Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Weatherford
If you’re searching for gate installation in Weatherford, TX, you’re likely dealing with a wide span, a heavy gate, or a post that won’t stay put in Parker County clay. A properly installed driveway or ranch gate in Weatherford starts with specing the right operator for the load and setting posts deep enough to survive our wet-dry soil cycles. If you need Weatherford Gate Access Control, we’ll match the system to your property’s demands. Hal Gatewood has been building and hanging gates since 2001, and our crew works these ZIP codes every week. Call (877) 610-2993 and you’ll get a live person, not a voicemail, any hour of the day.
Why Gatewood Fence & Gate Is Weatherford’s Preferred Gate Installation Company
We’re not a franchise rolling through town. Hal Gatewood’s name is on the shop, and the shop is down the road. When we install a gate on a Weatherford property, the person who shows up is someone you may well see again at the feed store or the hardware store. That is the oldest accountability there is, and it matters when you’re trusting someone with a 20-foot steel gate that weighs several hundred pounds.
The work we see in Weatherford is different from what we see in Fort Worth or Granbury. This is horse country. The Cutting Horse Capital of the World means gates here are worked harder, opened wider, and hit by more wind than anything in a suburban cul-de-sac. Our Gate Installation team specs for that reality, not for a generic driveway. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Calls are answered by a live person 24/7, and every tech is background-checked and uniformed. When you call about gate installation in Weatherford, you talk to someone who knows what Tin Top Road looks like, not a call center three states away.
Our Gate Installation Services in Weatherford
We install gates for ranches, horse properties, and residential acreage lots across Weatherford, plus the surrounding areas. Here’s what most people call us for.
Driveway Gate
Driveway gate installation in Weatherford usually means a decorative steel or iron gate at the road entrance, sized to match the property’s look and to handle the wind that comes off open pasture. We set posts in concrete with rebar to anchor against movement, and we always quote the full price before any work starts so the invoice matches the quote when we’re done.
Swing Gate
Swing gates are the most common style we install, and they’re also the ones that fail hardest when posts are set too shallow in our expansive clay. A sag in the hinge post is the first thing we look for. Fix the panel without the post and you’ll fix it twice. We set hinge posts deep, weld on site, and hang the gate square so the operator isn’t fighting gravity from day one. We also handle Gate Parts & Welding - Weatherford jobs that other shops won’t touch.
Sliding Gate
Sliding gates are ideal for Weatherford lots where the driveway slopes uphill from the road or where a swing gate would need to clear a ditch or livestock fence. They ride on a track and rollers instead of pivoting on hinges, which means they’re less affected by post heave. We install cantilever and track-style sliding gates, and we match the operator to the gate’s actual weight and span, not the manufacturer’s best-case number.
Double Gate
Double gates are standard for ranch entrances and horse trailer access. We regularly hang pairs that total 16 to 20 feet across, which is nearly impossible to get right with a light residential operator. We spec heavy-duty actuators that can push that much steel through a Parker County wind event without burning out in a season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weatherford
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. For Weatherford customers, that means we can source parts locally and get repairs done without waiting on a distributor across the state. Most importantly, we’ll tell you honestly when an operator is worth rebuilding versus replacing. Hal fixes what can be fixed. We don’t swap parts that don’t need swapping.
Common Gate Installation Problems We See in Weatherford Homes
- Post lean from expansive clay heave. The Cross Timbers soils around Weatherford swell when wet and shrink when dry, and over a few seasons that cycle walks a hinge post out of plumb. We set new posts 36 to 42 inches deep with rebar and proper drainage so the gate hangs true for years, not months.
- Brittle, re-welded pipe gates from repeated ranch repairs. On the older properties off 76087 and 76088, we see heavy pipe frames that have been field-welded over and over. The metal gets brittle, the frame racks, and the gate binds. We cut out the bad bead welds, re-square the frame, and hang it on posts that are actually plumb.
- Undersized operators on wide livestock gates. A 16-foot pipe gate with a light residential opener is a failure waiting to happen. Wind load and daily trailer traffic burn those actuators out fast. We size the operator for the gate’s real weight and span.
- No power at the gate site. Many ranch entrances in Weatherford are hundreds of feet from the nearest electrical panel. Running mains power is expensive and disruptive. Solar is usually the right answer, and we install solar-powered operators with battery backup and keypad access.
Pricing for Gate Installation in Weatherford, TX
A typical residential driveway gate installation in Weatherford runs $1,800 to $4,500 for a single swing gate with a basic automatic operator, including posts, hinges, and wiring. Double driveway gates and larger ranch gates run $3,500 to $8,000 depending on span, material, and operator rating. A solar package adds $400 to $1,200 depending on panel size and battery storage. If you need an operator-only retrofit on an existing gate, expect $900 to $2,800 including labor and parts. These are real numbers for this market, and every quote is written, itemized, and agreed before we touch anything. Seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Weatherford
Along with our full Gate Installation in Weatherford coverage, we work regularly in Azle, White Settlement, Eagle Mountain, and River Oaks. If you’re on an acreage lot just outside the city limits, you’re still inside our service area. Same local crew, same 90-Day Done Right Promise.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Weatherford
For a 20-foot gate in this area, you need a heavy-duty linear or swing gate operator rated for at least 600 to 1,000 pounds of gate weight, not the lightweight residential models sold for standard driveways. Wide steel pipe gates with livestock hardware weigh far more than ornamental suburban gates, and wind load on a 20-foot span is enormous. We spec operators like the LiftMaster LA500 or Viking heavy-duty swing arm for these jobs, and we always calculate the actual gate weight before recommending anything. Call (877) 610-2993 and we’ll spec it right the first time.
The expansive clay soil around Weatherford heaves when it gets wet and contracts during dry spells, which gradually pushes shallow-set posts out of plumb. A post set only 24 inches deep in this soil will lean within a couple of seasons, especially on a working gate that gets opened and closed daily. We set posts 36 inches deep or deeper, in concrete with rebar, and we often add gravel drainage at the base so water doesn’t pool against the footing. A good post installation fixes the root cause.
Sometimes yes, but only if the frame is sound. An automatic operator clamping onto a racked, brittle, re-welded gate will tear itself apart within months. We’ll inspect the frame, cut out any amateur welds that have made the metal brittle, re-square the gate, and then hang an operator on a gate that’s actually straight. Hal does this work on site, in your driveway, not hauled off to some shop.
If you don’t have mains power within reach of the gate, yes, solar is the practical choice. Running electrical service a thousand feet down a driveway can cost more than the gate operator itself. We install solar panels with battery backups and keypad entry, sized to keep the gate working through cloudy stretches and winter daylight. For a horse property off Tin Top Road or a back pasture entrance, solar is usually the cheapest long-term option. We’ll explain the numbers on a free quote.
Automatic gate systems in Texas should include safety edges or photo eyes that stop and reverse the gate if it encounters a person, animal, or vehicle while closing. On a ranch or horse property, we also recommend a manual release so you can open the gate by hand if the power fails and you need to get a trailer through. Gate openers without proper safety edges are dangerous, especially around kids and livestock. We install them on every automatic gate.
Weatherford’s Cutting Horse Country Demands a Different Kind of Gate
Most gate companies sell the same ornamental driveway package everywhere they go. That doesn’t work in Weatherford. This is the Cutting Horse Capital of the World, and that means a huge share of properties across 76085, 76086, 76087, and 76088 are working equestrian ranches, training facilities, and acreage lots with livestock infrastructure. A gate here isn’t just curb appeal. It’s equipment. It has to hold back a horse, open wide enough for a trailer, and stand up to wind, hail, and clay heave.
That’s why our Gate Installation process starts with the span and the power problem, not with a catalog photo. If you’ve got a 20-foot ranch entrance with no power, we’re specing a heavy-duty operator and a solar package from the start. If you’ve got an ornamental iron gate on a new subdivision lot, we’re still anchoring for Parker County soil, because we know what happens if we don’t. This dual ranch and subdivision reality is unique to Weatherford, and we build every gate accordingly. Show me a gate closing on its own and I’ll show you where it’s failing. Let us set it right.
Call Gatewood Fence & Gate for Your Weatherford Gate Installation
When you’re ready for a gate that’s hung square, powered right, and anchored for this soil, call (877) 610-2993. We’ll give you a written quote with the full price agreed before any work starts, and the 90-Day Done Right Promise in writing on every job. Free estimates, no trip charge inside Parker County, and a permanent 10% discount for seniors and veterans. Hal’s name is on the shop. That’s the only guarantee you’ll ever need.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Weatherford and Parker County since 2001.