Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Weatherford
Gate parts and welding in Weatherford usually means one thing: a heavy gate has stopped swinging square, and something underneath it is failing. Most Weatherford properties aren’t fighting a squeaky hinge on a suburban lot. They’re dealing with 16 to 20 foot pipe gates, expansive clay that won’t hold a post still, and years of field-welded patches that finally gave out. We’ve been fixing exactly that since 2001, and we do the welding on site in your driveway or pasture, not in a shop across town. If your gate is dragging, racked, or the hinges are tearing loose from the post, call (877) 610-2993 and we’ll send someone who knows Weatherford clay when they see it.
Why Weatherford’s Ranch Gates Fail Differently
Go ten minutes east into Fort Worth and a gate repair call is usually a homeowner whose ornamental driveway gate stopped opening. Go west into the 76087 and 76088 ZIP codes and the call sounds different. A 20-foot pipe swing gate has been re-welded three times by ranch hands. The operator keeps faulting after rain. The panel drags in the dirt every summer, even though the hinges look fine. The difference is under the post. Weatherford sits on Parker County’s expansive clay, right where the Cross Timbers and Blackland Prairie meet, and that soil swells and shrinks with every wet-dry cycle. A gate post set in a shallow concrete footing will heave out of plumb seasonally, and when the post moves, the whole gate fights itself: hinges bind, panels drag, and welds crack from stress that has nothing to do with the weld itself. That’s why we start every Weatherford job at the hinge post, not at the obvious crack.
Why Gatewood Fence & Gate Is Weatherford’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is still on the door and on every invoice. Around Weatherford, that means something. People around here have been burned by outfits that quoted one number on the phone and then showed up with another, and that is precisely the kind of work we refuse to do. Our price is agreed before we start, and the 90-Day Done Right Promise comes in writing on every job. If it isn’t done right, one call brings us back. No runaround.
Weatherford customers also get something a national chain can’t offer: accountability with a face. Our crews serve Weatherford locally, and the person who shows up is someone you could run into at the feed store on Palo Pinto Street. We answer our own phone, 24 hours a day, with a live person, not a voicemail tree. That matters when a cattle gate is down at sunset and you’ve got livestock to secure before dark. We are background-checked and uniformed, and we service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Weatherford’s ranch and equestrian properties, that brand coverage means we can fix almost any operator and gate combination without telling you to replace the whole setup.
If you’re in Weatherford and you want to see exactly who you’re hiring, Hal publishes his address and license number. The shop is down the road, not a call center three states away. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Weatherford
Hinge Replacement
Most Weatherford gate sag starts at the hinge post. The clay under Parker County moves enough each season to pull posts a half-inch out of level, which is plenty to bind a hinge and tear the strap bolts loose. We replace worn or bent hinges on pipe ranch gates, ornamental driveway gates, and arena entrances, and we re-set or shim the post so the new hinge isn’t fighting the same old problem. A new hinge on a leaning post is a temporary fix. We fix both.
Post Replacement
The single most common thing we do on Weatherford ranch properties is pull a leaning or rotted hinge post and set a new one in a deeper, properly keyed footing. On 76087 and 76088 acreage, that often means setting a heavy steel pipe post in concrete that goes below the active clay layer, then re-hanging a wide gate so it swings free and level. If the post has been pushed off axis by cattle pressure, we square the whole assembly before the gate goes back up. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Pipe rails crack and buckle over time, especially on wide spans where cattle lean into the gate. Weatherford gates take more animal pressure than almost any suburban gate in DFW, and those old DIY-welded rails eventually tear at the joints. We cut out the cracked or fatigued section, re-square the frame, and weld in solid, full-penetration material that holds. No stacked bead-over-bead patches that snap again next spring when the soil shifts.
Custom Welding
On Weatherford’s working ranches and horse-training facilities, standard off-the-shelf parts often don’t fit what someone built twenty years ago in their shop. We do custom welding on site: building reinforcement braces for cattle-damaged panels, fabricating hinge straps to match an odd post diameter, repairing racked frames on arena gates, and modifying gates to carry operators cleanly. Since we weld in place, the gate stays in your driveway or pasture where it belongs. We don’t haul it away for a week. That’s the whole point of on-site welding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weatherford
We work on Ghost Controls, DoorKing, Linear, and most other major gate operator brands found on Weatherford acreage, including LiftMaster, FAAC, BFT, Viking, Elite, and Mighty Mule. For rural properties, we service solar operators heavily, because many Weatherford gates stand far from grid power and a solar actuator that loses panel charge after a storm is a common call. We keep common parts and welding materials on hand for the operators and gate hardware our Weatherford customers run, which means fewer return trips and less waiting on a part shipped from a warehouse. On this page we’re talking specifically about our Gate Parts & Welding work, and how it applies to the county road and acreage gates around Weatherford.
Common Gate Parts & Welding Problems We See in Weatherford Homes
- Hinge posts heave out of plumb in expansive clay. A gate that dragged every August and swung fine in January is the classic Parker County symptom. The post is moving, not the panel. We re-set the post deeper than the original and re-hang the gate level.
- Cattle pressure racks wide pipe gates out of square. A 16 to 20 foot gate with cattle leaning on it bends over time, and the hinges take the punishment. Old ranch-hand welds crack at the post connection. We cut out the broken beads, re-square the frame, and weld it right.
- Solar gate openers fault after rain and storms. Weatherford sits in the I-20 corridor, so high wind and hail are routine. When a solar operator loses panel charge or the widened gap from soil movement trips the entrapment sensor, the gate won’t close. We diagnose whether it’s the actuator, the panel, or the gate alignment.
- Wide gate spans drop and drag before any weld cracks. On 76087 and 76088 properties built for horse trailers and equipment, 16 to 20 foot spans put enormous leverage on the hinge post. The panel dips, the latch stops lining up, and the operator strains. Weight and span are the real problem, not the hardware on the surface.
Pricing for Gate Parts & Welding in Weatherford, TX
We quote every Weatherford job before any work starts, and that number doesn’t change when we arrive. Here’s what we typically see.
- Hinge replacement: $185 to $420 per gate, depending on hinge count, gate weight, and whether the post needs shimming.
- Post replacement: $340 to $780 for a single steel hinge post set in concrete, including removing the old footing when required. Deep clay work runs toward the top of that range.
- Rail repair or custom welding: $90 to $260 per rail or brace, based on how much cutting, squaring, and material the job actually needs.
- Full gate re-hang and re-square: $450 to $950 for wide ranch gates where we pull the gate, re-foot the post, repair the frame, and re-hang level.
What changes the price in Weatherford is the gate width, post condition, and how much old field welding has to be cut out first. We will never charge you for a part that doesn’t need replacing. Every quote is free, and the 90-Day Done Right Promise applies in writing on every job. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Weatherford
Based out of the DFW metro and serving Weatherford and the surrounding county, our crews also cover Azle, White Settlement, Eagle Mountain, and River Oaks. If your gate is down anywhere in that area, one call brings us out.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Weatherford
Because the problem is under the post, not in the rail. Weatherford’s expansive clay dries and contracts in summer heat, letting the hinge post settle and lean, which drops the gate panel. What you welded is holding fine. The post footing is what failed. We re-set it below the active clay line so it stops moving with the season. Call (877) 610-2993 and we’ll look at the post before we touch a weld.
Yes. That’s one of the most common jobs we do on Weatherford ranches. We cut out the amateur bead welds, re-square the frame with the gate off its hinges, and weld in clean, solid material that actually holds. Where the old hinge straps are burned or cracked, we fabricate new ones to match. We do it on site, in your driveway or pasture.
It’s often both. Wet-dry soil cycles in Parker County shift the hinge post, the gate panel moves off its original path, and the operator’s entrapment sensor reads the obstruction and faults. The fix is usually re-footing or shimming the post, re-hanging the gate, and then re-tuning the operator’s limits. We service the welding and the operator side so you don’t have to call two companies.
Yes. We cut out bent or cracked sections, re-square what’s salvageable, and weld in reinforcement gussets or brace rails that spread the load. If the original pipe is still sound, a full replacement is usually unnecessary. We only replace what actually needs replacing. That’s been our repair-first approach since 2001.
Entrapment protection is the safety system that stops a motorized gate from closing on a person, animal, or vehicle. It includes sensors, reverse mechanisms, and warning devices. Texas follows UL 325 standards for automatic gate safety, and any motorized gate should have functioning entrapment protection. If your ranch gate has a solar operator and the ground has shifted, that protection can trip falsely or fail to work. We check it on every operator service call. Call (877) 610-2993 if your gate has ever reversed or faulted unexpectedly.
Call Gatewood Fence & Gate for Weatherford Gate Parts & Welding
If your gate is dragging, your hinges are pulling out of the post, or you’ve got a wide ranch gate that the operator can’t swing anymore, call (877) 610-2993. We’ll give you a free estimate, we’ll set the price before any work starts, and the 90-Day Done Right Promise comes in writing. Hal Gatewood’s name is on the shop and the shop is down the road. That’s the way it should work in Weatherford.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Weatherford since 2001.