Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sherwood
Gate installation in Sherwood runs between $1,800 and $6,500 for most residential jobs, with automatic driveway gates on the higher end and simpler pedestrian gates on the lower. We’re the local shop that answers the phone with a live person and sends a crew that knows Sherwood’s HOA rules, soil conditions, and the specific gate styles those 2000s-era subdivisions require. If you’re in a Sherwood planned community off Roy Rogers Road or near Sunset Boulevard, you already know the HOA wants the replacement to match the original. That’s exactly the kind of job we handle every week. Call (877) 610-2993 and we’ll come measure, quote a firm price, and never change it on you at the door.
Why Gatewood Fence & Gate Is Sherwood’s Preferred Gate Installation Company
Hal Gatewood has been running this shop since 2001, and his name is on the building, the invoice, and the work. When you call about Gate Installation, you’re talking to the person who will stand behind the finished product. That matters in Sherwood, where a gate job isn’t just about hanging steel. It’s about matching the HOA’s spec, digging a footer in clay that heaves every winter, and making sure the opener talks to the safety photocells. We’ve seen too many Sherwood gates installed by out-of-town crews that didn’t know the soil here. The gate looks fine in July and binds by February.
Sherwood homeowners have dealt with enough phone-tree runarounds. We don’t do that. A live person answers our calls 24/7, including at 10 p.m. on a Sunday when your gate is stuck open and the dog’s eyeing the street. Our Sherwood customers know the response time is measured in hours, not days. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry retrofit boards and safety parts in the truck, not in some warehouse three states over.
Our Gate Installation Services in Sherwood
Swing Gate Installation
Swing gates are the most common style in Sherwood’s HOA subdivisions. They’re the classic ornamental iron or powder-coated aluminum double panels you see at nearly every driveway on Murdock Road and in the newer builds along 99W. The thing about a swing gate in this town is that the hinge post is the whole story. The Tualatin Valley clay heaves post footings after a hard winter, and suddenly the latch won’t close square. We re-pour footings deeper than the frost line, hang the gate straight, and set the opener so it doesn’t fight the frame. A swing gate installed right will sit square for years, even through Sherwood’s wet season.
Double Gate Installation
A double driveway gate in Sherwood means two panels, two hinge posts, and twice the opportunity for misalignment if the original footer was poured too shallow. We see this constantly in the Craftsman-style neighborhoods off Sunset Boulevard where the original gates from the mid-2000s are all hitting the same end-of-life window. When we install a double gate, we level and square both posts independently, hang the panels, then set the close stops so the leaves meet square, not overlapped. If your HOA requires matching spear-top pickets and satin black finish, we source the panels to match. We don’t show up with whatever’s cheapest and call it close enough.
Security Gate Installation
Some Sherwood homeowners want more than curb appeal. They want a gate that actually controls who gets up the driveway. Security gates here are typically heavier gauge steel, with dead-bolted lock bars, anti-lift brackets, and access control like keypads or phone-based entry systems. In Sherwood’s older pockets near the historic downtown core, where lots are wider and homes sit farther back, a well-built security gate closes the visual gap and gives you eyes on the drive before anyone reaches the front door. We weld on site when strengthening is needed, which means the gate never leaves your property.
Pedestrian Gate Installation
Pedestrian gates are the smaller side entries that take constant abuse. They sag, the latch rusts through, the closer stops working. In Sherwood, the 40-plus inches of annual rain means exposed hardware takes a beating from October through April. We install pedestrian gates with powder-coated or galvanized hardware that holds up to the wet, and we set the post deeper than what the original builder thought was enough. If you’ve got a walk gate alongside your driveway gate, we’ll match the picket style and finish so the whole frontage looks like one purposeful install, not a patch job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sherwood
We’re certified to service nine major gate brands, but around Sherwood we see a lot of FAAC operators on the older subdivision entries, BFT boards on mid-2000s swing gates, and Linear actuators on the newer installs along the 99W corridor. We carry retrofit control boards and safety cells for these brands in local stock, so when a board fails during a wet Sherwood winter, we’re not waiting on a backorder. If the original operator is worth retrofitting, we’ll tell you straight. If it’s obsolete and the replacement parts don’t exist anymore, we’ll tell you that too, and we’ll price the replacement both ways so you can see the numbers.
Common Gate Installation Problems We See in Sherwood Homes
- Heaving post footings in Tualatin Valley clay. Sherwood’s heavy clay soils expand and contract with moisture, and after a hard winter the post can shift enough to throw the gate out of square by an inch or more. If someone just “adjusts” the hinges without fixing the footer, the gate will sag again next spring.
- Obsolete control boards on 2000s-era operators. Many Sherwood subdivisions went in around 2005 to 2015, which means the original LiftMaster, FAAC, or BFT boards are now 10 to 20 years old. Sherwood’s damp months accelerate corrosion on board contacts, and we get a lot of calls for gates that won’t open or won’t close, with a board that’s no longer manufactured.
- Rusted hinge posts on ornamental iron gates. Those decorative wrought iron posts look great until the base corrodes below grade and the whole panel starts dragging on the driveway. The panel is often fine. It’s the post connection that’s failing. We weld and sleeve posts on site when the steel is sound enough to save.
- Safety photocell failures on older automatic gates. Gates installed before current UL 325 standards sometimes lack proper photocell or edge safety. We won’t install a new automatic gate in Sherwood without retrofitting safety photocells and, where required, a monitored edge. It’s not optional, and it’s not something to skip to save a few dollars.
Pricing for Gate Installation in Sherwood, OR
Here’s what realistic gate installation costs look like in Sherwood, not some national average that doesn’t account for our clay soil and HOA matching requirements.
- Pedestrian gate installation: $1,800-$3,200, depending on post depth, panel material, and hardware.
- Single swing driveway gate: $2,800-$5,000, including operator mounting and one pair of safety photocells.
- Double swing driveway gate: $4,000-$6,500, including both panels, two post footings re-poured deeper than frost line, and hardware matching Sherwood HOA specs.
- Sliding gate installation: $3,500-$6,000, depending on track length, motor class, and whether we’re converting from an old swing gate.
What moves the number in Sherwood specifically is whether the existing post footings are usable or need to be dug out and re-poured, and whether your HOA requires a specific finish and picket style that has to be special-ordered. We quote the full price before any work starts. You’ll sign off on that number, and that’s the number on the invoice. No trip charge inside Washington County, and the 90-Day Done Right Promise is in writing on every job. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Sherwood
We work throughout Washington County and the surrounding area, including Tualatin, Wilsonville, Newberg, and Tigard. If you’re in one of those neighboring communities, the same upfront pricing and live-answer phone line apply. We coordinate scheduling from our Portland office, but the crew that shows up to your Sherwood driveway lives in the region and knows these neighborhoods, these soils, and these HOAs.
Serving Sherwood, OR - Our Local Coverage Area
We’re based in the Sherwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sherwood
Yes. Sherwood’s planned subdivisions built in the 2000s and 2010s nearly all carry HOA covenants that specify gate style, finish color, and hardware. We document the existing gate before removal, match the picket profile and powder coat color against the HOA’s spec, and source panels that meet it. This is not optional in Sherwood, and we’ve handled enough of these to know the process inside out. Call (877) 610-2993 and tell us your subdivision. Chances are we’ve already matched a gate in it.
In Sherwood it’s almost always the post footing heaving in the Tualatin Valley clay, not the panel failing. The clay expands when saturated, pushes the post out of plumb, and the entire gate frame torques so the latch and opener bind. Replacing hinges or adjusting the operator just masks the problem. The fix is pulling the post, coring the footer deeper, and re-pouring below the frost line. We do this on site, and the difference is a gate that stays square through multiple winters.
If the gate panel and posts are sound, retrofitting the operator is usually the right call. We can replace a failed LiftMaster control board with a currently manufactured retrofit board, add new safety photocells, and keep your existing gate in place. Replacement of the whole gate only makes sense if the panels are rotted or rusted through, or if the post footings have failed to the point where they need re-pouring anyway. We’ll show you the cost both ways and let you decide with real numbers, not pressure. Call (877) 610-2993 and we’ll come assess it free.
Yes, if the driveway layout supports it. Sliding gates need a straight run of fence or wall to slide along, plus a concrete track or cantilever system. Some Sherwood lots have the room, some don’t. We’ll measure the set-back and tell you honestly whether a slide gate will work or whether you’re better off staying with a properly rebuilt swing gate. The conversion includes a new motor, track or cantilever rollers, safety photocells, and matching panels to whatever your HOA requires.
Any new automatic gate installation in Sherwood must meet current UL 325 standards, which means safety photocells covering the full gate path and, on gates with pinch points, a monitored safety edge or equivalent. The operator must also have a manual release accessible from outside, and a warning placard. We install all of these as standard on every automatic gate. If you’re replacing an older gate that predates these requirements, we will not leave the new install without the safety package, regardless of what the original had.
Older Gates Around Sherwood: What Can Be Saved and What Can’t
Sherwood’s gate story is different from older cities like Tualatin because the town didn’t grow organically over a century. It exploded from about 4,000 people in 1990 to nearly 20,000 by 2010, and those new residents moved into HOA-governed planned subdivisions where the ornamental iron and powder-coated aluminum gates were installed in one big wave. That means thousands of Sherwood gates are now reaching the end of their first service life at the same time. Control boards are going. Hinge posts are rusting at the base. Footings are heaving. And the HOA still wants the replacement to match.
What can be saved? A steel post that’s rusted at the surface but still has wall thickness can be welded and sleeved on site. An operator with a dead board can be retrofitted with a current board and a new safety photocell pair. A gate panel that’s slightly out of square can be re-hung after the footing is re-poured. We fix in the driveway, and we don’t recommend replacement when a repair will hold.
What can’t be saved? A post that’s rusted through below grade isn’t structural anymore, no matter how good the welder. An operator whose manufacturer stopped making parts a decade ago is a trap, because you’ll pay for a retrofit that fails again next year. And a gate that was never sized right for the driveway opening will keep binding no matter how many times it’s adjusted. In those cases, replacement is the cheaper answer in the long run. We’ll tell you which case you’re in, and we’ll put the numbers in writing so you can see it for yourself.
One job that sticks with us was a Craftsman-style HOA subdivision off Sunset Boulevard. The original powder-coated aluminum double swing gate had a LiftMaster control board that had failed, and both hinge posts had rusted at the base from over 40 inches of annual rain. The HOA spec required the same satin black finish and spear-top pickets, so we sourced matching panels, re-poured the post footings with a deeper frost footing to stop the Tualatin Valley clay heave, and hung the new gate with a retrofit safety photocell pair to meet UL 325. That gate will outlast the original. That’s the point.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherwood and the surrounding area since 2001.