Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Pompano Beach Highlands
If your gate motor stopped working in Pompano Beach Highlands, you’re likely dealing with salt-air corrosion or a lightning-surge fried control board, and we can usually have it diagnosed within a day. We work throughout the 33064 ZIP, including the 1960s and 1970s CBS ranch neighborhoods off Dixie Highway and Atlantic Boulevard, so we know exactly what those older gate posts and operator arms look like after decades of coastal weather. Call (877) 610-2993 and a live person answers, 24/7.
Key Takeaways:
- Motor repair and replacement in Pompano Beach Highlands typically runs $280-$1,600 depending on the operator brand and whether the hinge post also needs work.
- Most calls here come from operator boards fried by afternoon lightning storms, or hinge posts rotted at the concrete pillar.
- Broward County requires a permit for motorized gate operator work, and we walk you through that paperwork rather than skipping it.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
Why Gatewood Fence & Gate Is Pompano Beach Highlands’s Preferred Gate Motor & Opener Company
Hal Gatewood started this shop in 2001, and the name is still on every invoice. When someone in Pompano Beach Highlands calls about a gate that won’t open, the person who shows up is either Hal or a background-checked crew member who knows the difference between a bad capacitor and a hinge post that has rusted through at the footing.
We’ve worked on enough Highlands properties to know the pattern. The house is a single-story CBS ranch from the 1960s or 1970s. The driveway gate is ornamental iron or chain-link on surface-mounted hinges that were never meant to last 50 years this close to the Atlantic. The operator is often a LiftMaster LA400 or an older Linear that somebody installed without a permit and without surge protection. That’s the job. We show up, find the real failure, and fix it rather than quoting you for a full replacement you don’t need. Our Gate Motor & Opener work carries the 90-Day Done Right Promise in writing, and every job starts with a price you approve before we touch a thing.
One more thing worth knowing: we answer the phone with a live person, not a voicemail or an automated menu. Hal publishes his address and license number. You can drive to the shop and look him in the eye if you ever need to. That’s how it’s been since 2001, and it’s not changing.
Our Gate Motor & Opener Services in Pompano Beach Highlands
Here’s what we actually do in Pompano Beach Highlands, and how each service shows up on the kind of gates we see in this ZIP.
Motor Installation
A new operator in Pompano Beach Highlands runs $850-$1,600 installed for most brands, including the control board, arms, safety photocells, and the permit paperwork Broward County requires. We install Viking, LiftMaster, FAAC, BFT, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we’ll recommend the model that matches your gate’s weight and the salt exposure along your specific street. No same-day promise on installation work. We schedule a free measure, give you a written price, and order what’s needed.
Motor Repair
Most motor repairs in Pompano Beach Highlands fall between $280 and $600, and the most common culprit is a control board that got hit by a voltage surge during one of those daily summer storms. We diagnose on site, replace the board or capacitor, and check the wiring for the safety-reverse sensors many unpermitted jobs never had. If your gate opens but struggles, it’s often the arm binding against a sagging post, and that’s a post problem first. We’ll tell you which one it is.
Linear Motor
Linear operators are common on the sliding gates we see back behind the CBS ranches with wider lots along Dixie Highway. A Linear motor repair in Pompano Beach Highlands usually runs $350-$700, depending on whether it’s the board, the gear assembly, or corroded limit switches at the track. The rack and pinion teeth on these systems collect standing water after heavy rain, which accelerates corrosion and binds the gate. We clean, re-lubricate, and replace what’s actually worn.
Slide Motor
Slide gate operators on the larger lots with circular drives need rollers, tracks, and motors that can handle water pooling after a hard afternoon downpour. Slide motor repair here typically runs $400-$900, and we stock bottom rollers and rack sections for the brands we service, which means we’re not waiting a week on a part from a distributor in another state. We’ll also check the chain tension and the stop bars, because a slide gate that over-travels will wreck its own motor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach Highlands
We’re certified to service nine major gate operator brands, and we keep common parts for Viking, Ghost Controls, and DoorKing on the truck when we roll into Pompano Beach Highlands. That means a control board swap or a capacitor replacement often happens the same visit, not after another trip. For Linear and LiftMaster units, we order direct from the manufacturer and usually have the part within two business days. If your opener is a Mighty Mule from a big-box store and it’s giving out, we’ll be honest about whether it’s worth repairing or whether a Viking or DoorKing replacement will survive the salt air better than the one that failed.
Common Gate Motor & Opener Problems We See in Pompano Beach Highlands Homes
- Hinge posts rotted at the concrete pillar: The surface-mounted hinges on those 1960s and 1970s iron gates sit right at the concrete interface, and salt-laden onshore breezes eat through the metal there first. The gate sags, the operator arm binds, and the motor burns out trying to move a gate that no longer hangs square. Fix the panel without the post and you’ll fix it twice.
- Control boards fried by afternoon thunderstorms: South Florida’s daily summer storms send voltage spikes through gate wiring that was never surge-protected, especially on older unpermitted openers. The board dies, the gate won’t respond to the remote, and the homeowner calls us thinking the motor’s shot. Often the motor’s fine. The board is the casualty.
- Standing water in slide gate tracks: After a heavy rain event, water pools in the track channel on low-lying Highlands lots and sits there, corroding bottom rollers and the rack teeth. The gate grinds, jerks, or stops mid-travel. That’s a roller and rack job, and it’s one we do in the driveway rather than hauling the gate off.
- Unpermitted openers with no safety-reverse sensors: Broward County requires a permit for motorized gate operator installation or replacement, and a lot of Highlands gates never got one. That means no photocells, no proper grounding, and a code violation you’d only discover when the gate closes on a car or a person. We fix the wiring and handle the permit paperwork.
Pricing for Gate Motor & Opener in Pompano Beach Highlands, FL
Here are straight numbers for Pompano Beach Highlands, so you know what to expect before you call us.
| Service | Typical Price Range |
|---|---|
| Motor repair (control board, capacitor, wiring) | $280-$600 |
| Slide motor repair (rollers, track, rack) | $400-$900 |
| Linear motor repair (gear, limit switches) | $350-$700 |
| Full motor installation (operator, arms, photocells, permit) | $850-$1,600 |
| Battery backup addition | $350-$750 |
| Intercom or keypad integration | $250-$600 |
Those ranges cover the common jobs we see on the CBS ranch properties across the 33064 ZIP. Softer costs that show up in final quotes include whether the hinge post needs resetting with stainless anchors, whether we’re replacing corroded hinges, and whether your opener needs new safety photocells to meet Broward County code. You’ll get a written quote before any work starts. The price we agree on is the price you pay. We also take $40 off any repair over $200, there’s no trip charge inside the county, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for your free estimate.
We Also Serve Cities Near Pompano Beach Highlands
Our crews run local routes through Pompano Beach Highlands regularly, and we also take calls from Lighthouse Point, Deerfield Beach, Pompano Beach, and Coconut Creek. Same team, same 90-Day Done Right Promise, same live person on the phone when you call.
Serving Pompano Beach Highlands, FL - Our Local Coverage Area
We’re based in the Pompano Beach Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Pompano Beach Highlands
Afternoon thunderstorms send voltage surges through your gate wiring, and the breaker trips because the surge finds ground through the motor windings or the control board. Most Highlands homes with older operators have no surge suppression on the gate circuit, so each storm degrades the board a little more until it fails. We install inline surge protectors and, where the panel allows, a dedicated circuit for the gate operator. Call (877) 610-2993 and we’ll check the grounding and the board the same day we come out.
Yes, if the gate is motorized, Broward County treats any structural work on the hinge post as part of the operator system, which triggers the permit requirement. A non-motorized gate can often be repaired without one, but once an operator is attached, the county wants the whole assembly inspected. We handle the permit paperwork as part of the job, and we’ve helped enough Highlands homeowners get previously unpermitted openers up to code to know exactly what the inspector looks for.
For a gate three to four miles from the Atlantic, we recommend galvanized steel posts set with stainless anchors, or heavy-walled aluminum for gates that can take the lighter post. Painted mild steel, which is what most of those 1960s and 1970s Highlands gates were originally hung on, will corrode at the concrete interface within a few years. We weld and set posts on site, and we use only stainless hardware at the hinge points. A properly spec’d post should get you 20-plus years this close to the ocean.
In most cases, yes. If the motor and gear assembly are still solid, we can tie a keypad, intercom, or phone-based access system into the existing control board without swapping the operator. Viking, DoorKing, and Ghost Controls boards all have expansion terminals for accessory inputs. The job typically runs $250-$600 in Pompano Beach Highlands. We’ll tell you upfront if your existing board is too far gone to integrate, but replacing a board is still cheaper than replacing the whole motor. Call (877) 610-2993 and we’ll look at what you have.
Your solar panel isn’t producing enough during the daily June-through-September cloud cover, and the battery in the operator is draining deeper than it can recharge. South Florida’s rainy season gives you short, intense afternoon storms and heavy cloud cover, which means a panel that worked in the dry winter won’t keep a battery topped off. We install larger panels, add battery backup systems, or run a low-voltage line from the house where the gate is close enough. A battery backup addition in Pompano Beach Highlands runs $350-$750. We’ll size the panel to the gate’s actual draw, not what the kit came with.
What Salt Air in Pompano Beach Highlands Actually Does to Gate Hardware
This is the part that only applies to Pompano Beach Highlands, and it’s the reason we’ve built this page around corrosion instead of just listing services like every other gate company. The Highlands sits three to four miles inland from the Atlantic, close enough that the onshore breeze carries salt that settles on every piece of metal on your property. It’s not dramatic salt spray from breaking waves. It’s fine, persistent salt-laden humidity that works its way into hinge points, weld seams, and the gap where a surface-mounted post meets a concrete pillar.
Here’s what fails first, in order: the hinge post at the footing, the hinge pins themselves, the operator arm connection, the control board ground, and then the board itself. Galvanized steel gives you maybe five to eight years in this environment before the zinc is gone and the steel starts flaking. Painted mild steel gives you two or three. Stainless fasteners and hot-dip galvanized posts are the only things we’ve seen hold up through multiple South Florida hurricane seasons without binding or snapping. The heat and humidity also swell the concrete in those original pillars, cracking the surface around the original hinge anchors and letting water sit against the metal. When we do a motor replacement on an old Highlands gate, we’re usually resetting the post too. A gate sags in the hinge post, not in the middle, and that is where we start.
One job that stays in my head: a 1970s CBS ranch off a concrete driveway in the Highlands, and we pulled a LiftMaster LA400 swing gate operator to replace a burned-out control board. The board was bad, sure. But the surface-mounted hinge post had rotted through at the footing, which is why the gate was binding and why the board was working itself to death. We reset the post with stainless anchors, rebuilt the hinge points, and reinstalled the operator with a new loop detector and safety photocells. Then we walked the owner through Broward County’s permit paperwork so the previously unpermitted opener would finally pass inspection. That’s the standard Highlands job: find the post, fix the post, then make the operator work right.
If you live in Pompano Beach Highlands and your gate motor is failing, don’t let someone sell you an operator swap without checking the post. That’s the sentence I’d want every homeowner in the 33064 ZIP to remember. Call (877) 610-2993 and we’ll come find what actually failed.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pompano Beach Highlands and South Florida since 2001.