Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pompano Beach Highlands
Most gate failures in Pompano Beach Highlands aren’t operator problems. They’re metal problems. Hinge posts rusted into concrete pillars, weld seams cracked by salt air, rails that sag because the post footing gave out years ago. Gatewood Fence & Gate fixes what’s actually broken. We’ve been doing on-site welding and gate repair since 2001, and we work on the older gates most companies won’t touch. If you live in Pompano Beach Highlands and your gate is binding, sagging, or won’t latch, call (877) 610-2993. Hal Gatewood runs this shop, and he still picks up the phone.
Key Takeaways:
- On-site welding means your gate stays in your driveway, not hauled to a shop
- 90-Day Done Right Promise in writing on every job
- Older gates in Pompano Beach Highlands usually fail at the hinge post first
- Free estimates, upfront pricing, no trip charge inside the county
- Live person answers 24/7, not a voicemail
Why Gatewood Fence & Gate Is Pompano Beach Highlands’s Preferred Gate Parts & Welding Company
We know this neighborhood. Pompano Beach Highlands is mostly 1960s and 1970s CBS ranch homes on 60 to 75 foot lots, with original perimeter fencing and surface-mounted swing gates that have been fighting salt air for five decades. That’s a different repair problem than a newer subdivision in Coconut Creek. Hal Gatewood has been welding and repairing gates since 2001. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
When you call, a live person answers. Not a dispatch queue. Not a call center three states away. You’ll talk to someone who knows what a hinge post is and why yours split the concrete pillar. Our Gate Parts & Welding team shows up in uniform, background-checked, and ready to weld on site. Every job carries the 90-Day Done Right Promise in plain writing. If it’s not done right, one call brings Hal back. No runaround.
We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pompano Beach Highlands homeowners, that matters because many of these older operators need retrofits, not replacement. We’ll tell you the difference honestly.
Our Gate Parts & Welding Services in Pompano Beach Highlands
Hinge Replacement
Hinge replacement in Pompano Beach Highlands is rarely just a hinge swap. On the older CBS ranch homes here, surface-mounted hinges have corroded into the original concrete pillars. When we pull a hinge, we often find the post itself is compromised. We replace the hinge, repair the concrete, and weld in reinforcement so the fix holds. A hinge replacement here typically runs $180 to $340, depending on whether the post footing needs work.
Post Replacement
This is the big one in Pompano Beach Highlands. The dense concentration of 1960s and 1970s ranch homes means original gate posts are reaching end-of-life at the same time. Salt-laden onshore breezes accelerate oxidation, and we routinely find posts that have split the concrete pillar they’re set in. Fix the panel without the post and you’ll fix it twice. Post replacement in this neighborhood usually runs $350 to $750, including new concrete footing and welding.
Rail Repair
Rails fail for two reasons here: rust and sag. When a hinge post shifts, the rail takes the load and bends or cracks. We cut out the damaged section, weld in new steel, and re-square the frame. On ornamental iron gates from the 60s and 70s, this can save a gate that looks beyond saving. Rail repair in Pompano Beach Highlands typically costs $150 to $325, depending on the extent of the damage.
Custom Welding
Sometimes the part simply doesn’t exist anymore. Obsolete control board mounts, non-standard hinge plates, latch brackets that were fabricated for a gate installed in 1972. We weld custom parts on site, in your driveway, to match the original. Custom welding jobs in Pompano Beach Highlands start around $120 and go up based on the fabrication involved. If you need a latch and lock welded onto a CBS ranch gate without cracking the concrete pillar, that’s the kind of job we do regularly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach Highlands
We work on all major gate operator brands, but around Pompano Beach Highlands we see a lot of Linear, Viking, and DoorKing units, especially on older sliding and swing gates. We keep common parts for these brands on hand, which means faster turnaround for a neighborhood where gates have been in service for decades. An obsolete Linear control board from the 1990s doesn’t mean you need a whole new operator. Sometimes it’s a $200 board retrofit. We’ll tell you which one makes sense before you spend a dime.
Common Gate Parts & Welding Problems We See in Pompano Beach Highlands Homes
- Hinge post corrosion into concrete pillars: Salt-laden onshore breezes, only 3 to 4 miles from the Atlantic, accelerate rust on original 1960s iron hinges. By the time the gate sags, the post has often split the concrete footing.
- Obsolete control board failures from lightning: Daily afternoon thunderstorms from June through September send voltage surges through older gate operators. Decade-old boards fail, and many homeowners discover the operator was never permitted to begin with.
- Bottom roller corrosion on sliding gates: Standing water along track channels after heavy rains jams and corrodes rollers. The rack and pinion on legacy slide gates takes the abuse.
- Weld seam cracking from water intrusion: South Florida humidity gets into micro-cracks in old welds, expands, and widens them. Gates that were welded decades ago start separating at the seams, especially on the hinge post side.
Pricing for Gate Parts & Welding in Pompano Beach Highlands, FL
Here’s what you can expect in Pompano Beach Highlands:
- Hinge replacement: $180-$340
- Post replacement with new concrete footing: $350-$750
- Rail repair and re-squaring: $150-$325
- Custom welding and fabrication: starts at $120
- Roller and track channel replacement: $140-$280
- Gate latch and lock welding: $95-$220
The price is quoted and agreed before any work starts. Not after. If we find something unexpected when we pull the hinge, we’ll show you, explain the cost, and you decide. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Pompano Beach Highlands
We serve the surrounding communities with the same on-site welding and repair-first approach. If you’re in Lighthouse Point, Deerfield Beach, Pompano Beach, or Coconut Creek, we’ll bring the welder to you. Gate Parts & Welding in Pompano Beach Highlands is our home base for this part of Broward County, but we’re set up to cover the whole area. Dispatch and scheduling are coordinated from our South Florida office, with crews serving Pompano Beach Highlands locally.
Serving Pompano Beach Highlands, FL - Our Local Coverage Area
We’re based in the Pompano Beach Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pompano Beach Highlands
Yes, in most cases we can retrofit a 1970s LiftMaster swing gate operator with modern safety photocells, though the decision comes down to the condition of the control board and the arm assembly. If the board is still responding and the motor has life, adding safety sensors is a practical $250 to $425 fix versus $1,200 to $2,800 for a full operator replacement. Broward County requires safety-reverse sensors on any motorized gate, so if the gate was installed unpermitted, a retrofit gets you compliant. Call (877) 610-2993 and we’ll test the operator before recommending which path makes sense.
The gate sags on the hinge post side because the hinge post itself has shifted or corroded where it enters the concrete footing. Welding can reinforce the hinge plate and buy time, but if the post has split the pillar or rotted below grade, the only honest fix is post replacement with a new concrete footing, typically $350 to $750. In Pompano Beach Highlands, this is the dominant failure mode on original 1960s and 1970s gates. Welding over a failing post is a temporary patch, not a repair. Call us for a free assessment at (877) 610-2993.
No, replacing a hinge post and welding a rail on an existing manual swing gate does not require a Broward County permit. Permits are required for motorized gate operator installation or replacement, not for structural repairs to the gate itself. If you’re also replacing an operator, that needs a permit, and we handle the paperwork as part of the job. We’ll tell you exactly what your specific repair requires before any work starts.
Salt air rust is surface-pitting with flaking that appears on the top and windward side first. Age rust is uniform and follows the entire roller. In Pompano Beach Highlands, you’re almost certainly dealing with salt air, given the onshore breeze pattern. Replace the track channel when it’s bent, deeply pitted, or the rollers no longer sit evenly in the channel. A new roller and track channel job here typically runs $140 to $280. Call (877) 610-2993 and we’ll inspect it for free.
Yes, we can weld a new latch and lock onto your gate without damaging the concrete pillar. We use low-heat welding techniques and place a heat shield between the weld point and the pillar when clearance is tight. On original CBS ranch gates, the pillar is often the only structurally sound piece left, so protecting it is the priority. A latch and lock welding job in Pompano Beach Highlands runs $95 to $220. Estimates are free, and you’ll know the exact price before work begins.
Call Gatewood Fence & Gate for Gate Parts & Welding in Pompano Beach Highlands
If your gate is sagging, seized, or won’t stay latched, don’t wait for the post to split the pillar. The longer a bad hinge post sits in salt air, the more expensive the repair gets. Call (877) 610-2993 for a free estimate. You’ll talk to a live person, get a straight answer, and know exactly what the job costs before we start. Hal Gatewood’s name is on the shop. That’s a promise we intend to keep.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pompano Beach Highlands since 2001.