Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Woodland
We install driveway gates, pedestrian gates, sliding gates, swing gates, and double gates throughout Woodland, and we’ve been doing it long enough to know what this town’s soil, heat, and fog actually do to steel and operator motors. A standard residential gate installation in Woodland typically runs $1,800 to $4,200 depending on gate width, operator type, and whether you need solar power or have existing line voltage at the post. Hal Gatewood has been at this since 2001, and he’ll walk you through the numbers before any work starts. Call (877) 610-2993 and you’ll get a live person, not a queue.
Why Gatewood Fence & Gate Is Woodland’s Preferred Gate Installation Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal’s name is on the shop and on every invoice. That’s the accountability we grew up with, and it’s how we still work in Woodland.
When we install a gate in the 95695 ZIP or the 95776 ZIP, we account for what this area actually does to hardware. The summer heat out here exceeds 100°F routinely, which expands steel frames and binds swing gates against latch posts. The winter tule fog sits on uncoated hardware for days and corrodes hinge pins in a single season. That’s not a theoretical concern. It’s what we see on service calls every spring.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. We answer calls around the clock, and the person you talk to is local, not a call center three states away.
We’re also the crew that repairs what other companies want to replace. If your existing gate has good bones and a bad hinge or a tired operator, we’ll tell you that. We provide Gate Parts & Welding in Woodland on site, in your driveway, so the work stays exactly where it belongs.
Our Gate Installation Services in Woodland
This is the core of what we do. And in Woodland, the gates we install tend to be wider, heavier, and more demanding than what you’d see on a typical suburban Sacramento lot. Here’s how each type of Gate Installation actually shakes out here.
Driveway Gate Installation
Woodland’s edges are dotted with rural-residential parcels and working ag properties off roads like County Road 98 and County Road 25A. These driveways aren’t 12 feet wide. They’re 16, 20, sometimes 24 feet. That means heavier steel, deeper post footings, and an operator sized for the span. We install single and double driveway gates, with solar power where pulling grid power from the house would cost more than the gate itself.
Pedestrian Gate Installation
Inside the city, from the Victorian and Craftsman homes near downtown to the ranch houses built in the 1950s and 60s, we install pedestrian gates that match the age and character of the home. Narrow side-yard gates, garden gates, and matching entry gates next to a wider driveway gate. If the existing post is still solid, we’ll build the gate around it instead of tearing out good work just to bill more.
Sliding Gate Installation
Sliding gates are common on Woodland’s larger properties because they don’t swing into the driveway and they handle wide openings well. But here’s the thing most homeowners don’t discover until winter: field dust from surrounding Yolo County crops gets into the U-channel or V-track and grinds nylon rollers down fast. When we install a sliding gate in Woodland, we account for that from day one, with sealed rollers, proper track drainage, and operator placement that won’t choke on dust. We install FAAC and BFT slide operators regularly.
Swing Gate Installation
Swing gates, both single and double, are the workhorse on Woodland acreage. We install heavy steel pipe-frame gates that match the agricultural style of the area, with hinge posts set deep enough to handle a 20-foot span without sagging. A gate sags in the hinge post, not in the middle, and that’s where we start. Thermal expansion in summer can bind a steel swing gate against the latch post, so we build in proper clearance and use operators that can handle the load, including Linear and Viking models.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woodland
We’re certified to service nine major gate brands, and for Woodland work we most commonly install and service FAAC, BFT, Linear, and Viking operators. We carry parts for these units locally, so when a limit switch fails on a Viking G-5 or a FAAC board corrodes from tule fog moisture, we don’t have to order from out of state and make you wait. We can also match existing equipment if you’re replacing one side of a double gate or upgrading an old opener without replacing the whole gate.
Common Gate Installation Problems We See in Woodland Homes
These are the failure patterns we actually see on service calls here, not generic talking points from a national brochure.
- Dust-packed slide gate tracks. Field dust off the surrounding Yolo County crops builds up in U-channel and V-track systems quickly, grinding nylon rollers down to the hub within a season and tripping limit switches on automatic openers. We keep extra rollers and limit-switch assemblies stocked specifically for calls in the 95695 rural-fringe addresses.
- Tule fog corrosion. Winter fog here isn’t a quick morning mist. It settles for days, condensing on hinge pins, V-track hardware, and operator circuit boards. By early spring, we see corrosion failures on equipment that would last far longer in a drier setting like West Sacramento.
- Thermal expansion binding swing gates. When it’s 105°F, steel frames expand enough to bind against the latch post. That stresses the operator motor and strips rack-and-pinion gears on wide farm entrances. Proper clearance at installation is the difference between a gate that works for a decade and one that eats a motor every two years.
- Undersized operators on wide farm gates. A 20-foot steel gate is not the same job as a 12-foot suburban aluminum gate. When someone installs an operator too small for the span and the weight, the motor fails early and the gate drifts. We size operators for the actual gate, not for the lowest bid.
Pricing for Gate Installation in Woodland, CA
Here’s what we see in Woodland’s market, with real numbers. A standard single swing driveway gate with a basic operator typically runs $1,800 to $3,200. A double swing gate or a wide sliding gate on acreage properties runs $3,500 to $6,500, and that’s before solar power if you need it. Solar adds $600 to $1,800 depending on panel size, battery capacity, and whether we’re building a standalone post or mounting to an existing one. A pedestrian gate with a keypad runs $900 to $2,400 depending on materials and whether you want remote access.
The quote we give you is the price. It’s agreed before any work starts, and it doesn’t change at the door. We don’t do trip charges inside Yolo County, we offer a free second opinion on any written estimate, and we take $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll come out, measure, and put the numbers on paper.
We Also Serve Cities Near Woodland
If you’re in Davis, West Sacramento, Winters, or parts of Sacramento, the same crew that installs gates in Woodland can handle your job too. We schedule work from our Sacramento office, but the crews working on your gate live and work in Yolo County. You’ll see the same truck, the same uniform, and the same name on the invoice.
Serving Woodland, CA - Our Local Coverage Area
We’re based in the Woodland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Woodland
Yes, and this is extremely common in the 95695 ZIP. If there’s no existing line voltage at the gate post, running conduit from the house or barn can cost more than the gate itself. We install solar-powered operators with battery backup, sized for wide farm gates and for the foggy winter days when panels get less sun. The system stores enough power to operate the gate normally through a week of tule fog. Call (877) 610-2993 for a site visit and we’ll check sun exposure and panel placement before quoting anything.
Field dust from surrounding Yolo County crops gets into the U-channel or V-track and acts like sandpaper on nylon rollers. It’s a pattern we see across Woodland’s rural-fringe addresses but rarely in urban Sacramento, where gates are mostly ornamental iron and dust is minimal. When we install a sliding gate here, we use sealed rollers, add proper track drainage, and set the operator so the limit switch doesn’t jam on packed dust. We also stock replacement rollers locally so we can swap them same-day when they do wear.
That depends on the gate’s actual weight and span, not just the width printed on the box. A 20-foot steel pipe-frame farm gate needs a heavier-duty operator than a 12-foot suburban gate, and we size by both leaf weight and duty cycle. We use Linear, Viking, FAAC, and BFT operators, and for wide agricultural entrances we often install rack-and-pinion drives instead of belt drives. If you’re not sure, that’s why we come out and measure before quoting. The number is (877) 610-2993.
Tule fog creates ground-level humidity that lingers for days, and it condenses on every piece of uncoated metal on your gate. Hinge pins, track hardware, and operator boards are all vulnerable. That’s why we use coated or stainless hardware on installations here, and why we mount operator circuit boards in sealed housing with proper drainage. A new gate installed without those considerations will show corrosion by spring. The fog is a fact of life in Woodland, and the hardware needs to be ready for it.
Yes. This is standard work for us on rural-residential and ag parcels around Woodland. We install slide or swing gates with our Gate Access Control in Woodland, including keypad, remote, and vehicle-sensor entry, sized low enough or tight enough to keep livestock in, and set so you can drive through without getting out. The operator can run on solar or line voltage, and we’ll build the gate style to match what’s already on your property. Call us and we’ll walk the entrance with you.
Call Gatewood Fence & Gate for Woodland Gate Installation
If you need a gate installed on your Woodland property, call (877) 610-2993. We’ll answer in person, schedule a time to come out and measure, and put a written price in your hand before any work starts. Hal Gatewood has been doing this since 2001, and his name is on the shop, the truck, and the invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woodland with gate installation, Gate Repair - Woodland, and on-site welding.