Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Sherwood, OR
Gate repair in Sherwood usually costs between $180 and $700, depending on whether we’re fixing a sagging hinge post, replacing a rotted wood frame, or swapping out a failed opener motor. Most repairs here get done the same day we look at them, and you’ll always get a fixed price before any work starts. If your gate is leaning, dragging, or won’t stay latched, call us at (877) 610-2993 and Hal or one of his crew will talk you through what’s actually wrong before anyone even gets in the truck.
We work on the gates Sherwood actually has: the powder-coated aluminum pickets fronting 2000s planned communities, the ornamental iron driveway gates that came with the five-acre estate lots, and the cedar swing gates still hanging on near Old Town. The 97140 zip code is our regular route, and we know which HOAs require satin black versus matte bronze, which subdivisions sit on the worst clay, and why a gate that worked in August won’t latch by February.
Why Sherwood Homes Are Different
Sherwood exploded from roughly 4,000 residents in 1990 to nearly 20,000 by 2010, creating vast swaths of HOA-governed planned subdivisions whose decorative ornamental-iron and vinyl gates were all installed in roughly the same 2000s-2010s window. Those gates are now hitting their first major repair-and-replacement cycle simultaneously, and HOA covenants require any repair or replacement to match the community-specified style, finish, and hardware. That makes material sourcing and aesthetic matching a bigger part of every Sherwood gate job than in older, organically developed neighboring cities like Tualatin.
The housing stock tells the rest of the story. North and east of the historic core, you’ll find two-story Craftsman and Neo-Traditional homes with matching perimeter fences and gates spec’d as ornamental wrought iron or powder-coated aluminum picket styles. Older pockets near downtown have late-1970s to 1980s wood-framed homes where cedar or pressure-treated wood swing gates remain common. Both types are aging into the same wet-climate problems at the same time.
Sherwood sits on the wet western edge of the Willamette Valley, receiving over 40 inches of rain annually with persistent moisture from October through April. This accelerates rust perforation on ornamental iron hardware, swells and rots wood gate posts at grade, and causes the region’s heavy clay soils to heave post footings enough to throw gate alignment off by an inch or more after just a few wet seasons. The Tualatin Valley clay beneath many of Sherwood’s newer subdivisions causes gate posts to shift noticeably after hard winters, meaning a technician called out for a “broken latch” frequently finds the real problem is a footer that has heaved and torqued the entire gate frame out of square. A soil-driven failure mode keeps recurring until the footer is re-poured with a deeper frost footing.
Gate Repair in Sherwood
Gate repair in Sherwood usually falls into one of two categories: a gate that stopped opening, or a gate that won’t stay closed and latched. Most Sherwood calls we take are for gates built between 2000 and 2015, and the fix is often simpler than the homeowner expects. We repair the gate in your driveway, on site, and we quote every price before any work starts. Through our Gate Repair team, we handle everything from hinge posts to control boards.
Hinge & Post Repair
A sagging gate in Sherwood almost never means a bent gate panel. It means a hinge post that’s rotted at grade, or a post pad that’s heaved out of level in the wet Tualatin Valley clay. We fix the post, not just the hinge. Weld a new base plate, sister a steel post inside the old wooden one, or re-pour the footer deeper than the frost line. Fix the panel without the post and you’ll fix it twice. Sherwood homeowners learn that one quick. Typical hinge and post repair in Sherwood runs $220 to $600 depending on whether we’re welding or replacing a footer.
Gate Realignment
When 40-plus inches of rain saturates the ground from October through April, the clay beneath Sherwood’s newer subdivisions expands and contracts. Gate frames get torqued out of square. Latches stop lining up. The gate drags on the strike side. We re-square the frame, shim the hinges, and reset the latch alignment. On gates where the footer keeps moving, we re-pour it with a deeper frost footing so the same problem doesn’t come back next winter. Gate realignment in Sherwood typically runs $150 to $400, and most realignments are done in one visit.
Weld & Rust Repair
Ornamental iron gates all over Sherwood are hitting their first major rust cycle right about now. The powder coating fails at the welded joints first. Water gets in, rust perforates from the inside, and the bottom rail rots through. We weld on site, in your driveway, grinding back the rust, welding in new steel, and re-treating the section. We don’t haul your gate to some shop across town. We fix it where it hangs. Weld and rust repair in Sherwood typically runs $180 to $520 depending on how much steel needs replacing.
Electric Gate Repair
Sherwood’s automatic gates were mostly installed during the 2000s building boom. That means control boards are now 15 to 20 years old. Capacitors dry out, relays stick, and the board simply gives up. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators on site. We can diagnose the board, the motor, the limit switch, or the safety loop in one trip and tell you honestly whether a repair or a retrofit is the better money. Electric gate repair in Sherwood runs $180 to $700 depending on the age of the operator and the part that failed.
Why do Sherwood gates sag even when the panel isn’t damaged?
A sagging gate in Sherwood is almost always a post problem, not a panel problem. The wet winters and heavy clay soil rot wooden posts at grade and heave concrete footings, which throws the whole frame out of square. You fix it at the hinge post and the footer. The gate panel itself is usually fine. If your gate is sagging, call (877) 610-2993 and we’ll diagnose the real cause before quoting.
Can you match my HOA’s required gate finish and hardware?
Yes. We match powder-coated aluminum and wrought iron finishes to Sherwood HOA specifications, and when the original hardware is discontinued, we fabricate a match or find the closest available alternative. We’ll handle the aesthetic compliance so your architectural review doesn’t kick the job back. Call us with your HOA guidelines and we’ll tell you exactly what’s available before you spend a dollar.
Gate Installation in Sherwood
A new driveway gate in Sherwood typically runs $2,800 to $7,400 for a standard single swing installation, depending on the gate width, material, and whether you’re also replacing the opener and posts. Most standard swing gate installs take one to two days once materials are on hand. We schedule Sherwood work throughout the week and we show up in the window we promised. Through our Gate Installation team, we measure, order, and build every gate to outlast the clay soil underneath it.
Driveway Gate Installation
Most Sherwood driveway gates are either ornamental iron or powder-coated aluminum pickets, spec’d to match the rest of the street. We measure the opening, check the fall of the driveway, and spec the gate and post footings for the clay soil underneath. We handle the full install: posts, hinges, gate, opener, safety sensors, and keypad or intercom entry if you want it. A single swing gate install in Sherwood runs $2,800 to $4,800 for a standard 10- to 12-foot opening with powder-coated aluminum and a new operator. Wrought iron runs closer to $4,000 to $7,400.
Sliding Gate Installation
Sliding gates make sense on wider driveways, sloped lots, or anywhere a swing gate would clip a car. Sherwood has plenty of all three. We install cantilever and track-style slide gates, pour the concrete bed and receiver posts right, and set the operator to run with safety edges and photo-eyes that meet current UL 325 requirements. On clay soil, the concrete work is the whole job. Get that wrong and the gate runs fine for a year, then binds. A sliding gate on a concrete bed starts around $5,200 and runs up from there.
Post and Gate Replacement
Sometimes the gate leaf is still good but the posts have heaved beyond saving. We cut out the old posts, pour deeper footings than the original builder did, and re-hang your existing gate square and true. This is common in Sherwood’s 2005-era subdivisions where shallow footings are now failing in the clay. Replacing just posts and re-hanging your existing gate is usually $900 to $2,200. Every quote is written down, agreed to, and signed before any work starts.
My Sherwood HOA requires matching the original ornamental iron gate style. Can you source the exact finish and hardware?
Yes, we do this regularly. We match the picket profile, powder-coat finish, and hinge and latch hardware to your HOA’s approved spec before we order or fabricate anything. Call (877) 610-2993 with your HOA’s design guidelines and we’ll tell you exactly what’s feasible.
Why does my gate keep sagging even after I tighten the hinges?
Because the post is the thing that moved. In Sherwood’s clay, a shallow 2005-era footing will heave and lean a hinge post just enough to drop the gate. Tightening hinges treats the symptom. We re-pour the footing deeper and re-set the post, and the gate stops sagging for good.
Gate Motor & Opener in Sherwood
Gate motor and opener repair in Sherwood usually costs between $240 and $520 for most motor replacements and control board work, and we can have a real person at your gate quickly because our crews work Sherwood daily. If your opener hums but won’t move the gate, or the keypad stopped talking to the motor, call us at (877) 610-2993 and Hal will tell you straight whether it’s a $40 fix or a full replacement. Through our Gate Motor & Opener team, we service every major brand on the market.
Motor Installation
A new gate motor installation in Sherwood typically runs $1,100 to $2,400, including the operator, mounting hardware, and wiring to an existing circuit. In planned communities like Woodhaven and the developments off Edy Road, the installation has to work with the gate you have, not the gate a technician wishes you had. We mount low-profile operators on shared driveways, install loop detectors so the gate holds for exiting cars, and configure safety edges that meet current standards. We quote the full price before any work begins.
Motor Repair
Most Sherwood motor repairs fall between $180 and $420. When a motor binds, a gear strips, or a control board quits, we fix the specific failure rather than convincing you to replace everything. Hal welds on site, which matters when an HOA-matched gate from 2006 has a cracked hinge bracket that no one stocks anymore. In Sherwood, repair is not the cheap alternative. It is usually the right one, and the 90-Day Done Right Promise backs it.
Linear Arm Motors
Linear arm motors are common on Sherwood’s ornamental iron gates, and they carry their own failure pattern here. The wet winters push moisture into the screw drive, and many units come to us with corroded internals after six or seven seasons. A Linear arm motor replacement in Sherwood runs $650 to $1,300 parts and labor. We keep common Linear parts on the trucks that serve Sherwood, so many repairs happen in one visit.
Why does my Sherwood slide gate motor keep burning out after only a few years?
In Sherwood, the usual cause is a sagging gate, not a defective motor. The 2000s-era ornamental iron gates required by most Sherwood HOAs now rust at the hinge posts and drop, which makes the motor draw more current every cycle and burn out its windings. The fix is to repair the sag and realign the gate before installing a new motor. Call (877) 610-2993 and we will inspect the gate, not just swap the motor.
Does Gatewood Fence & Gate service LiftMaster and FAAC slide gate operators in Sherwood?
Yes, we service LiftMaster and FAAC slide gate operators across Sherwood, along with Linear, Viking, Ghost Controls, DoorKing, BFT, Elite, and Mighty Mule. Hal is certified on all nine brands, and we keep LiftMaster and Linear parts stocked on the trucks that serve Sherwood because those two brands dominate the HOA gates here. Call (877) 610-2993 with the model number from your opener and we will tell you if we have the part today.
Gate Access Control in Sherwood
Gate access control repair in Sherwood typically costs $180 to $480 for keypad or remote issues, and we can usually get to Sherwood homes within a day for non-emergency work. If you live in the Villages of Sherwood, Ridges at Sherwood, or any of the HOA-governed neighborhoods off Roy Rogers Road, you already know the drill: the gate has to work, and it has to match what the board approved. Through our Gate Access Control team, we handle every component from keypads to card readers.
Keypad Entry
Keypads fail in Sherwood for two reasons: moisture and moved posts. When rain works into the housing of a DoorKing or LiftMaster keypad mounted on a rusting ornamental post, the contacts corrode and codes stop registering. You can reprogram it, but if the post has heaved from clay soil, the latch will bind and the keypad will get blamed. We test both before we touch a wire. A typical keypad replacement or reprogram in Sherwood runs $150 to $260, including the new unit if needed.
Remote Control & Receiver
Remote controls matter most in gated Sherwood communities where two or three cars are the norm, not the exception. When a homeowner’s remote works at the visitor lane but not the resident lane, the problem is usually a receiver antenna or a loop detector that has corroded from moisture, not the remote itself. We bench-test remotes before we sell you a new one, and we program on the spot for LiftMaster, FAAC, and Linear systems. Remote programming and receiver repair typically runs $90 to $180 for a single-family gate.
Phone Entry & Card Readers
Phone entry systems, especially the ones tied to directory boards at HOA visitor entrances, are the most abused components of a Sherwood gate. People drive up, press the wrong button, and the system has to survive that in the rain for a decade. We replace directory panels, rewire corroded terminal strips, and integrate phone entry with the community’s existing operator. A phone entry repair or panel update in Sherwood usually runs $260 to $480. Card reader repair and replacement in Sherwood typically ranges from $220 to $400.
Does my Sherwood HOA have to approve a new gate access control system?
Yes, in most Sherwood planned communities you need HOA approval before changing the gate access system, because the governing documents usually specify a brand, a finish, and a style for all exterior hardware. The developer set that spec when the neighborhood was built in the 2000s or 2010s, and the board is required to enforce it. We work within that process every week. Call (877) 610-2993 and we’ll walk you through the documentation.
Why does my gate keypad work in summer but fail every winter in Sherwood?
Sherwood’s 40-plus inches of annual rain and persistent October-to-April moisture get into the keypad housing and corrode the contacts, and the failure shows up most on the coldest, wettest days because cold shrinks the metal and the post has likely shifted slightly from clay heave. Two forces converge: moisture inside the keypad, and a post that has moved enough to bind the latch. We replace the keypad with a weather-sealed unit and check the post footing at the same time.
Gate Parts & Welding in Sherwood
Gate parts and welding in Sherwood usually means one of three jobs: a hinge that has torn loose from a powder-coated aluminum picket gate, a slide gate that has started jumping its rack because the rollers seized, or a post that has heaved out of square in Tualatin Valley clay. Hal Gatewood welds on site in your driveway instead of hauling the gate off to some shop. You get a fixed price before he strikes an arc, and the 90-Day Done Right Promise covers every weld. Through our Gate Parts & Welding team, we fabricate, repair, and match finishes on location.
Hinge Replacement
Hinge replacement in Sherwood is rarely just about swapping a bracket. In the 2000s-era planned communities, the decorative aluminum picket gates were installed with steel hinges that rust at the weld point after ten to fifteen years of Willamette Valley rain. We cut the old hinge off, weld a new one on, and match the touch-up finish to what the HOA requires. If the hinge post itself has moved, we address that at the same time, because a gate sags in the hinge post, not in the middle. Hinge replacement on a Sherwood gate usually costs $140 to $320.
Post Replacement
Sherwood sits on heavy Tualatin Valley clay that swells in winter and shrinks in summer. A gate post that was set in 2005 with a shallow footer has had twenty wet seasons to heave, and when it moves even an inch, the latch misses the strike and the gate swings on its own. Post replacement here means cutting the old post, digging past the clay layer, pouring a deeper frost footer, and resetting the gate square. Most post replacements in Sherwood run $380 to $850 for a standard ornamental or wood post.
Rail Repair & Custom Welding
Powder-coated aluminum picket gates corrode where the coating got scratched during the original install, usually right at the hinge post or where the rail meets the uprights. Sherwood gets over 40 inches of rain a year, so water sits in those scratches and rust perforation begins. We cut out the bad section, weld in a matching rail stub, and refinish to the community-specified color. Rail repair on a Sherwood ornamental gate commonly falls between $180 and $460 depending on how far the corrosion has traveled. Some Sherwood gates were spec’d to match a fence that is no longer manufactured, and the HOA still requires the repair to look original. Custom gate welding in Sherwood starts around $220 for a small bracket or gusset and can run $600 to $1,400 for a full panel rebuild.
Why does my swing gate in Sherwood keep coming out of alignment every spring?
The Tualatin Valley clay under Sherwood swells and contracts with the rainy season, and a gate post set shallow will heave enough to throw the latch out of square by more than an inch. The fix is a deeper frost footer, not repeated latch adjustments. We re-pour the post and re-square the gate, then warranty the work. Call (877) 610-2993 and Hal will come look at the footer, not just the latch.
Can you match the ornamental iron finish my HOA requires on a replacement hinge post?
Yes. Sherwood HOAs specify exact powder coat colors and hardware styles, and we match that finish on every weld and every replacement hinge post. We have been matching community specs in Sherwood long enough to keep the color swatches and the powder-coat supplier on file. Get a free quote at (877) 610-2993 before you file an HOA variance you do not need.
Brands We Service in Sherwood
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep Linear and Viking parts stocked on the trucks that run Sherwood regularly, which means most repairs don’t wait on shipping. If your operator is one of these brands, we can diagnose it, repair it, or replace it with a unit that matches your HOA’s spec. See all brands we service.
Pricing for Gate Repair in Sherwood, OR
| Service | Typical Range in Sherwood |
|---|---|
| Basic service call and diagnosis | $75 - $125 |
| Hinge and post repair | $220 - $600 |
| Gate realignment | $150 - $400 |
| Weld and rust repair | $180 - $520 |
| Electric gate repair | $180 - $700 |
| Single swing gate installation | $2,800 - $4,800 |
| Wrought iron gate installation | $4,000 - $7,400 |
| Sliding gate installation | $5,200 and up |
| Post replacement and re-hang | $900 - $2,200 |
| Motor repair | $180 - $420 |
| Motor installation | $1,100 - $2,400 |
| Keypad replacement | $150 - $260 |
What pushes price up in Sherwood: HOA-required finish matching, deeper frost footings in clay soil, and access control integration with legacy systems. What doesn’t change: the price we quote is the price on the invoice. We don’t add trip charges inside the county, and we don’t start work until you’ve approved the number in writing.
Neighborhoods We Serve in Sherwood
We work on gates all over the 97140 zip code, from the newer planned communities north of Chapman Road to the older neighborhoods near Sherwood High School and the historic homes around Old Town. Most non-emergency calls in Sherwood get scheduled within a day or two.
- Creekside - mid-2000s planned community with ornamental aluminum and iron gates now entering their first major repair cycle
- Woodhaven - newer subdivision where clay soil heave has pushed more than a few posts out of square
- Villages of Sherwood - HOA-governed community with shared driveway gates and multi-unit access control
- Ridges at Sherwood - estate lots with ornamental iron driveway gates and longer entry runs
- Old Town and historic core - late-1970s to 1980s wood-framed homes with cedar swing gates
Service Area - Cities Near Sherwood
We run Sherwood regularly from our Portland office, and the same crews that know the clay soil here also work Tualatin, OR, Wilsonville, OR, Newberg, OR, Tigard, OR, and Garden Home-Whitford, OR. If you’re in Sherwood, OR proper, you’re on our main route and we can usually get to you faster than any of the surrounding cities.
Serving Sherwood, OR - Our Local Coverage Area
Gatewood Fence & Gate crews serve Sherwood and the communities around it; dispatch is coordinated from our Portland office. The map shows the Sherwood coverage area; if your address is on it, we can help.
Also serving nearby: Sherwood, OR, Tualatin, OR, Wilsonville, OR, Newberg, OR, Tigard, OR, Garden Home-Whitford, OR.
FAQs About Gate Repair in Sherwood
For urgent issues like a gate that won’t close or secure the property, we typically have a crew in Sherwood the same day. Non-urgent repairs like realignment or finish touch-ups usually get scheduled within one to two days. A live person answers every call, 24 hours a day, so you won’t leave a voicemail and hope.
Most Sherwood planned communities require HOA architectural review for any visible change to a gate, including finish color, hardware style, and access control brand. We work with HOA boards regularly and can supply the documentation, photos, and finish samples they require before work begins.
We cover all of the 97140 zip code, from the rural lots on the west side to the densest planned communities north of Chapman Road. If your driveway is in Sherwood, we service it. Call (877) 610-2993 and we’ll confirm availability and schedule a free estimate.
Call (877) 610-2993 today for a free estimate on any gate repair, installation, or welding job in Sherwood. Hal or a live person will answer, we’ll schedule a time that works, and you’ll get a fixed price before any work starts. Seniors and veterans receive a permanent 10% discount, and we take $40 off any repair over $200. The 90-Day Done Right Promise covers every job in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sherwood Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth