Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Woodland
Gate repair in Woodland usually comes down to one of three things: a hinge pin that has seized, a post that has rotted or rusted below grade, or a weld that finally let go after 20 years of farm traffic. We fix all three, on site, with the gate still hanging in your driveway. Gatewood Fence & Gate has been doing exactly that since 2001, and we know Woodland’s gates better than most because we work on the pipe-frame and heavy steel gates that fill the 95695 and 95776 ZIP codes. If your gate is sagging, dragging, or refusing to latch, call us at (877) 610-2993 and Hal will talk you through what he thinks is wrong before you spend a dime.
Why Gatewood Fence & Gate Is Woodland’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That matters in a town like Woodland, where people still check whether the person quoting the job is someone they will see at the farmers market on Main Street. Hal has been doing this work since 2001. He answers the phone. When a Woodland gate fails on a Saturday morning, the person who shows up is part of his crew, background-checked and uniformed, and the job carries the 90-Day Done Right Promise in writing. Not a vague assurance. A stamped promise that says if it is not done right, one call brings him back.
We have stood behind work on gates along Gibson Road, in the older neighborhoods off College Street, and out on the rural-residential parcels past County Road 98. The conversations we hear from Woodland customers are consistent: the gate worked fine for years, then a summer heat wave hit, and now the opener groans and the gate binds. We know why that happens here, and we do not charge you to relearn what we already know.
Our Gate Parts & Welding Services in Woodland
Our full Gate Parts & Welding team handles every part of the gate that carries weight or makes contact. In Woodland, that almost always means post replacement, hinge work, rail repair, and custom welding on ag-style gates that were built to last but never got maintained.
Post Replacement
A gate sags in the hinge post, not in the middle. That is where we start. In Woodland, hinge posts on older properties often rust below ground level because winter tule fog keeps the base damp for weeks. We cut out the old post, pour a new footing set for the gate’s actual weight, and weld or bolt a fresh post to match the existing rail. Then we rehang the gate so it swings level, not binding at the latch end.
Hinge Replacement
Hinge pins on Woodland’s pipe-frame gates take a beating from both dust and condensation. Field dust works its way into the pin sleeve and acts like lapping compound. Fog adds rust. The result is a pivot that seizes, then tears the mounting bolts out of the post when the opener forces the gate. We replace hinges with heavier barrel or greasable ball-bearing hinges sized for the actual gate weight, and we weld the hinge tabs rather than trusting old bolts in a wallowed-out post.
Rail Repair
Slide gates out toward the 95695 rural fringe collect Yolo County field dust in the U-channel and V-track. The dust grinds down nylon rollers, and the gate starts to lurch and chatter. When the top rail is bent or the bottom track is out of alignment, we straighten and reinforce the rail, true the track, and replace the rollers with sealed-bearing units that hold up better in dust. The fix is usually a few hundred dollars, not a new gate.
Custom Welding
This is the work Hal genuinely likes. A cracked weld on a 30-year-old steel swing gate, a broken latch mount, a hinge strap that ripped off the frame, a bent section of top rail that needs to be cut out and replaced. We weld on site, in your driveway, with the gate still on its hinges. The weld matches the existing steel so the repair does not look like a patch. If the old gate is worth saving, we save it. If it is not, we will tell you that too, and explain exactly why.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woodland
Most of the automatic openers we see in Woodland are the same brands found across the Sacramento Valley: Viking, DoorKing, Ghost Controls, and Elite, along with LiftMaster and the rest. We are certified to service nine major gate brands, and we keep common parts on the truck: limit switches, control boards, photo-eyes, and the rollers and hinge pins that we replace most often on Woodland service calls. If your opener is an older DoorKing or a Viking unit that has been out in the fog for fifteen years, we can usually tell you over the phone whether the part is still worth sourcing or whether it is time for a retrofit kit.
Common Gate Parts & Welding Problems We See in Woodland Homes
- Dust-jammed slide-gate tracks: Fine field dust off surrounding Yolo County crops accumulates in U-channel tracks, grinding nylon rollers into ovals and jamming limit switches. This is a 95695 problem as much as a county problem. We keep extra rollers and limit-switch assemblies stocked specifically for these calls.
- Rust-seized hinge pins from tule fog: Woodland’s winter fog saturates unpainted hinge pins and latch mechanisms for days at a stretch. The rust seizes the pivot, the opener keeps pulling, and the mounting bolts tear out of the post. We see this exact failure on older swing gates throughout Woodland, including the Victorian-era and Craftsman properties near the historic downtown core.
- Pre-UL 325 operators without safety photocells: Gates installed 25 or 30 years ago on Woodland properties often lack the safety photocells modern code requires. If the gate gets daily use on an active ag parcel, that is an entrapment hazard we recommend correcting quickly, not eventually.
- Thermal expansion binding on steel frames: Sacramento Valley summers push past 100 degrees routinely. Steel expands. Gates that fit fine in March bind in August. We can usually correct this with hinge adjustment and a small amount of latch-side clearance work, rather than cutting and rewelding the frame.
Pricing for Gate Parts & Welding in Woodland, CA
Here are the numbers we actually quote in Woodland. Hinge replacement on a standard steel swing gate runs $175-$325 depending on gate weight and how many hinges need to be replaced. Post replacement with a new concrete footing runs $350-$650. Custom welding repairs, like a cracked frame rail or a torn hinge mount, typically run $150-$400, depending on the length of weld and how much grinding and rework the old steel needs. Slide-gate roller replacement runs $180-$380, including track cleaning and limit-switch adjustment. Opener circuit board replacement runs $250-$500 depending on the brand and whether you want a factory board or a compatible retrofit. Every price is quoted and agreed before any work starts. You will not see a bigger number at the end. If you already have a written estimate from another company, we will give you a free second opinion. And we do not charge a trip fee for service calls inside the county.
Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Woodland
If you are reading this from outside Woodland, we also handle Gate Parts & Welding in Woodland and the surrounding communities, including Davis, West Sacramento, Winters, and Sacramento. The same crew, the same 90-Day Done Right Promise, and the same live person answering the phone.
Serving Woodland, CA - Our Local Coverage Area
We’re based in the Woodland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Woodland
In most cases, you need new hinges and possibly a new post. The sag is almost always at the hinge post, not in the middle of the gate. When the hinge pins seize from tule fog rust, the opener starts pulling unevenly and the gate drops at the latch end. We replace the hinges and rehang the gate, then check whether the post itself is sound. Call (877) 610-2993 and we will tell you straight whether your gate is worth saving.
Yes. If your gate was installed before the UL 325 standard went into effect, it likely lacks the photocells and edge sensors that are now required. A gate that gets daily use on a rural-residential property is an entrapment hazard without them. We install retrofitted photo-eyes on older LiftMaster, DoorKing, and Viking operators all over Woodland, and it is a straightforward job.
Because Yolo County field dust gets into the U-channel track and grinds the nylon rollers down. What would last five years in a city lot lasts maybe two out near the field edges. We replace the rollers with sealed-bearing units and clean the track, and we can adjust the limit switches that the dust tends to jam. That same dust is why we keep extra rollers stocked for Woodland calls specifically.
Yes, and that is usually the right move. We cut out the old post at the footing, pour a new footing if the old one is cracked or shallow, and weld a fresh steel post to match the pipe-frame. The gate stays on site the whole time. You do not pay to haul anything away, and you do not buy a new gate when the old one still has decades left.
Usually, yes, if the gearbox and arm are still sound. A new control board runs $250-$500 for most LiftMaster models we see in Woodland. The question is whether the rest of the operator is worth keeping. If the chain-drive rail is worn and the gearbox is loose, a new board is money spent on a system that will fail again. We will tell you which one you have and what we would honestly do.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woodland since 2001.