Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Roseville
If your gate in Roseville is sagging, scraping, or the hinges are giving out, you need a shop that welds on site and stocks the parts to match your HOA’s spec. That’s what we do. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still answers his phone like the shop is down the street from your house. For gate parts and welding work anywhere in Roseville, including 95661, 95678, and 95747, call (877) 610-2993 and you’ll get a live person, a straight answer, and a price you can hold us to before anything gets cut or welded.
Why Gatewood Fence & Gate Is Roseville’s Preferred Gate Parts & Welding Company
Roseville isn’t a city where you can swap a gate part with whatever the big box store has on the shelf. The HOA architectural standards in places like West Park, Fiddyment Farm, and Sun City Roseville dictate the hinge style, the post finish, and the weld profile. We’ve been in enough Roseville driveways off Blue Oaks Boulevard and Pleasant Grove Boulevard to know that matching the original spec matters as much as the repair itself.
Every job we do in Roseville carries the 90-Day Done Right Promise, in writing. If a weld cracks or a hinge you paid us to replace doesn’t hold, one call brings Hal back. No runaround, no service ticket, no third party. The name is on the shop and the shop is local to the Sacramento metro, which is the oldest accountability there is.
Our dispatch comes from our Sacramento office, but the crew serving Roseville knows these neighborhoods. We’ve welded gates in 95747 where the same mid-2000s contractor installed identical LiftMaster operators on entire blocks. When you know one community’s hardware quirks, you can often diagnose the next house on the same street before you even pull the panel cover.
Our Gate Parts & Welding Services in Roseville
Hinge Replacement
Hinge replacement in Roseville runs roughly $95 to $285 per hinge, depending on whether it’s a welded steel barrel hinge on a wrought iron swing gate or an adjustable aluminum hinge on a powder-coated pedestrian gate. We cut out the old hinge, grind the post clean, and weld the new one to match the original profile so your HOA has nothing to flag. A gate sags in the hinge post, not in the middle, and that’s where we start.
Post Replacement
For a deteriorated hinge post, Roseville homeowners typically pay $350 to $900, which covers cutting the old post below grade, setting a new one to the original footing depth, and re-welding the hinge tabs. In the 95747 tracts where posts were set during the same construction season, we see the same corrosion pattern house after house. Matching the HOA-approved post style is just part of the job; the other part is making sure the gate doesn’t re-sag in eighteen months.
Rail Repair
Bottom rails on Roseville slide gates take a beating from 105°F summers followed by those 80-degree temperature swings in spring and fall. Rail repair usually runs $180 to $420 when we’re splicing a section, straightening a bowed rail, or re-welding a cracked joint. Fix the panel without addressing the post and you’ll fix it twice. We don’t do that.
Custom Welding
When an off-the-shelf part won’t match what your HOA approved, we fabricate on site. Custom welding in Roseville starts around $150 for small brackets and tabs and goes up from there based on material and finish. We weld in your driveway, not in some shop across town, so you can watch the work and see the color match before it’s painted, not after.
We also handle Gate Parts & Welding for gate rollers, latch and lock repairs, and replacement sections that Rust-Oleum and a YouTube video won’t fix. If it’s steel or aluminum and it’s part of a gate, we’ve probably welded it in Roseville.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roseville
We stock and service parts for Viking, Linear, Ghost Controls, and DoorKing operators, which covers a lot of what Roseville’s HOA communities had installed during the mid-2000s buildout. If you’re on a street in 95747 where every third house has a Viking operator clicking but not opening, we’ve seen it. We keep common boards, capacitors, and limit switches on the truck so we’re not ordering parts and coming back a week later. For most parts and welding repairs in Roseville, the part is in the truck the day Hal shows up.
Common Gate Parts & Welding Problems We See in Roseville Homes
- Hinge post rot at the base: Years of 105°F summer heat cycling and the rare Roseville frost work the post footings loose. A swing gate starts scraping the driveway, and the fix is a new post, not a new gate.
- Cluster operator failures in HOA streets: We’ve seen blocks in 95747 where Viking, DoorKing, and LiftMaster units installed in the same construction season start failing within months of each other. Same circuit board fatigue, same hydraulic seal leaks.
- Weld joint fatigue from temperature swings: Those 80-degree daily spreads in spring and fall flex the weld joints on overhead iron gates. Cracks start at the hinge tabs and top corners, and they only get worse.
- Latch misalignment from settling: When a post shifts even a half inch, the latch and the catch don’t line up. Homeowners think it’s the latch. It’s usually the post, and the HOA wants it fixed to match the original spec.
How Much Does Gate Parts & Welding Cost in Roseville, CA?
Here’s what our Roseville customers can expect, spelled out before we start:
- Hinge replacement: $95-$285 per hinge
- Post replacement: $350-$900 depending on depth and finish
- Rail repair: $180-$420 for splicing, straightening, or re-welding
- Custom welding (small brackets, tabs, hinge repairs): starts around $150
- Service call without a repair: no trip charge inside the county
The price you’re quoted is the price you pay, and we put it in writing before any work starts. No “while we’re in there” extras. Plus, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your Roseville gate.
We Also Serve Cities Near Roseville
If you’re just outside the Roseville line, our crew covers Gate Parts & Welding in Roseville and the surrounding communities, including Rocklin, Citrus Heights, Antelope, and Granite Bay. Same live answer, same written quote, same 90-Day Done Right Promise.
Serving Roseville, CA - Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Roseville
Most Roseville HOAs, especially in 95747 and 95678, require architectural review only for changes to the gate’s color, height, or style, not for repairing the same hinge, post, or weld joint back to its original spec. A repair that matches the original HOA-approved profile is almost always handled as routine maintenance. If your management company does want paperwork, we’ve coordinated with enough Roseville HOA boards to provide a written scope of work and photos to keep the approval moving. Call (877) 610-2993 and we’ll tell you what your specific community is likely to require.
West Park and nearby 95747 communities were built in a concentrated window, often by the same handful of contractors using the same gate operators and the same post-setting methods. Those parts hit the 15-to-25-year mark at roughly the same time, so the circuit boards and weld joints wear out in clusters. It’s not your imagination, and it’s not unique to your house. When one Viking or DoorKing unit on the street shows the failure pattern, the neighbors’ units usually aren’t far behind. Call us and we’ll come look before yours strands you outside the gate.
Yes. We take a sample from your existing gate or a chip from the HOA’s spec, match the RAL or manufacturer code, and powder-coat the new weld or rail section to match. Some colors, especially the dark bronze and black finishes common in 95747 subdivisions, match so closely you won’t be able to tell where the old part ended. We’ve done enough matching work in Roseville to know which vendors get the closest match on pre-finished aluminum and wrought iron. A repair that matches the original won’t draw attention from the architecture committee.
In most Roseville cases, it’s the hinge post, not the gate panel. Posts deteriorate at the base from heat cycling and moisture, and the gate sags because the post leaned. Replacing the post and re-welding the hinge tabs usually brings the gate right back into alignment, and it costs far less than a custom replacement gate. If the panel itself is cracked or rotted through, that’s different, and we’ll tell you straight. But show me a sagging gate with a misaligned latch, and I’ll show you a failing post almost every time.
We coordinate with your property manager or HOA board before we start work on a shared entry or courtyard gate, and we schedule the repair so access is interrupted for the shortest window possible. For most hinge, post, or rail welding, the gate stays functional until the actual cut-and-weld phase, which is usually a few hours, not days. We also reset loop detectors and safety edges after any structural repair so the gate closes correctly and opens for resident keypads and delivery vehicles without triggering an entrapment alarm. If you’re the board member reading this, call us and we’ll outline the full plan, in writing, before anyone shows up.
Call Gatewood Fence & Gate for Gate Parts & Welding in Roseville
If your gate is failing and you want it fixed by someone who will show up, weld it in the driveway, and stand behind it in writing, call Hal at (877) 610-2993. We answer live, 24/7. You’ll get an honest price for the work your gate actually needs, not a commission-driven pitch to sell you a new one. Roseville’s HOA gates are worth more than a one-size-fits-all swap. They deserve repair work that matches the spec, the finish, and the neighborhood. That’s the only kind we do.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Roseville since 2001.