Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Weddington
If your gate motor in Weddington has quit, slipped out of alignment, or started groaning like it’s on its last leg, our Gate Repair in Weddington can usually be at your driveway the same day you call. Gate motor & opener work in Weddington runs $225 to $480 for common repairs and $900 to $2,400 for full motor and operator replacements, depending on the gate’s width, weight, and power source. Hal Gatewood owns the company, answers the phone himself at (877) 610-2993, and still shows up on job sites with tools in hand after 24 years of this work.
Weddington is different from the subdivisions down Providence Road. The gates here are wider, heavier, and often running on solar because the paddock is three hundred yards from the house. We account for that before we quote a single number.
Why Gatewood Fence & Gate Is Weddington’s Preferred Gate Motor & Opener Company
Homeowners around Weddington call us because we show up when we say we will. That is rarer than it should be. We’re locally owned and owner-operated since 2001, with a published shop address and a license number you can verify. Hal’s name sits on the shop and every invoice. The person who answers your 2 a.m. call is a live person, not a voicemail tree.
Our Gate Motor & Opener crew has pulled through the gates of Providence Woods, Weddington Chase, and the acreage spreads off Antioch Church Road enough times to know which operators hold up and which ones fail on the first ice storm. That matters when you’re standing at the keypad and the gate won’t move. We don’t do call centers, and we don’t do subcontractors. The crew that quotes your repair is the crew that fixes it.
Every job from Weddington to the Union County line carries our 90-Day Done Right Promise in writing. If the same motor fault returns inside 90 days, one phone call brings Hal back, no argument and no second invoice. He means it. The name is on the shop, and the shop is down the road in the Charlotte area, which means you’ll see us again at the hardware store if we let you down.
Our Gate Motor & Opener Services in Weddington
We handle the full range of Weddington gate automation, from small residential swing operators to heavy slide gates spanning a double-wide farm entrance. Here’s where most of our Weddington calls land.
Motor Installation
New Gate Installation in Weddington for motor and operator work typically runs $950 to $2,400, including the operator, mounting hardware, safety sensors, and programming. On acreage estates we frequently install solar gate opener systems because running conduit from the house to a rear paddock gate costs more than the opener itself. We’ll wire it to the same keypad or intercom as the front gate so you don’t carry two remotes.
Weddington’s driveway gates lean heavy: ornamental iron, sometimes ten or twelve feet wide, and often custom fabricated. We size operators for the actual leaf weight and wind load, not the generic chart in a big-box manual. A gate sags in the hinge post, not in the middle, and a proper installation starts there.
Motor Repair
Motor repair in Weddington runs $225 to $480 for most calls, parts included unless the motor itself has burned out. Red clay soil shifts hinge posts seasonally here, and that gradual movement is the leading cause of swing gate motor strain we see from Weddington Chase to the equestrian estates off Beulah Church Road. Show me the gate closing on its own and I’ll show you where it’s failing.
We fix the gate in your driveway. We weld on site. If a bracket is cracked, we repair it rather than swapping a whole operator that still has years in it. That repair-first habit is why a lot of Weddington customers who started with one gate now have us servicing two or three.
Linear Motor
Linear arm operators on wide slide and cantilever gates in Weddington work hard. The long travel, the red dust, and the occasional livestock bump all take a toll. We service Linear, FAAC, BFT, and Viking linear motors on farm entrances and estate gates. Typical linear motor repair here lands between $275 and $520. When a farm gate’s linear motor fails from cattle pushing against it, many generic repair outfits misdiagnose it as an electrical fault and swap the board. The drive gear wears first. We check the load path before the circuit.
Slide Motor
Slide gate motors in Weddington see two seasonal enemies: July humidity rusting the chain and track, and freezing rain gluing the rollers to the rail. Replacement motors and full drive assemblies run $1,100 to $2,800 installed, depending on gate length and whether the track and rollers also need replacement. On long private drives off Newtown Road and beyond, many slide gates are the property’s only real access control, so when they fail, the place is open. We treat those as priority calls.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weddington
We service nine major gate motor brands, including FAAC, BFT, Linear, and Viking for Weddington’s heavier residential and farm gates. LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule round out the list for the smaller units on pool enclosures and secondary entrances. Because Weddington’s larger estate gates skew toward FAAC and Linear, we keep the common drive gears, loop detectors, and limit switches for those brands stocked in the service van. That means fewer second trips. A live person answers every call, and that person can usually tell you same day when we’ll roll through your gate.
Common Gate Motor & Opener Problems We See in Weddington Homes
- Swing gates drifting out of alignment after rain. The Piedmont’s expansive red clay swells and shrinks with the seasons, slowly moving hinge posts. The motor then labors against a leaf that no longer matches its limit settings, and the capacitors or gearbox fail early. The fix is correcting the post and the leaf geometry, not just reflashing the operator.
- Slide gates seized after freezing rain. Weddington sits in the Carolina ice-storm belt. Ice on the track jams rollers, and the motor strains until something gives, often the circuit board in an unprotected control box. If your board fried during the last storm, it’s worth relocating the control box to a shaded but sealed position and adding a track heater strip on the next visit.
- Equestrian estate front and rear gates failing on the same call. The decorative iron front gate might have a failing loop detector so it won’t open for the delivery truck but still opens for your cars. The rear farm gate may have a solar opener with a dying battery or a linear motor worn from livestock pressure. We’re used to doing both in one visit because Weddington properties often have both.
- Long driveway openers running on undersized solar. On the wooded lots off Providence Road and beyond, shade and North Carolina cloud cover starve solar panels sized for sunnier ground. A battery that worked in September fails in February. We size solar gate opener panels and battery banks for Weddington’s tree canopy and winter angle, not a catalog rating.
Pricing for Gate Motor & Opener in Weddington, NC
Here’s what we’re actually quoting on Weddington jobs right now. A standard single swing gate motor replacement runs $900 to $1,800 installed, assuming the existing hinge posts and leaf geometry are sound. Slide motor replacement on a wider entrance runs $1,100 to $2,800. Common repairs such as loop detector replacement, limit switch adjustment, or gear replacement land between $225 and $480. Solar gate opener installation on a rear paddock gate runs $1,200 to $2,600 including panel, battery, and wiring. Every price is quoted and agreed upon before we lift a tool. If we open up the box and find additional work, we stop and tell you what we found and what it costs before doing it. No number changes at the door. That is not how Hal runs a job, and it is not how the 90-Day Done Right Promise starts.
We also make it easier on the front end: no trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Weddington
From our Weddington routes we regularly work in Pineville, Marvin, Wesley Chapel, and Matthews. If you’re a mile over the line on either side, that’s still a local call for us. And if you’re deeper into Union County or up toward the county line, we’ll still come out. The service area is the Weddington region, not a dot on a map.
Serving Weddington, NC - Our Local Coverage Area
We’re based in the Weddington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Weddington
The red clay under Weddington expands when wet and contracts when dry, shifting your hinge post a little more each cycle. Each fraction of an inch makes the motor work harder against a leaf that no longer meets its limit stops. The permanent fix is resetting the post footing and adding a reinforced hinge plate, then recalibrating the operator. Call (877) 610-2993 and we’ll diagnose it on site, free estimate included.
Yes, and it’s one of the more common jobs we do across Weddington’s equestrian properties. A solar gate opener with a properly sized panel and battery runs $1,200 to $2,600 installed, and we wire it to the same keypad or intercom as your front gate. We size the panel for Weddington’s tree shade and winter sun angle, not the brochure rating.
Freezing rain jams Weddington slide gate tracks more than true snow, and the motor overloads trying to push through ice. If the board survived, the next step is sealing the control box properly and considering a low-wattage track heater for winter. If the board fried, we replace it and relocate the box out of direct exposure. Call (877) 610-2993 and we’ll come see what failed.
That is the classic signature of a dying loop detector in the driveway. The detector picks up the larger metal mass of your vehicles but misses lighter axles on a delivery truck or trailer. Replacement in Weddington typically runs $225 to $400, depending on whether we cut and re-seal the loop or replace the detector board only. We’ll have it done same day in most cases.
Automatic gates in Weddington must meet current UL 325 entrapment protection standards, which applies to every new installation and carries over to existing gates when we repair or update the opener. That means monitoring external entrapment devices such as photo eyes or contact edges, and verifying the gate reverses properly on obstruction. We test that on every repair, not just new installs. If your gate lacks working safety edges or photo sensors, we’ll flag it and quote the retrofit. Call (877) 610-2993 for a free assessment.
Need a Gate Motor & Opener in Weddington? Call Us.
If your gate motor is grinding, drifting, solar-dead, or just quit responding at the keypad, call (877) 610-2993. We’ll give you a straight answer and a straight price. If you would rather look a person in the eye, drive to the shop and ask for Hal. The name is on the door, and the truck you’ll see in your driveway is the one he drives. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job, written and signed.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Weddington and the surrounding Piedmont communities since 2001.