Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Yonkers, NY
Gate repair in Yonkers typically runs $185 to $640, with most residential hinge and post jobs landing between $225 and $390. What makes Yonkers different is the terrain: steep hillside driveways put constant gravity load on openers, and the city’s heavy winter salt treatment eats through posts and hinges faster than almost anywhere else in Westchester. If your gate won’t close or a hinge has torn loose, call (877) 610-2993 and a live person answers.
Why Yonkers Homes Are Different
Yonkers gives a gate company two very different workdays. Southwest toward the Bronx border, you have dense pre-war apartment buildings and row houses with original ornamental iron gates from the 1920s through the 1950s. Those gates were forged well, but sixty-plus years of salted rainwater and tenant use have taken the hinge posts. Northeast Yonkers is hilly Westchester suburbia, where driveway gates on Park Hill and Nodine Hill fight gravity every cycle, and an opener on a 14-degree grade burns out years ahead of the same unit in flat Mount Vernon.
The salt is the other constant. Yonkers’s steep streets receive some of the heaviest municipal road-salt application in the county from November through March. Combined with moisture off the Hudson River and aggressive freeze-thaw cycling, that creates a corrosion environment that rusts out gate posts, hinges, and latch hardware noticeably faster than in flatter inland towns. We see posts in Park Hill that have rusted through at ground level in ten years, while the same post in a flat town would last twenty. The topography does something else too: an opener on a sloped driveway runs under constant load, which burns out motors and warps track alignment.
Gate Repair in Yonkers
Gate repair in Yonkers usually comes down to the motor, the control board, the safety edges, or the power supply running to the opener. On sloped driveways in Park Hill and Nodine Hill, the motor fights gravity every single cycle, and that constant load burns out capacitors and strips plastic drive gears years earlier than the same opener on flat ground in Bronxville. We carry parts for Viking, Ghost Controls, DoorKing, and Elite, so we’re not waiting on a distributor to get your gate working again. This is what our Gate Repair work covers, and the price is always quoted and agreed before any work starts.
Hinge & Post Repair
Hinge and post repair is the work we do most in Yonkers, and the reason is the salt. The city’s hillside streets see some of the heaviest municipal salt applications in Westchester from November through March, and that salt spray sits on gate posts and hinges for months. Combine that with moisture off the Hudson and the freeze-thaw cycles Yonkers gets every winter, and you have a rust environment that eats quarter-inch steel faster than most people believe. We cut out rotted post sections, weld in new steel, and re-mount the gate so it swings clean. Post repair or re-set in Yonkers typically runs $260 to $480, depending on how far the rot has traveled below grade.
Electric Gate Repair
Electric gate repair in Yonkers usually comes down to one of four things: the motor, the control board, the safety edges, or the power supply. The apartment buildings and row houses southwest toward the Bronx border, particularly in 10701 and 10702, still carry ornamental iron gates from the 1920s through the 1950s. The hinges were forged well, but decades of salted rainwater have taken the posts, and the wiring has often been patched by three different hands. We diagnose the whole circuit before we touch anything, so you’re not paying for a board when the real problem is a corroded wire. Electric opener diagnosis and minor repair runs $240 to $520 in Yonkers.
Gate Realignment
Gates in Yonkers drift out of square because the ground shifts. Steep lots mean the post footings stay wet longer, and freeze-thaw heaving works them loose a quarter inch at a time. The first sign is the gate scraping the driveway or the latch not lining up. We re-set the post if it’s loose, re-shim the hinges if it’s close, and leave the gate swinging clean. Most realignments in Yonkers run $190 to $320, depending on how far the post has moved. A gate that sags in the hinge post, not in the middle, and that is where we start.
How fast can you get to Yonkers for a gate repair?
Most Yonkers calls get same-day or next-morning service. The phone is answered live 24 hours a day, and if your gate is stuck open or wedged shut, we’ll tell you when we’ll be there before you hang up. Call (877) 610-2993.
Is gate repair in Yonkers more expensive than nearby towns?
Not at Gatewood. Our repair rates in Yonkers match what we charge in Bronxville and Mount Vernon. The work is sometimes more involved here because of salt corrosion and slope stress, but the hourly and flat-rate pricing stays the same across the county. Call (877) 610-2993 for a straight quote.
Gate Installation in Yonkers
Gate installation in Yonkers usually runs between $1,800 and $6,500 depending on the gate type, the slope of your driveway, and whether we’re automating it. Most residential installs take one to three days, and we keep pedestrian access open the entire time. Yonkers streets and driveways demand an installer who understands slopes, salt, and old ironwork, because a gate that works in flat Bronxville can fail inside two winters on a Park Hill grade. This is what our Gate Installation service handles, and every job starts with a free measure and a written price.
Sliding Gate Installation
On a steep Yonkers hillside, a sliding gate is usually the right answer because a swing gate has to fight gravity every time it opens. Sliding gates ride on a track, so the slope matters less, and they save driveway space, which is a real issue on narrow streets where there’s no room to arc a gate in or out. Sliding gate installs typically run $3,200 to $7,500 depending on the gate length and whether it’s automated. We set the track with proper fall and install an operator rated for the actual grade, not the brochure spec.
Pedestrian Gate Installation
Pedestrian gates are common on the older row-house and apartment-building stock in Nodine Hill and Park Hill, where the building sits tight to the sidewalk and there’s no room for a wide driveway entrance. These jobs often involve matching an existing ornamental iron look, which means on-site welding rather than pulling a prefab panel off a truck. Expect $900 to $2,400 for a pedestrian gate, more if the surrounding fence needs resetting. Hal welds the hinges on site, so the gate stays where it belongs and the character of the building doesn’t change.
Double Gate Installation
Double gates, the standard for wider driveways, need matched operators and a center stop system. On Yonkers hillsides, both posts have to be set below frost depth or the gate will drift out of square within two winters. Double gate installs run $4,500 to $9,000, and we quote the full number in writing before any work starts. The price you approve is the price on the invoice.
Do I need a permit to install a driveway gate in Yonkers?
In most Yonkers locations, a new driveway gate with new posts requires a building permit, and the city often reviews setbacks and right-of-way access before approving the work. We handle the permit paperwork as part of the install and quote it upfront so there’s no mystery fee at the end. Call (877) 610-2993 with your address and we’ll tell you what your property needs.
Why do sliding gates work better than swing gates on Yonkers hillside driveways?
A sliding gate rides on a horizontal track, so gravity isn’t fighting the gate every time it opens. A swing gate on a slope has to push its own weight uphill or let it pull downhill, and that constant load leans posts and burns out operators. On steep grades in Park Hill and Nodine Hill, we almost always size a sliding gate first. Call (877) 610-2993 and we’ll tell you honestly what fits your driveway.
Gate Motor & Opener in Yonkers
A gate motor repair or replacement in Yonkers usually runs between $340 and $1,900 depending on the opener style and the condition of the post and rack. Most repairs get done the same day, and we quote the full price before any work starts. The biggest mistake we see is a flat-grade motor bolted onto a driveway climbing 12 or 14 degrees, then the homeowner gets told the whole gate needs replacing. It doesn’t. We install the right operator for the actual site through our Gate Motor & Opener service, and we stand behind it with the 90-Day Done Right Promise.
Motor Repair
Most gate motor failures in Yonkers are not actually motor failures. A swing gate that sags in the hinge post pulls the operator out of alignment and trips the overload every few cycles until the circuit board gives out. A slide gate on a steep driveway fights gravity on every open, burns the capacitor, and warps the rack. We fix the underlying issue, not just the part that failed. A straightforward motor repair in Yonkers runs $340 to $680, and on-site welding means we can rebuild a hinge post or reinforce a mounting plate in your driveway instead of hauling the gate off.
Slide Motor Replacement
In dense southwest Yonkers, a slide gate is often the only option because there’s no room for a swing gate to arc out over the sidewalk. Slide motors here face two enemies: road salt spray from hillside streets and the constant pull of gravity on any slope. A full slide motor replacement on a slope in Park Hill or Nodine Hill typically runs $1,200 to $1,900, including rack alignment and safety edge integration. We install slope-rated operators and verify the rack alignment before we call it done.
Battery Backup
Yonkers loses power during winter storms the way other towns lose mail. A gate with no battery backup becomes a 400-pound locked door at the worst possible moment. We install and maintain battery backup systems on both new and existing operators, and we check the battery condition on every service call. If a storm takes the power out on your street, your gate still opens. New motor installation with backup starts around $900 and climbs based on gate weight, slope, and whether we’re running new power.
Why does my slide gate motor keep burning out on my Park Hill driveway?
Your slide gate motor keeps burning out because the driveway slope puts constant gravity load on the rack and pinion, forcing the motor to work against the hill every cycle. Flat-grade motors develop capacitor failure and board overheating quickly in those conditions. The fix is a slope-rated operator, proper rack alignment, and often new post footings. Call (877) 610-2993 for an exact quote.
Can you add a gate motor without changing my 1920s ornamental iron gate?
In most cases, yes. A 1920s iron gate is often sturdier than anything sold today, and we would rather rebuild the hinge post and weld the frame straight than replace a gate with decades of life left. The gate gets retrofitted with a modern operator sized to its weight and use. That’s our default approach in Yonkers, and it’s the repair-first philosophy we’ve built the shop on.
Gate Access Control in Yonkers
Gate access control in Yonkers means keeping the right people in and the wrong people out, whether you’re near the Bronx border in southwest Yonkers or up on a hill in Park Hill. A typical keypad or phone entry install runs $850 to $2,300 depending on wiring and how many entry points you have, and we quote that price in writing before any work starts. On older Yonkers gates, the hidden cost is usually the hinge work or post repair that has to happen before the access control can work properly. We quote all of that upfront through our Gate Access Control service, so there are no surprises at the door.
Keypad Entry
Keypad entry systems are the most common thing we install on single-family driveway gates in Yonkers, particularly in the eastern hills around Kimball Avenue and Midland Avenue. A basic wired keypad runs $350 to $650 installed, and a wireless one runs $450 to $800. If you need a keypad that survives direct exposure to road salt spray from a hillside street in 10704, we recommend a metal-housing commercial unit rather than the plastic ones that come in a big-box kit. Those plastic housings crack after two winters here.
Phone Entry
Phone entry systems call your cell or landline when someone buzzes at the gate, and you press a key to open. These are common on multi-family buildings in southwest Yonkers around Van Cortlandt Park Avenue and Riverdale Avenue, where the gate is 80 years old and the call box is original. A phone entry retrofit runs $900 to $1,800 depending on whether we can reuse the old housing or need to run a new call station. We run the line, set up call forwarding, and test it from outside the gate before we leave.
Remote Control
Remote control access is straightforward: opener, receiver, remotes. In Yonkers, the piece people forget is antenna placement on sloped properties. If your gate sits below street level or behind a stone retaining wall, the receiver needs to be mounted where the signal actually travels. We see a lot of gates in Park Hill where the previous installer buried the receiver inside the control box and the homeowner has to get out of the car and wave the remote like a magic wand. Remote control kits run $200 to $500 on top of the opener, and that’s a sloppy install we fix the first time.
How quickly can you respond to a gate access control issue in Yonkers?
We typically respond the same day for gate access control issues in Yonkers, and many jobs are completed the same day because our crew works in the city regularly. If your gate is stuck open or stuck closed and you can’t secure the property, call (877) 610-2993 and we’ll get someone out. The estimate is free, and the price is written down before any work starts.
Does your 90-Day Done Right Promise apply to access control work in Yonkers?
Yes. The 90-Day Done Right Promise covers gate access control work in Yonkers exactly the same as repair work. It’s written on every job, not buried in fine print. If something isn’t right within 90 days, one call to (877) 610-2993 brings us back. Hal’s name is on the shop and on the invoice, and he doesn’t leave work he wouldn’t put on his own driveway.
Gate Parts & Welding in Yonkers
Gate parts fail in Yonkers differently than they do almost anywhere else in Westchester County. Between the salt-heavy winters on our hillside streets and the pre-war iron gates on apartment buildings near the Bronx border, you get a corrosion and stress pattern that most gate companies never learn to diagnose properly. Our Gate Parts & Welding team fixes the gate in your driveway or building entrance, usually the same day we look at it. Hal welds on site, so the gate stays where it belongs instead of disappearing to some shop for a week.
Hinge Replacement
Most Yonkers gates don’t actually fail at the panel. They fail at the hinge post, where winter salt spray from streets like North Broadway has been eating the metal from the bottom up for decades. We cut out the old pin hinges, weld new heavyweight hinges on, and reset the gate so it swings true. For pre-war apartment building gates in 10701 and 10705, we do this constantly. Hinge replacement on a standard residential swing gate in Yonkers usually runs $180 to $340 per hinge set.
Post Replacement
A rusted gate post in Yonkers often looks fine above ground while the footing is crumbling below the concrete line. We see this all over the northeast hillsides where salt runoff pools at post bases. We dig out the old footing, set a new post plumb in fresh concrete, and weld the hinges back on while the gate stays in place. A full post replacement runs $350 to $650 per post, and on tight shared driveways where two houses use one narrow access, we sequence the work so the driveway never fully closes to traffic.
Rail Repair
Swing gates on Yonkers’s steep grades put constant load on the top and bottom rails, especially where the driveway drops sharply toward the street. We straighten bent rails, weld cracked ones, and reinforce stress points with gussets so the same failure doesn’t come back next winter. Rail repair usually costs $150 to $400 depending on how much welding the job needs. If the rail damage came from a gate opener that’s been forcing the gate, we address the opener alignment too, otherwise you’ll weld it and watch it crack again.
Custom Welding
Sometimes the part you need doesn’t exist anymore. A 1940s ornamental gate in southwest Yonkers wasn’t built with off-the-shelf brackets you can order from a catalog. Hal welds custom hinge brackets, reinforcement plates, latch mounts, and decorative repairs on site. If your building’s original iron gate has a broken scroll or a cracked frame member, we can weld it in place without removing the gate from its hinges. Custom welding runs $120 to $280 per hour depending on material and access, and we always quote the job before we strike an arc.
Why do swing gates in Yonkers fail at the hinge post more often than the panel?
Because Yonkers’s steep hillside streets get heavy road salt all winter, and that salt spray collects at the base of the hinge post. The bottom of the post rusts out from the inside while the visible panel still looks straight. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 for a straight assessment.
Do I need entrapment protection on my Yonkers gate, even if it is old?
Yes. Any automated gate in Yonkers should have working entrapment protection, whether it’s a photocell, a safety edge, or a contact sensor. Old apartment building gates in southwest Yonkers often have no safety edge at all, and a closing gate with a failed limit switch is dangerous. We can add entrapment protection to most existing gates without replacing the whole operator.
Brands We Service in Yonkers
We stock parts and service nine major gate brands including Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Common components are in the truck, which means most brands we service get repaired the same day without waiting on a distributor shipment.
Pricing for Gate Repair in Yonkers, NY
| Service | Typical range in Yonkers |
|---|---|
| Hinge or latch replacement | $185 - $285 |
| Gate realignment (single residential gate) | $190 - $320 |
| Post repair or re-set | $260 - $480 |
| Electric opener diagnosis and minor repair | $240 - $520 |
| Full opener replacement on a sloped driveway | $680 - $1,240 |
| Pedestrian gate installation | $900 - $2,400 |
| Single driveway swing gate, manual | $2,400 - $4,200 |
| Single driveway swing gate, automated | $3,500 - $5,800 |
| Sliding gate, automated | $3,200 - $7,500 |
| Double gate system, automated | $4,500 - $9,000 |
| Slide motor replacement on a slope | $1,200 - $1,900 |
| Custom welding (per hour) | $120 - $280 |
What pushes the number up in Yonkers specifically is access. Tight shared driveways off Park Hill mean we often work in a narrow space with a car that has to get through, and that’s slower work. The price we quote is the price on the invoice, always in writing before any work starts.
Neighborhoods We Serve in Yonkers
We work every neighborhood and zip code in Yonkers, including 10702, 10703, 10704, and 10705. From the multi-family blocks of southwest Yonkers near the Bronx border to the single-family hills of the northeast, the service area is the whole city.
- Park Hill
- Nodine Hill
- Crestwood
- Getty Square area (10701)
- Lincoln Park
Typical response time across the city is same-day or next-day for emergencies, and there’s no trip charge inside the county.
Service Area - Cities Near Yonkers
Beyond Yonkers, NY, we work the neighboring communities of Bronxville, NY, Woodlawn, NY, Riverdale, NY, Mount Vernon, NY, and Tuckahoe, NY. Pricing is the same across the county, and the phone is answered live 24/7 no matter which town you’re calling from.
Serving Yonkers, NY - Our Local Coverage Area
Gatewood Fence & Gate crews serve Yonkers and the communities around it; dispatch is coordinated from our New York City office. The map shows the Yonkers coverage area; if your address is on it, we can help.
Also serving nearby: Yonkers, NY, Bronxville, NY, Woodlawn, NY, Riverdale, NY, Mount Vernon, NY, Tuckahoe, NY.
FAQs About Gate Repair in Yonkers
Yes. We work every neighborhood and zip code in Yonkers, including 10702, 10703, 10704, and 10705. From the multi-family blocks of southwest Yonkers near the Bronx border to the single-family hills of Park Hill and Crestwood, the service area is the whole city. No trip charge inside the county.
We answer the phone 24/7 and run after-hours emergency calls for Yonkers properties, especially when a gate is left open and a security concern is involved. A live person takes the call, not a voicemail. We’ll tell you honestly whether it can wait until morning or needs attention that night. Call (877) 610-2993.
How does your pricing in Yonkers compare to nearby cities?
Pricing in Yonkers is generally in the same range as Bronxville or Mount Vernon for labor. What changes in Yonkers is the frequency of salt corrosion damage and the extra work on steep driveway gates, which can mean a little more prep time before the repair. That’s all quoted upfront, not discovered later. Call (877) 610-2993 for a free estimate, and ask about $40 off any repair over $200 plus the permanent 10% discount for seniors and veterans.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim