Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Roseville
A new driveway gate or pedestrian gate in Roseville typically runs $3,800 to $9,500 installed, depending on whether it’s a single swing panel or a heavy sliding gate with automation. Most Roseville installations take one to two days once the gate and operator are on hand. We know the terrain, the HOA rulebooks, and the way Roseville’s heat punishes cheap hardware. Call (877) 610-2993 and Hal will size up your entrance honestly, on the first visit.
Roseville isn’t a town of flat little starter-home lots anymore. It’s a city of thousands of HOA-governed subdivisions, acreage entrances off Walerga and Baseline, and long rural driveways where power never quite made it to the gate post. That changes what gets installed, how it gets anchored, and what fails first. We’ve been at this since 2001, and we order the right operator for the gate before we ever dig a hole. When you call, a live person answers, day or night.
Why Gatewood Fence & Gate Is Roseville’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop and on every invoice. That’s not marketing copy. He’ll come out to your property in Roseville himself, walk the gate line, check the setbacks, and tell you straight whether the existing post is worth keeping or whether you’re better off pouring a new one. No faceless crew. No call center three states away. We answer the phone at (877) 610-2993 with a live person, 24/7, and the person who shows up in Roseville was likely the one who took the call.
Roseville homeowners have a particular problem that almost no one talks about, and it’s why our phone rings in clusters. In the newer HOA tracts of 95747, gate operators installed during the mid-2000s building surge are failing together. The same handful of Roseville-area contractors permitted and installed the same Viking and LiftMaster units on dozens of houses in the same construction season. One street might see five or six identical operator failures in a single summer. A technician who learns one community’s hardware quirks can often replicate that fix across a dozen nearly identical neighboring gates. We know those quirks, because we’ve spent 15-plus years undoing them.
Every job, in Roseville or anywhere else we serve, carries our 90-Day Done Right Promise in writing. If it’s not right, we come back. Not a “maybe.” We come back. We also offer a free second opinion on any written estimate, so if another company quoted you something and you want a straight read, we’ll give you one.
Our Gate Installation Services in Roseville
Driveway Gate Installation
Most Roseville driveway gates are either single swing panels on wide subdivision lots or sliding panels built for long, angled driveways. The mistake we see repeatedly is undersized posts. A 12-foot powder-coated steel gate is heavy, and Roseville’s summer heat expands the frame, transferring load straight into the hinge post. We set 4×4 steel posts in concrete 30 inches deep, minimum, and we weld the hinges to the post in your driveway, not at a shop in Sacramento. Your gate stays where you can see it.
Pedestrian Gate Installation
In Sun City Roseville and other Del Webb communities across 95661, pedestrian gates have their own narrower clearances and lower latch heights. HOA standards there often require self-closing hinges and specific hardware finishes that match the community’s original ironwork. We install pedestrian gates that meet those standards, and we don’t show up with a design board and a shrug. If the HOA has a spec, we follow it.
Sliding Gate Installation
Sliding gates are the practical choice for Roseville driveways that slope or run long. A cantilever slide gate rides on rollers and keeps its weight off the driveway. The critical work is the track bed and the operator post. In Roseville’s 95747 acreage pockets and along West Park, we’ve set dozens of slide gates where the original installers poured too shallow a footing, and the first real frost or summer soil shift threw the track out of level. We pour deeper than code. It costs a little more in concrete and it saves a lot more later.
Double Swing Gate Installation
Double swing gates, two panels meeting in the middle, are common on Roseville’s semi-custom lots and equestrian properties where the width exceeds 16 feet. On a double swing, both leaves have to close square and latch under power. Roseville’s 80-degree daily temperature swings in spring and fall fatigue weld joints faster than coastal climates. We weld on site, with the gate lying in your driveway, so the joints are true to the post, not true to a jig in a warehouse.
If you’re wrestling between a slide and a swing, or a solar opener versus running conduit, call (877) 610-2993. Hal will tell you what he’d put on his own place, which is usually the same thing he’ll put on yours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roseville
We install and service operators from FAAC, Linear, Viking, and BFT, and we stock the most common replacement boards, safety edges, and remote kits so Roseville customers aren’t waiting a week on a part. When a heat-baked control board goes down in July, you don’t want to hear “we’ll have to order it.” We keep common FAAC and Viking boards on the truck, because in Roseville, the truck is the parts department.
Certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We use the brand that fits the gate, not the brand we happen to have in the van. Where HOA specs require a particular manufacturer, we source it. Where there’s no power and no trenching budget, we lean solar, and we size the battery for a foggy winter week, not a sunny afternoon.
Common Gate Installation Problems We See in Roseville Homes
- Sprinkler overspray against the hinge post. Years of Roseville landscape irrigation aimed at the gate post causes powder-coated steel to corrode at the base, hidden from view. By the time the gate lists to one side, the post is often paper-thin underground.
- Heat-baked operator circuit boards. Inland heat above 105°F in July and August shortens the life of control boards and hydraulic seals well before manufacturer ratings. We replace them with units rated for the actual thermal load, and we mount them so they breathe.
- Weld fatigue on swing gate panels. Those 80-degree daily temperature swings in spring and fall make metal expand and contract enough to crack welds at the hinge point. The panel looks straight until it starts dragging on the driveway. Fix the panel without the post and you’ll fix it twice.
- Identical operator failures in the same neighborhood. In West Park, Fiddyment Farm, and Crocker Ranch, we see the same Viking slide gate motor grinding, the same LiftMaster board tripping thermal overload, on house after house, because they were all installed by the same crew in 2006. We know the failure before we arrive.
Pricing for Gate Installation in Roseville, CA
Here’s what Roseville gate work actually costs, based on what we’ve installed across 95661, 95678, and 95747 over the last five years. A single driveway swing gate with basic automation typically runs $3,800 to $5,600. A heavier double swing gate, 16 to 20 feet, runs $5,500 to $8,200 with operator. A sliding gate on a steel track bed runs $4,200 to $7,000 without automation, $6,500 to $9,800 with a mid-range operator and safety edges. Pedestrian gate installations run $1,200 to $2,800 depending on width, hardware, and HOA finish requirements. Solar openers add $900 to $1,800 over line-powered units, but they save the cost of a trench run, which in Roseville’s hardpan can run $40 to $60 a foot.
Every price is quoted and agreed before any work starts. You will not get a higher invoice because the ground was harder than we expected. The quote is the price. That’s the whole point of up-front pricing, and it’s why we do free estimates in every community around Roseville, from Sun City to West Park. Call (877) 610-2993 and we’ll come measure, at no charge, and leave a written number on the table.
We also honor a standing $40 off any repair over $200, no trip charge inside Placer County, and a permanent 10% discount for seniors and veterans. You don’t have to ask. We apply it.
We Also Serve Cities Near Roseville
If your gate is in Rocklin, Citrus Heights, Antelope, or Granite Bay, we’re already driving those roads weekly. Our Gate Installation team carries the same parts and the same promise across the county line. And for the full picture of what we do inside the city limits, see Gate Installation in Roseville. One call covers the whole northeastern Sacramento Valley.
Serving Roseville, CA - Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Roseville
In most West Park and Fiddyment Farm subdivisions, replacing an operator on an existing gate requires HOA design review approval, not a city building permit, provided you’re not changing the gate’s footprint or adding a new post. The HOA typically wants a like-for-like operator in the same finish. New gate posts or a header change may require a Placer County permit. We handle the paperwork side we’re allowed to and give you the forms when you need to file. Call (877) 610-2993 and we’ll tell you what your specific community requires.
Yes. We do it regularly off Walerga Road and the wider 95747 acreage pockets where running mains power would mean trenching 300 feet through hardpan. We size a solar panel and deep-cycle battery for the gate’s width and duty cycle, then pair a keypad entry and loop detector so you can open from the cab and let delivery trucks exit automatically. The battery is sized for a foggy winter week, not a sunny afternoon. Call (877) 610-2993 for a free site look.
In Crocker Ranch, the most common source of that grinding is the rack itself, loose or misaligned where the original installer through-drilled into thin wall tube. The teeth skip under load, especially in summer when the track expands. The motor is often still fine. We’ll pull the cover, check the gear train, and show you the rack damage before quoting a repair. Call (877) 610-2993 for an exact diagnosis.
Roseville follows California state code, which requires UL 325 compliant entrapment protection on any automatically operated gate. That means a primary device, usually photo eyes monitoring the gate path, plus a secondary device like an edge sensor or a monitored pressure strip, and constant-contact-to-close operation unless both are present. We install both, every time, on new automation. Call (877) 610-2993 and we’ll walk you through what your gate needs to pass inspection.
Sun City’s pedestrian gates are set for lower clearances and self-closing hinges that meet the community’s Del Webb standards. The hinge post carries a different, constant tension than a driveway post, so we usually spec a smaller-diameter post with a welded self-closing hinge plate, not the heavier 4×4 we’d put on a 12-foot driveway panel. It’s not a smaller job; it’s a different job. Call (877) 610-2993 and we’ll measure it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Roseville since 2001.