Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Broomfield
Gate parts and welding in Broomfield usually means one of three things: a hinge post that has leaned out of plumb, a weld that finally let go after years of Chinook winds, or an operator that gave up because it was undersized from the day the builder put it in. We fix all three, on site, in your driveway or at your HOA entrance on the US-36 corridor. Hal Gatewood has been doing exactly this since 2001, and our Gate Parts & Welding crew covers every Broomfield zip code from 80020 up through 80038. If your gate is sagging, screeching, or dead, call (877) 610-2993 and a live person picks up. Not a voicemail tree.
Why Gatewood Fence & Gate Is Broomfield’s Preferred Gate Parts & Welding Company
Most of the gate work we do in Broomfield starts with somebody else’s repair. A handyman welds a cracked hinge without addressing the post. A national outfit swaps the operator and never asks why the old one burned out. We drive out, look at the whole gate, and start with whatever actually failed. Fix the panel without the post and you’ll fix it twice.
We’re locally owned and owner-operated. Hal’s name is on the shop, the address is published, and the license number is there for anyone to look up. That matters to the homeowners we work for in Broomfield who have been burned by a phone quote that changed at the door. Our price is quoted and agreed before any work starts. Every job carries the 90-Day Done Right Promise in writing. One call brings us back, no runaround.
We also carry standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You won’t have to ask twice.
Our Gate Parts & Welding Services in Broomfield
Hinge Replacement
Broomfield’s clay soils shift with moisture and freeze-thaw cycles, and hinge posts poured shallow by production builders start leaning within a decade. A gate sags in the hinge post, not in the middle, and that’s where we start. We cut out the old hinge, true up the post if it’s still sound, and weld in a heavier hinge with full penetration. If the post is the problem, we address that before re-hanging. Most hinge replacements in Broomfield run $180-$340 per hinge depending on gate weight and post condition.
Post Replacement
This is the job we do most often in Broadlands and Anthem, where west-facing community entrances take the brunt of Chinook downdrafts funneling off the foothills. Original builder-spec posts have shallow footings and fatigue cracks from years of 60-70 mph gusts. We dig out the old post, set a new steel post with deeper concrete, and weld the gate back on square. A typical post replacement in Broomfield runs $450-$900, including concrete and cleanup. Doing it right means the gate doesn’t sag again in three years.
Rail Repair
Rails crack where they’re welded to pickets, especially on ornamental-iron gates from the 1995-2015 construction wave around Broomfield. The UV at 5,400 feet chalks powder coat faster than people expect, and once moisture gets under the finish, the steel follows. We grind out the crack, weld the rail solid, and re-coat the area so it doesn’t rust out next winter. Rail repair typically runs $150-$300 per section in Broomfield.
Custom Welding
Not every fix is a replacement part. We regularly weld brackets for solar gate openers on Palisade Park gates, fabricate extension plates for misaligned operators, and build custom hinge cradles for gates the original installer never thought through. On-site welding means your gate stays in your driveway. We don’t haul it to a shop three towns over. Custom welding in Broomfield runs $95-$150 per hour plus materials, and you’ll know the number before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broomfield
We’re certified to service nine major gate brands, and the three we see most often on Broomfield HOA entrances and private driveway gates are LiftMaster, FAAC, and Linear. BFT and Viking show up regularly on older Anthem communities. We keep common boards, arms, and remotes in the truck so a service call to 80021 or 80023 usually means one visit, not two. If we don’t have the part on hand, we can get it fast, and we’ll tell you honestly before you pay anything.
Common Gate Parts & Welding Problems We See in Broomfield Homes
- Undersized swing operators on west-facing gates. The original builder-spec Viking and BFT units on Broadlands entrances were never sized for Chinook wind loads. Gears strip and motors burn out in the first big blow. The fix that lasts is upsizing one torque class, usually to a LiftMaster, rather than replacing like for like.
- Shallow post footings in clay soil. Broomfield’s expansive clay moves with every freeze-thaw cycle. Production builders poured footings to minimum code, and hinge posts start leaning within eight to twelve years. A welded gate can’t fix a moving post; the post has to be set deeper and squared.
- Powder coat failing faster than expected. At roughly 5,400 feet, Broomfield’s UV index is measurably higher than Denver proper. That means chalking and cracking show up years earlier than the manufacturer’s warranty assumes. Once the finish cracks, moisture gets in and the steel rusts from the inside out.
- Missing or undersized conduit in newer builds. Palisade Park and parts of 80023 went in fast, and low-voltage conduit was often omitted entirely. Retrofitting keypad entry or a solar opener means surface-mounted runs, and those runs still break under freeze-thaw if they’re not anchored right. We see it constantly.
Pricing for Gate Parts & Welding in Broomfield, CO
These are the numbers we actually quote for Broomfield work. Hinge replacement: $180-$340 per hinge. Post replacement: $450-$900, including concrete. Rail repair: $150-$300 per section. Custom welding: $95-$150 per hour plus materials. Operator replacement, when the old one is beyond saving, starts around $650 and goes up depending on gate length and access control features.
What moves the number is gate weight, post condition, and whether the gate is an HOA entrance or a private driveway. Before any work starts, we walk the gate with you, explain what failed and why, and quote a fixed price. No trip charge inside Broomfield. No surprise invoice at the end. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Broomfield
We work all along the US-36 corridor and into the neighboring communities. The same crew that handles gate parts and welding in Broomfield also serves Superior, Louisville, Lafayette, and Westminster. If you’re just over the line in any of those cities, the phone number is the same: (877) 610-2993.
Serving Broomfield, CO - Our Local Coverage Area
We’re based in the Broomfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Broomfield
Broadlands entrances sit squarely in the path of Chinook downdrafts that funnel off the foothills and hit the US-36 corridor at 60-70 mph. Anthem’s gates are oriented differently and get less direct wind loading. The constant cyclical stress on west-facing Broadlands posts causes fatigue cracks at the base of the hinge post, and the only lasting fix is a deeper-set post or a welded reinforcement plate. Call (877) 610-2993 and we’ll take a look before it fails outright.
A 2003-era operator that trips the breaker is usually drawing excess current because the gears are worn or the motor is failing, not because the panel is bad. At that age, replacement is almost always cheaper over two years than repeated board and gear repairs. We’ll give you a straight answer and a fixed price either way. Estimates are free.
We can, but we’ll be honest: welding always affects the finish at the weld site. We grind clean, weld the bracket, then re-coat the area with a matched finish and sealant. It won’t be invisible, but it will be protected from rust. For gates with pristine powder coat, we sometimes recommend a through-bolt bracket instead, which holds fine and leaves the finish alone. We’ll show you both options before any work starts.
Broomfield sits at roughly 5,400 feet with a UV index measurably higher than Denver proper. That extra UV exposure breaks down powder-coat resin faster than it does at lower elevation. Chalking is cosmetic at first, but once the coat cracks and moisture reaches the steel underneath, the rust cycle begins. Re-coating before that point is far cheaper than replacing rails and pickets later.
Usually it’s both, but the screech tells you the immediate issue: worn rollers or a dry, rusted track. The jerking is often the operator fighting a gate that isn’t rolling freely, which means the operator is next to go if you ignore it. We’ll inspect the rollers, track, and post alignment, then quote the parts that actually need replacing. Call (877) 610-2993 and we’ll come out.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Broomfield
You’ll talk to a live person when you call, day or night. Not a call center in another state. We’ll schedule a time that works, show up when we say we will, and give you a fixed price before any work starts. The 90-Day Done Right Promise applies to every job we do in Broomfield, from a single hinge to a full post replacement. Call (877) 610-2993 for a free estimate, or ask for Hal by name. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broomfield and the US-36 corridor since 2001.