Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Weddington
Gate parts and welding in Weddington usually mean one of two things: a sagging ornamental gate that won’t close square, or a broken weld on custom ironwork that was fabricated to match the house. Most repairs run $180 to $650 depending on whether we’re replacing hinges, rebuilding a post footing, or welding cracked scrollwork. We get to Weddington fast, we weld on site so your gate never leaves the driveway, and every job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 and a live person answers, day or night.
Hal Gatewood has been doing this since 2001. His name is on the shop, his address is published, and his crew knows Weddington’s gates better than most people know their own driveways. You want a fix that holds. That’s what we do.
Why Gatewood Fence & Gate Is Weddington’s Preferred Gate Parts & Welding Company
Weddington isn’t Ballantyne. The zoning here demands large lots, which means most homes sit behind private driveway gates on estate parcels rather than sharing an HOA entrance. That changes the work. Our Gate Parts & Welding team deals mostly with individually owned, bespoke iron and steel systems, not standardized community gates that get serviced on a rotation. We know the difference because we’ve been out here for years, and we keep a mental map of which Weddington properties have what: ornamental swing gates off Providence Road, heavy slide gates on wooded lots near the 28277 zip, farm gates on equestrian parcels that see daily horse trailer traffic.
Our customers in Weddington tend to notice the same things. The person who shows up is the person whose name is on the invoice. The price quoted before work starts is the price on the final bill, because that’s how Hal runs things. And the work is done in your driveway, not hauled to some shop forty minutes away where you can’t watch what’s happening. We carry a strong local reputation here, and Weddington homeowners routinely tell us the same thing: they called somebody else first, got a runaround, then called us.
The 90-Day Done Right Promise is stamped on every job we do in Weddington. If something isn’t right, one call brings Hal back. No fine print, no argument. That promise exists because we fix our work rarely enough to afford making it. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Those aren’t gimmicks. They’re just how we do business.
Our Gate Parts & Welding Services in Weddington
Most Weddington gate problems come down to four things: the hinge, the post, the rail, or the weld. Here’s what each involves.
Hinge Replacement
Hinges on Weddington estate gates carry serious weight. A 14-foot ornamental iron gate can weigh 600 pounds or more, and when the original hinge barrels wear out or the leaf drops, the gate starts dragging on the latch side. We replace hinges with heavier-duty ball-bearing units and rehang the leaf so it swings true. On custom gates, we often weld reinforcement plates behind the hinge mounts while we’re at it, because the steel there takes more stress than people realize. Typical hinge replacement in Weddington runs $180 to $340 per gate leaf, depending on access and gate weight.
Post Replacement
This is the big one around here. Weddington sits on Piedmont red clay, and that soil expands and contracts with seasonal moisture far more than the sandy loam you find closer to the coast. A hinge post set without a deep enough footing shifts by fractions of an inch every year until the gate won’t latch and the welds at the post base start cracking. You can fix the panel without fixing the post, but you’ll fix it twice. We dig out the old post, set a new one in a deeper concrete footing sized for the gate weight, and weld the hinge mounts back into position. Post replacement in Weddington typically costs $400 to $900, including the new steel post and concrete work.
Rail Repair
Rails are the horizontal members that hold the pickets together. On Weddington gates, the bottom rail takes the most abuse, especially on equestrian properties where trailers clip the lower section or mud splashes up and accelerates corrosion. We repair or replace bottom and mid rails, and we weld cracked rail-to-picket joints in place so the gate keeps its original lines. A typical rail repair runs $150 to $400 depending on how much of the rail needs to be cut out and replaced.
Custom Welding
If your gate has decorative scrollwork, curved pickets, or a custom crest, you don’t want somebody grinding it down and globbing a weld over the joint. We match the existing work. Hal has been welding since before he started this company, and his crew can replicate the profile and texture of ornamental iron so a repaired scroll looks like it was always there. Custom welding on Weddington gates runs $200 to $800 depending on the scope, and we do it on site, in your driveway, while you watch if you want to. We also fabricate entirely new gate sections when a repair won’t hold: new pickets, new scrollwork, new latch plates, matched to the existing finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weddington
We service the automation side too, because most Weddington entry gates are automated. We’re certified on nine major brands, and the ones we see most on Weddington properties are Linear, Viking, and DoorKing. These operators sit out in the elements year-round, and Weddington’s freezing rain events are hard on them. When a Linear actuator burns out or a Viking control board gets fried by ice bridging the terminals, we stock common parts locally so we’re not waiting on a distributor to ship from out of state. That means faster turnaround for Weddington customers. We also keep a supply of Ghost Controls and other opener parts for the lighter slide and swing units on smaller estate parcels.
Common Gate Parts & Welding Problems We See in Weddington Homes
- Shifted hinge posts from red clay soil. Weddington’s expansive clay pushes posts out of plumb every wet-dry cycle. We see swing gates that won’t latch by late summer and won’t close at all by winter. The fix is a deeper post footing, not a bigger latch.
- Ice-burned slide gate operators. Freezing rain is more common here than snow, and it’s worse on automated gates because the operator keeps trying to move a gate that’s stuck. Motors burn out, rack teeth strip, and circuit boards fail. We replace the damaged parts and adjust the safety settings so the operator doesn’t fight the ice next time.
- Cracked welds at decorative scrollwork. Custom ornamental gates flex as they swing, and the tight-radius scroll joints are the first to crack. It’s not a safety issue on every crack, but left alone the scrollwork can separate and snag a sleeve or a horse. We weld those joints before they let go.
- Farm gate latch failures on equestrian properties. Weddington has a real number of working horse properties, and those heavy galvanized paddock and pasture gates get opened and closed dozens of times a day. The latches wear out fast. We replace them with heavier hardware and weld the mount plates so they don’t tear out.
Pricing for Gate Parts & Welding in Weddington, NC
Here are the ranges we quote in Weddington for the most common jobs:
- Hinge replacement: $180 to $340 per gate leaf
- Post replacement: $400 to $900, including concrete and new steel post
- Rail repair: $150 to $400
- Custom welding (scrollwork, pickets, latch plates): $200 to $800
- Full gate section fabrication: $600 to $1,500, depending on size and design
What moves the price is gate weight, access, and whether the post footing needs rebuilding. We quote it before we start, and the quote doesn’t change at the door. Every estimate is free. We’ll come out, look at the gate, write the number down, and you decide. No trip charge inside the county, and $40 off any repair over $200. Call (877) 610-2993 to schedule.
We Also Serve Cities Near Weddington
Our Weddington customers often have family or business in the surrounding towns, and we cover those too. We do gate parts and welding work in Pineville, Marvin, Wesley Chapel, and Matthews on a regular basis. If you’re in one of those areas, the same crew, the same promise, and the same phone number apply. This page is focused on Gate Parts & Welding in Weddington, but the team doesn’t stop at the town line.
Serving Weddington, NC - Our Local Coverage Area
We’re based in the Weddington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Weddington
Weddington sits on thicker deposits of Piedmont red clay than Ballantyne’s more heavily graded and engineered subdivision pads. That clay absorbs water and swells, then shrinks dry in summer, and the cycle moves gate posts a little each season. Ballantyne’s HOA gates were mostly built on compacted fill with engineered footings; Weddington’s custom estate gates were often set by the original builder with whatever depth looked right at the time. Call (877) 610-2993 if your post is drifting, and we’ll tell you honestly whether it needs a new footing or just re-shimming.
Yes. We don’t just close the crack, we match the profile, texture, and finish of the surrounding iron. On a Weddington equestrian estate off a private drive in the 28277 zip, our crew addressed a sagging ornamental swing gate where the hinge post had shifted in red clay. We replaced the post footing, fabricated a reinforced steel hinge post, rehung the gate with new ball-bearing hinges, and welded a cracked picket before adding a safety photocell, restoring smooth operation and UL 325 entrapment protection. That’s the standard we bring to every custom repair.
Usually yes. Long private drives on an estate-scale lot need a loop detector out by the road so the gate starts opening before you get to it, and the opener has to be sized for the gate weight and the swing distance. A big ornamental gate on a 300-foot driveway is a different animal than a five-foot chain-link gate on a residential lot in Matthews. We service Linear, Viking, and DoorKing openers, and we can wire a new loop into an existing system. Estimates are free.
Freezing rain coats the track or the hinges, and the operator pushes against the ice until something gives: a stripped gear, a burned motor, a fried board. It’s worse on slide gates because the ice jams the wheels in the track. We replace damaged components and adjust the operator’s force settings so a future ice event makes it stop trying instead of destroying itself. Call (877) 610-2993 and we’ll get out to Weddington fast, because a stuck gate is also a security problem.
Every automated gate in Weddington is subject to UL 325, which requires entrapment protection: photocells or contact edges that reverse the gate if something is in the path. It’s not optional, and if your gate was installed before the current standard, it probably doesn’t meet it. We install and test safety edges and photocells on every gate we touch. We also have a warning for the DIY-inclined: gates and openers involve high-tension springs, heavy steel, and electrical wiring. If you’re unsure, call a trained professional rather than risking serious injury. That’s us. The estimate is free.
Call Gatewood Fence & Gate for Gate Parts & Welding in Weddington
If your gate is sagging, dragging, cracked, or just won’t run, call (877) 610-2993. A live person picks up, 24 hours a day. We’ll schedule a time to come out, look at the gate, and write a price you can hold us to. Hal’s crew does the work on site, in your driveway, and every job gets the 90-Day Done Right Promise. You can drive to the shop and look him in the eye if you want. The name’s on the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Weddington since 2001.