. Repairing a swing gate motor with new gears and a capacitor typically lands between $340 and $620. A full gate motor and operator replacement in Broomfield, where we’re often upgrading an undersized builder unit, ranges from $1,400 for a simple private driveway slide gate to $2,800 to $4,200 for a shared HOA entrance with battery backup and updated safety edges. If you’re in a community with intercom integration, plan for an additional $500 to $1,000 for the wiring and panel tie-in. We quote in person, in writing, before a single screw comes out. Senior and veterans get 10% off, every time.
We Also Serve Cities Near Broomfield
Our crews work the whole north metro, not just Broomfield. Callers in Superior, Louisville, Lafayette, and Westminster get the same owner-operated service and the same no-trip-charge deal inside the county. You can see more about how we run our whole service area at Gate Motor & Opener in Broomfield, or just pick up the phone.
Serving Broomfield, CO - Our Local Coverage Area
We’re based in the Broomfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Broomfield
Yes, in most of Broomfield’s master-planned communities you need to submit a modification request before changing the gate’s appearance or footprint, even for a motor swap that keeps the same panel. The approval process usually covers the operator, any new mounting posts, and safety equipment like photo eyes. If the motor is a straight like-for-like replacement, many management companies will approve it quickly, but never assume. We’ve done enough Anthem and Broadlands jobs to know which forms your particular community expects, and we’ll coordinate with the management company directly if that helps. Call (877) 610-2993 and we’ll walk through your specific HOA’s rules with you.
Because the builder specified a motor that wasn’t big enough for the actual wind load at your gate’s location, and now the actuator, the gearbox, or both are being worked past their limits every time a Chinook rolls down from the foothills. West-facing community entrances in Broadlands and Anthem sit right in the downdraft path, and we routinely find the original 1990s and 2000s operators were a full torque class too small for the job. The fix isn’t another cheap swap; it’s a properly spec’d replacement, often a FAAC or BFT unit one class higher than what was there before. We’ll measure the gate and the wind exposure and set it up so the operator stops fighting wind it was never built to handle.
Yes. Battery backup systems are a standard add-on for shared entry gates in Broomfield, and we install them on about a third of the community gates we service. A battery backup keeps the operator running for a set number of cycles after the power drops, which matters when an outage hits at rush hour and two hundred cars are waiting on Sheridan Parkway. We size the battery bank to the gate’s actual cycle count, not a guess, and we test it under load before we leave. Call us and we’ll give you a written price for the whole system.
Start with your community’s management company. In Broomfield, most HOA entry gates are common-area assets, so the board or the property manager approves the work and owns the invoice. We work with dozens of area management companies and know the paperwork they need: a written diagnosis, a spec sheet for the replacement operator, and a scope that covers the safety upgrade to current UL 325 standards. We’ll hand you or your manager a complete quote and a work schedule, and we’ll do the job on the schedule the community approves.
Any gate operator we install or significantly modify in Broomfield must comply with UL 325, the federal standard that governs entrapment protection. In practice that means photo eyes or contact edges on both sides of the gate, a reversing mechanism that stops and reverses when the gate meets resistance, and a manual release that lets anyone open the gate by hand in an emergency. We don’t do a motor swap without bringing the safety devices up to that standard. It’s not an add-on line item we skip when the budget tightens; it’s part of the job.
Gate motor problems don’t fix themselves, and in Broomfield they often hit whole neighborhoods at once. When you need a straight answer, call Gatewood Fence & Gate at (877) 610-2993. A real person answers. You’ll get an honest assessment, a written price before any work starts, and a 90-Day Done Right Promise stamped on the invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broomfield since the day we opened.