Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sanger
If a gate is sagging, a roller has seized, or a ranch gate post has worked loose from its footing, Gatewood Fence & Gate can usually have it squared away the same week, often the same day, depending on the part and the weather. Sanger sits at the eastern edge of Fresno County’s ag belt, and the gate work here is different from what you see in suburban Clovis. We’re talking heavy tube-steel ranch gates, wide orchard access gates, older wooden gates on pre-1980 lots near downtown, and hardware that lives through 105°F summers and weeks of winter tule fog. We’ve been at it since 2001, owner-operated the whole time. Call (877) 610-2993 and you’ll get a live person, not a recording or a call center three states away.
Why Gatewood Fence & Gate Is Sanger’s Preferred Gate Parts & Welding Company
Most companies want to sell you a new gate. We’d rather weld the one you have. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to look up. That’s a different kind of accountability. When you call about a hinge replacement on a gate off Bethel Avenue or a post replacement on a ranch road east of town, the person who answers knows Sanger, knows what a bin trailer does to a 16-foot swing gate, and knows what tule fog does to rollers.
Sanger customers tell us the same thing: another outfit quoted one price on the phone and showed up with a different number. We quote our price before work starts and it stays that price. Done. If it isn’t done right, the 90-Day Done Right Promise is in writing on the job, not buried in fine print. One call brings Hal back, no runaround.
Our crews serve Sanger from the Fresno area and know the rural fringes, the older residential core near Jensen and Bethel, and the shared-driveway lots where a swing gate won’t fit. We’ve seen the same posts fail the same way season after season, and we fix the post, not just the panel. Fix the panel without the post and you’ll fix it twice.
Our Gate Parts & Welding Services in Sanger
Here’s what we actually do in Sanger on a regular week. Not a brochure list. The work that comes up on these properties.
Hinge Replacement
Sanger’s older core, the pre-1980 homes near downtown and along Bethel and Jensen Avenues, is full of gates with original hardware that was undersized for the posts the day it was installed. A hinge pin wears, the gate drops, and the latch catches. We replace the hinge with hardware sized for the actual weight of the gate, and we check the post while we’re at it. A sagging gate usually starts at the hinge post, not in the middle.
Post Replacement
This is the repeat call on Sanger’s outskirts. Raisin-grape and citrus operations east and south of town run daily forklift and bin-trailer traffic through driveway gates spanning 14 to 16 feet. A standard residential concrete footing can’t hold up to that. The post rocks loose, the gate sags, the latch misses, and now you’re lifting the gate to close it. We cut out the old footing, set a new post with rebar, and re-plumb it for square. Done right, it stays done.
Rail Repair
Tube-steel rails on ranch gates take a beating from harvest traffic, and older ornamental iron rails near downtown Sanger rust from the inside out. We weld cracks, reinforce weak points, and when a rail is too far gone, we cut it out and weld in new stock. The repair happens on site, in your driveway. We don’t haul the gate off to a shop unless that’s what you want.
Custom Welding
Sometimes off-the-shelf parts don’t fit. A shared driveway gate on an older Sanger lot needs to become a slide gate because there’s no room for a swing. A ranch gate needs a reinforcement plate where the bin trailer keeps clipping it. We carry a mobile welding rig and we’re comfortable with ag-grade welded steel, pipe-frame gates, and residential ornamental iron in the same afternoon.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sanger
We service and stock parts for the operators you’ll actually find on Sanger properties, including Linear, Ghost Controls, and Viking. We’re certified on nine major gate brands, and when a circuit board or limit switch fails on an operator on an ag property, we can usually source the part without sending you through a dealer’s parts desk. We carry common replacement parts locally so a routine roller or hinge job doesn’t wait on shipping.
Common Gate Parts & Welding Problems We See in Sanger Homes
Here’s what we’re actually seeing on gates in the 93657 ZIP:
- Loose hinge-post footings on oversized ranch swing gates. Daily tractor and harvest-equipment passes rock 14 to 16-foot gate posts loose from standard residential footings. This is the single most common repeat repair east and south of Sanger, and it rarely happens in purely residential Clovis.
- Undersized original hardware on pre-1980 residential gates. Homes near downtown and along Bethel and Jensen Avenues often still have the original hinges and latches, sized for a gate half this weight. Hinge and post replacement are common repeat fixes.
- Fog-season rust on rollers and latch hardware. Winter tule fog blankets Sanger for weeks at a time with near-100% humidity. Exposed gate rollers seize, slide gates jam, and manual latches lock up on Sanger’s rural fringes. Post-fog-season corrosion calls are a predictable annual pattern.
- Summer heat throwing gates out of square. San Joaquin Valley summers routinely push above 105°F. Wooden gate frames check and split, and metal hinges expand enough to throw alignment out by season’s end. We see an uptick in sag-correction calls every August and September.
Pricing for Gate Parts & Welding in Sanger, CA
We Also Serve Cities Near Sanger
We take calls in Parlier, Fowler, Reedley, and Clovis too. If you’re on the edge of Sanger and wondering whether you’re in our service area, call. For more on our Gate Parts & Welding team and what we do across the region, visit the service page. And if you’re in Sanger proper, you’re already home.
Serving Sanger, CA - Our Local Coverage Area
We’re based in the Sanger area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sanger
Why do so many Sanger ranch gates need post replacement instead of just hinge repair?
Because the post footing is usually the failure point, not the hinge. Daily forklift and bin-trailer traffic on Sanger’s raisin-grape and citrus properties rocks 14 to 16-foot swing gates until the concrete footing cracks and the post leans. New hinges on a leaning post last a few months. We re-set the post with rebar and proper concrete, then weld the hinge for square alignment. Call (877) 610-2993 for an exact quote on post replacement.
How does winter tule fog affect gate rollers and slide gate hardware in Sanger?
Tule fog saturates exposed metal for weeks. Near-100% humidity accelerates rust on gate rollers, latch hardware, and operator components, especially along Sanger’s rural fringes. Slide gates jam when corroded rollers bind in the track. We replace corroded rollers, clean and lubricate tracks, and swap rusted latch hardware for galvanized or stainless where it makes sense. Call (877) 610-2993 if your slide gate is binding after fog season.
Can a shared driveway gate on Sanger’s older lots be converted from a swing gate to a slide gate?
Yes. Older Sanger lots often have shared driveways and rights of way where a swing gate would block the neighbor’s access or simply won’t fit the setback. We convert swing gates to slide gates with a new track, rollers, and often a new post layout, and we handle the operator if you want it automated. The work is measured, quoted, and scheduled. Call (877) 610-2993 for a free measure and a written price.
What happens to wooden gate frames in Sanger’s 105°F summer heat?
Wooden gate frames check and split in sustained 105°F heat. The wood shrinks, the joints open, and the gate drops out of square. We’ve seen frames near Jensen Avenue split clean through a diagonal brace. Repair usually means re-squaring the frame, adding steel corner brackets, and welding a steel frame reinforcement where the wood is too far gone. Call (877) 610-2993 before the next heat wave.
Are automatic gate operators required to have safety features on Sanger ag properties?
Yes. Automatic gate operators on Sanger ag properties must meet current UL 325 safety standards, which means photo-eye sensors or contact edges that reverse the gate if something is in the way. A moving 16-foot tube-steel gate can seriously injure someone, and safety edges are not optional. We include proper safety edges and photo-eyes on every operator install and retrofit. Call (877) 610-2993 to have yours checked.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sanger since 2001.
Contact Gatewood Fence & Gate
If you’re in Sanger and you need a hinge replaced, a post re-plumbed, or a rail welded, call (877) 610-2993. A live person answers, 24/7. You’ll get a straight quote before any work starts, and you’ll see the same face at your gate that you’d see at the shop. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.