Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Pompano Beach Highlands
Gate installation in Pompano Beach Highlands, FL typically runs $1,800-$4,600 for a standard single swing driveway gate with a motorized opener, and $3,200-$7,900 for a double swing or sliding gate system. Most jobs on the 1960s and 1970s CBS ranch homes around here also need hinge post replacement and pillar repair, which we handle in the same visit. We know this neighborhood’s houses, its salt air, and its storm seasons. If you’re on NE 40th Street, NE 16th Avenue, or anywhere in the 33064 ZIP, call Hal Gatewood’s crew at (877) 610-2993 for a free in-person measure and a written price before any work starts.
Why Gatewood Fence & Gate Is Pompano Beach Highlands’s Preferred Gate Installation Company
We’ve been installing and repairing gates in this stretch of Broward County long enough to know what these homes throw at us. Most of Pompano Beach Highlands was built between 1960 and 1985, and the original ornamental iron gates hung on surface-mounted hinges have been fighting salt-laden onshore breezes for four or five decades. That’s not a guess. That’s what we see when we pull into a driveway off Sample Road or NE 14th Street and find the hinge post corroded inside the concrete pillar.
Our Gate Installation team stocks parts for the brands most common around here, and Hal answers the phone himself. Not a voicemail, not a call center. A live person, 24/7. Every job comes with the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. We also publish our address and license number for anyone who wants to check who they’re dealing with. In a neighborhood where you still wave at your neighbor at the mailbox, that accountability matters.
Our Gate Installation Services in Pompano Beach Highlands
Driveway Gate Installation
A new driveway gate in Pompano Beach Highlands has to handle wind load, not just look sharp. Solid infill panels catch hurricane gusts like a sail, so we anchor posts into 30-inch-deep footings with rebar cages and set the gate frame to swing or slide without binding when the wind pushes on it. On these 60 to 75 foot lots with concrete driveways, we also account for drainage so the gate track or bottom rollers don’t sit in standing water after a summer downpour.

Swing Gate Installation
Swing gates are the most common setup on Highlands CBS ranch homes, and the most common failure point is the hinge post snapping at the concrete pillar face. We don’t just re-hang a gate on a rotted post. We chip out the old footing, pour new concrete, and set powder-coated aluminum or galvanized steel posts that outlast the original hardware. If your gate sags in the hinge post, that’s where we start.

Sliding Gate Installation
Sliding gates work well on tighter frontages, but in Pompano Beach Highlands they need properly graded track channels. After heavy rain, low-lying tracks flood with standing water and sand, and bottom rollers seize. We install cantilever or V-track sliding gates with sealed rollers and drainage clearance so the gate still moves the morning after a thunderstorm.

Double Gate Installation
Double driveway gates on wider lots give full access without a single massive panel swinging into the street or the landscaping. Hal’s crew installs them with independent hinges, matched openers, and a center drop rod when needed. On a 1972 CBS ranch off NE 40th Street, we replaced a rusted pair of single swing gates with a new LiftMaster-driven double swing gate. The original hinge posts had sheared at the pillar face from decades of salt air and hurricane gusts, so our crew chipped out the old footings, poured new 30-inch footings with rebar cages, and set powder-coated aluminum posts before re-hanging the gates. We also installed safety photocells and a surge suppressor on the opener to prevent lightning-related board failures.

Pedestrian Gate Installation
Pedestrian gates next to the driveway or along a side yard need the same anchoring standard as your main gate. We install self-closing hinges, locking hardware, and frames sized for your existing fence line. If the property has original perimeter fencing still in place, we match the gate style and finish as closely as the current materials allow.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach Highlands
Hal is certified to service and install openers and gate hardware from LiftMaster, FAAC, BFT, and Linear, among others. We keep the most common boards, remotes, and safety sensor kits on the truck for these brands so a trip to Pompano Beach Highlands doesn’t turn into a two-week wait for parts. If you call at 9 AM, we can usually have someone there the same day to assess the job and give you a written price.
Common Gate Installation Problems We See in Pompano Beach Highlands Homes
- Hinge posts snapping at the concrete pillar from wind-driven cyclic loading. Decades of daily salt exposure and intermittent hurricane-force gusts corrode the post inside the footing until it shears. Fix the panel without the post and you’ll fix it twice.
- Spalled and cracked concrete pillars behind corroded hinge anchors. The salt-speckled moisture travels into the concrete and expands the original anchoring hardware. We routinely repair the pillar itself before setting new posts.
- Sliding gate bottom rollers seizing after summer thunderstorms. Standing water along low track channels carries sand and silt into the roller bearings. Proper track drainage and sealed rollers prevent most of these failures.
- Gate operator circuit boards blowing out from lightning-induced voltage surges. Ungrounded perimeter wiring acts like an antenna during summer electrical storms. We install surge suppression and proper grounding on every new opener.
Pricing for Gate Installation in Pompano Beach Highlands, FL
Here’s what homeowners in the 33064 ZIP can expect to pay as of 2026. A single swing driveway gate with opener typically runs $1,800-$4,600 depending on panel material and width. A double swing gate system usually lands between $3,200-$7,900. A sliding gate on a cantilever or V-track setup ranges from $2,900-$6,800. Pedestrian gate installation without an operator starts around $650-$1,400. If the hinge posts or concrete pillars need replacement, add $400-$900 per post for labor and materials. The price we write down is the price you pay, agreed before any work begins. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and no trip charge inside Broward County. Seniors and veterans always get 10% off. Call (877) 610-2993 for a free measure.
We Also Serve Cities Near Pompano Beach Highlands
Our crew regularly handles Gate Installation in Pompano Beach Highlands and the surrounding communities. We cover Lighthouse Point, Deerfield Beach, Pompano Beach, and Coconut Creek, so if your gate sits a few blocks over the city line, the same local pricing and hands-on work still apply.
Serving Pompano Beach Highlands, FL - Our Local Coverage Area
We’re based in the Pompano Beach Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pompano Beach Highlands
Because the hinge post takes the full cyclic load of every gate swing, every wind gust, and every storm season. In this neighborhood’s salt-spray belt, moisture and airborne salt wick into the concrete footing and corrode the steel inside until it fails at the pillar face. A new gate on that rotted post will sag within months. That’s why we quote the post replacement up front. Call (877) 610-2993 for a free inspection of your existing gate hardware.
Yes. Broward County requires a building permit for any motorized gate operator installation or replacement. We see a lot of older Highlands homes where a previous owner skipped this step, leaving an unpermitted opener with no safety-reverse sensors. We handle the permit paperwork on your behalf and bring the install up to code before the new operator goes in. Call us and we’ll walk you through the process.
A solid infill gate in this part of Broward County should be engineered to handle sustained tropical storm-force winds of 50-74 mph with gusts higher. We size posts, footings, hinges, and the opener’s torque capacity for the panel’s wind profile, not just its weight. For a quote that accounts for your specific gate size and material, call (877) 610-2993 for a free on-site measure.
Every motorized gate should have a manual release. Look for a T-handle or keyed release on the operator box or the motor housing. Pull it and the gate should swing or slide freely by hand. If the gate is stuck, don’t force it - call us and we’ll get out to Pompano Beach Highlands to assess whether the track, hinge, or opener is the problem. A live person answers at (877) 610-2993, day or night.
Because low track channels flood during afternoon downpours and carry sand and silt into the roller bearings. Once the water recedes, the grit stays. We install sliding gates with drainage clearance under the track and sealed rollers designed for this exact failure mode. For a long-term fix instead of repeated service calls, call (877) 610-2993.
Contact Gatewood Fence & Gate
If you’re in Pompano Beach Highlands and need a new driveway gate, swing gate, sliding gate, or pedestrian gate, call Hal Gatewood at (877) 610-2993. You’ll get a straight answer, a written price, and no surprises at the door. Dispatch and scheduling are coordinated from our Miami office, and our crew serves Pompano Beach Highlands locally. Estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pompano Beach Highlands since the company’s founding in 2001.





Before
After
Before
After
Before
After