Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Hollywood
Gate parts and welding in West Hollywood usually means one of two things: a hinge post that’s rotted through at ground level, or an old automated gate that’s been tearing itself apart for months. We fix both, usually in one visit. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the person who answers our phone at (877) 610-2993 is a live human being, day or night. If you live anywhere in 90069, from the flats near Santa Monica Blvd to the hillside streets north of Sunset, we’ll get to you fast.
We don’t haul your gate back to a shop. We weld on site in your driveway, on your gate, with the post still in the ground when that’s the right call. That’s how we’ve handled Gate Parts & Welding since day one. And it’s why a lot of West Hollywood property managers keep our number saved.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Parts & Welding Company
We’ve worked on enough Bird Streets gates to know them by name. Not the celebrities, the gates. The old FAAC slide operators that grind when the Santa Anas push against them. The Spanish Colonial courtyard gates along Fountain Ave with hinge posts that look fine until you touch them and the rust crumbles in your hand. Hal doesn’t send a sales rep to your door. He sends a welder who can tell you in the first ten minutes whether your gate is worth repairing or whether you’re throwing good money at a frame that gave up years ago.
Every job we do in West Hollywood carries the 90-Day Done Right Promise in writing. If it’s not right, we come back. No runaround, no phone tree. Our customers in West Hollywood deal with the same thing you do: steep driveways, old hardware, and an expectation that things simply work. We show up when we say we will. We quote a price before we strike an arc, and that price doesn’t change when the invoice comes.
We answer calls around the clock. Not a voicemail, not a chatbot, not a call center three states away. Call (877) 610-2993 at any hour and a person picks up. That matters when your gate is stuck open at 2 a.m. and you live on a hill where every paparazzo and delivery driver knows the house numbers.
Our Gate Parts & Welding Services in West Hollywood
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. On West Hollywood’s 1920s and 1930s Spanish Colonial and Mediterranean courtyard buildings, we routinely find hinge posts that look serviceable but have rotted through inside the footing from decades of irrigation overspray. Replacing just the hinge without addressing the post means you’ll be calling us again next spring. Hinge replacement in West Hollywood typically runs $180-$320 per hinge depending on the weight of the gate and whether we need to fabricate a custom barrel hinge. Stainless steel hinges and fixings are the only spec we recommend for anything exposed to sprinkler overspray here.
Post Replacement
Post replacement is the repair we do most often on West Hollywood courtyard gates. The bottom six inches of a mild steel post sitting in irrigated soil is the first thing to go. Galvanized posts fare better, but forty years of damp soil wins eventually. We set new post footings with concrete, weld a reinforced post into place, and drill for thru-bolt stainless fixings rather than relying on whatever was originally smeared on there. Post replacement for a standard pedestrian gate in West Hollywood runs $350-$700 depending on depth, access, and whether we need to break out and re-pour the footing. For automated swing gates on slopes, expect to add $200-$400 for rebalancing the gate after the new post goes in.
Rail Repair
Rail repair on a West Hollywood gate usually means one of two things. On the flats, it’s a rust-eaten bottom rail on a pedestrian gate where the original builder used painted mild steel instead of galvanized. On the hillsides, it’s a slide gate rail that’s been pounded out of alignment by repeated Santa Ana wind events, which bends the frame and strips teeth off the rack and pinion. We straighten what’s worth straightening, weld in new sections where the metal’s too far gone, and re-pin the rail to the post so it stops wandering. Rail repair typically runs $220-$450, with time and materials for longer runs of replacement rail on full-size driveway gates.
Custom Welding
Custom welding is what happens when your gate doesn’t fit a catalog part. On hillside driveways north of Sunset, that’s almost always the case. We weld new operator mounts onto old post footings, adapt modern arms to vintage swing gates, and fabricate drop rods and latch strikes that match the original ironwork on a 1930s courtyard gate. Custom welding in West Hollywood is quoted as time and materials, generally $120-$180 per hour plus stock, because no two jobs are the same. We’ll give you a written price before we start. You’ll know what it costs before the welder even unloads the machine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We’re certified to service nine major gate operator brands, and in West Hollywood that usually means working on Viking, Ghost Controls, and DoorKing systems. Hillside properties north of Sunset especially are full of old Viking swing arms and DoorKing slide operators that have been there since the house was last remodeled. We stock common parts for those brands and we know where to source the obsolete ones that property managers assume aren’t made anymore. If a board can be repaired, we repair it. If it can’t, we’ll retrofit you to something current without charging for parts you don’t need. Our West Hollywood customers don’t have time for a gate that’s down while someone special-orders a part from overseas.
Common Gate Parts & Welding Problems We See in West Hollywood Homes
- Rotted hinge posts at ground level. Decades of irrigation overspray and the damp microclimate around planted courtyard beds eats through mild steel posts at the footing. The gate sags, the latch stops aligning, and the hinges start pulling out of the post. Welding the panel doesn’t fix the post. Replacing the post fixes it.
- Wind-damaged slide gates from Santa Ana events. Autumn winds in the hills north of Sunset slam unsecured swing gates hard enough to bend frames and strip teeth off slide-gate rack and pinion. We see this every October. Gate braces and wind-rated stops are cheaper than a new rack and pinion assembly.
- Obsolete FAAC and Elite operators failing silently. Many late-90s and early-2000s automated gates on the Bird Streets run original FAAC or Elite motors that fail when their loop detectors and safety photocells degrade from years of UV and dry heat. The gate stops mid-cycle or refuses to close. We stock legacy components and know compatible retrofits.
- Weak welds from previous repairs. We get called out to a lot of gates that somebody else “fixed” last year. The weld looks fine from the curb and cracks the first time a delivery truck backs into the gate. A proper repair welds the root, grinds it clean, and primes it for paint the same day. Hal takes sloppy work personally.
Pricing for Gate Parts & Welding in West Hollywood, CA
Hinge replacement in West Hollywood typically runs $180-$320 per hinge. Post replacement for a pedestrian gate runs $350-$700. Rail repair runs $220-$450. Custom welding is quoted at $120-$180 per hour plus stock. Automated gate retrofits and operator mount welding are priced on site but start around $500 for a straightforward board and arm conversion. Every estimate is free and every price is quoted and agreed before any work starts. We never show up with one number and leave an invoice with another. We also knock $40 off any repair over $200, and there’s no trip charge anywhere inside Los Angeles County. Seniors and veterans always get 10% off, permanently, no need to ask twice.
We Also Serve Cities Near West Hollywood
If you’re just outside West Hollywood, we work across Beverly Hills, Century City, Hollywood, and Universal City too. Same crew, same 90-Day Done Right Promise, same live person on the phone at (877) 610-2993. Call and tell us what the gate is doing. We’ll tell you straight whether it’s a weld fix or a motor issue.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Hollywood
Because the problem is rarely the panel. On most West Hollywood courtyard gates, the hinge post has rotted through at ground level from irrigation overspray and damp soil, so the post itself is moving. Welding the panel just transfers the stress somewhere else. Post replacement with a galvanized or stainless steel post and proper drainage at the footing is the fix that lasts. Call (877) 610-2993 and we’ll inspect it for free.
Yes, and we do it regularly. Most late-90s and early-2000s automated gates north of Sunset were built heavy enough to outlast their operators. We weld a reinforced mount plate directly onto the existing frame, align the new operator, and adjust travel limits. That saves the cost of a full gate replacement and usually gets your driveway gate working same visit. Estimates are free.
UL 325 is the standard for automatic gate operator safety, and the two things we check on every West Hollywood service call are the external entrapment protection devices: photocells or contact edges that stop the gate if something’s in the path, and a functioning reversing mechanism. Older FAAC and Elite systems were installed before current standards and often have degraded safety devices from years of UV exposure. We test those first and recommend upgrades before they fail. Call us to have any automatic gate checked.
If the motor still turns but the control board has failed, we can usually replace the board or source a compatible aftermarket version. If the motor housing is cracked, the gearbox is stripped, or the actuator arm is seized, you’re better off with a retrofit. We’ll tell you which one it is after a quick inspection, and we’ll quote both options in writing before any work starts. A retrofit often costs less than you expect because we reuse your existing gate and mount.
Yes. We don’t try to sell you a whole new gate when one post is the problem. We cut out the rotted post, set a new galvanized or stainless post in fresh concrete, re-hang the existing gate, and weld the original decorative ironwork back on if it’s salvageable. Total cost typically lands between $350 and $700 for a standard pedestrian gate. Call (877) 610-2993 for an exact quote. Estimates are free.
West Hollywood’s Salt Air, Hillside Gates, and What Actually Lasts
Here’s what we know from years of welding on West Hollywood gates: the closer you are to the marine layer that creeps through the canyons, the faster mild steel disappears. Combine that salt air with intense UV and long dry heat, and you get painted steel that looks okay from a distance and disintegrates at the welds and the base of every post. Irrigation overspray on the flats adds constant moisture at ground level. On the hillsides, it’s wind load. Santa Ana events slam gates hard enough to bend a 1-inch steel frame. We spec galvanized steel and stainless fixings for every West Hollywood repair because painted mild steel is a five-year fix in this climate. Galvanized costs more up front. It costs less than replacing the same post twice.
We rebuilt a swing gate on a Bird Streets driveway where the hinge post had rotted through at the footing and the FAAC operator was tearing its rack and pinion on every cycle. Our crew set a new post footing, welded in a reinforced hinge post, and converted the old Elite board to a LiftMaster retrofit so the property manager didn’t have to tell the client the gate was down for a week. That’s the work we do. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
If your gate is sagging, grinding, or refusing to close in West Hollywood, call (877) 610-2993 now. A live person answers. We’ll send someone who knows West Hollywood gates, quotes a price before any work starts, and stands behind the job for 90 days. In writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since 2001.