Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across McGregor
Gate parts and welding in McGregor usually means one thing: a hinge or post that has finally given out after decades of salt air off the Caloosahatchee River. You can replace the hinge, but if you don’t address the post and the weld points around it, you’ll be calling again in a year. Hal Gatewood and our crew handle gate parts and welding the way McGregor’s older estates actually need them done – on site, with the gate still in your driveway, matched to the original ironwork rather than swapped for something that looks out of place. We answer the phone around the clock at (877) 610-2993, and we’ll give you a straight price before any work starts.
Why Gatewood Fence & Gate Is McGregor’s Preferred Gate Parts & Welding Company
We’ve been handling Gate Installation in McGregor since 2001, and Hal Gatewood’s name is on the shop and every invoice. That’s not a marketing line. It means when you call about a sagging gate on McGregor Boulevard, the person who shows up works for the guy whose name is on the job. Around here, that matters. McGregor homeowners call us because we don’t swap parts that don’t need swapping. We weld what can be saved and replace only what’s truly gone. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Our crew knows the gates along and off McGregor Boulevard specifically. We know the original 1960s ornamental ironwork that shows up on estate properties near the river. We know the hurricane-damaged ranch gates on the larger lots deeper into the 33919 corridor. And we know that a gate that has been binding for a year is never just a hinge problem. You’ll get a real answer about what’s failing and why, not a printed quote with three line items you didn’t ask for.
Our Gate Parts & Welding Services in McGregor
Hinge Replacement
On McGregor Boulevard estates, the bottom hinge is almost always the first casualty. Decades of salt-laden humidity off the Caloosahatchee eats the weld points where the hinge meets the post and the gate leaf. The leaf drops, drags on the driveway, and eventually snaps the hinge barrel or shears the screws. We replace the hinge, but more importantly we rebuild the weld points and reinforce the post mounting so the new hinge isn’t inheriting the same problem. A stock hinge from a big-box store is usually the wrong profile for a custom 1960s gate – we weld in what actually fits.
Post Replacement
We see a lot of cracked post footings on the older McGregor estates. The original steel post was set in concrete decades ago, and brackish moisture has worked its way down over the years. When a swing gate starts leaning hard, the post is usually moving at the base. We dig out the old footing, set a new steel post in fresh concrete, and weld the hinge receivers to match the original gate. If the gate has a McGregor Gate Motor & Opener mounted to that post, we realign the whole thing so the motor isn’t fighting a post that’s out of plumb.
Rail Repair
A bent lower rail on a wide sliding gate changes how the gate rides the rollers, and that wears out the rack and pinion drive teeth fast. We see it on ranch-style lots around McGregor where hurricane debris or a vehicle bump bent the frame. We straighten the rail, re-weld any cracked joints, and check the gate’s travel so the operator isn’t working against itself. If the rack teeth are already worn, we replace that section rather than telling you the whole gate is scrap.
Custom Welding
This is the service that separates a real gate shop from a parts-swapper. On McGregor Boulevard, many of the ornamental gates were fabricated as one-off pieces in the 1960s and 70s. There’s no stock replacement picket, hinge, or scroll that matches. So we weld. We fabricate replacement pickets, rebuild broken scrollwork, and weld custom hinge receivers that match the original profile. The gate stays in your driveway, and the finished repair looks like it belongs to the gate – because it does. Our Gate Parts & Welding team carries welding gear on every truck, not just a box of universal brackets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McGregor
We service and repair operators from Linear, DoorKing, and Ghost Controls, among the nine major brands we’re certified on for Gate Access Control - McGregor. Whether your McGregor estate gate runs on an original swing-arm operator from the 1980s or a newer DoorKing slide operator, we can usually get the parts and the board repaired without ripping out a working system. For older operators that have been discontinued, we often rebuild what’s there rather than forcing a full replacement. We keep common parts on the truck for McGregor calls, which saves you a second trip and another week of waiting.
Common Gate Parts & Welding Problems We See in McGregor Homes
- Salt-air corrosion at the bottom weld points. The Caloosahatchee’s brackish humidity settles on the lowest hinge and weld. The leaf drops, the gate drags, and the damage compounds. We cut out the rusted section and weld in fresh steel, then treat the area so it doesn’t rust out again in two years.
- Seized swing-arm operators from brackish humidity. Those original 1950s-80s operators on McGregor Boulevard estates fail because the motor internals corrode. When someone forces the gate, the custom hinge post takes the brunt and cracks. We repair the operator and the post together, because fixing only one of them guarantees the other fails next.
- Hurricane Ian bent frames and sheared posts. A lot of Lee County gates got knocked out of alignment in 2022, and McGregor was hit hard. Wide slide gate frames on ranch-style lots bent, and continued use without straightening and re-welding breaks the rack and pinion drive teeth. We fix the frame first, then the drive, then the operator’s limits.
- Custom scrollwork with no matching replacement parts. Gates on the older estates were made as individual pieces. A missing picket or broken scroll from a 1967 gate won’t match anything you can order. We fabricate the piece to match the gate’s profile and age it to blend with the surrounding ironwork.
Pricing for Gate Parts & Welding in McGregor, FL
Gate parts and welding prices in McGregor depend on what failed and whether we’re matching custom ironwork. Here’s what you can expect. Hinge replacement on a standard swing gate typically runs $180 to $340 in McGregor, depending on whether we’re welding a new receiver or reinforcing an original 1960s post. Post replacement with a new steel post in concrete runs $450 to $900, more if the gate is a heavy double-leaf with an operator mounted to the post. Custom welding and fabrication has a wider range – a single replacement picket matched to original scrollwork might run $120 to $250, while rebuilding a sagging gate leaf with multiple weld points and realignment lands between $600 and $1,400. Rail repair and re-welding on a driveway gate generally runs $250 to $600. Every price is quoted and agreed before any work starts. You won’t get a bigger number at the door. Call (877) 610-2993 and we’ll give you an honest figure for your specific gate.
We Also Serve Cities Near McGregor
Our Gate Parts & Welding in McGregor work brings us out along McGregor Boulevard and into the surrounding communities regularly. We also serve Cypress Lake, Villas, Iona, and Fort Myers, which means we’re never far from the 33919 corridor. If you’re just outside McGregor’s ZIP and your gate is stuck or sagging, give us a call. We’ll be straight with you about scheduling. We cover all of McGregor and the nearby areas without a trip charge inside the county.
Serving McGregor, FL - Our Local Coverage Area
We’re based in the McGregor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in McGregor
McGregor Boulevard’s estate gates are often one-off custom ironwork from the 1960s and 70s, so a stock replacement hinge simply doesn’t match the original profile. The gate leaf is usually thicker at the mounting point, the picket spacing is custom, and the original hinge was likely welded on rather than bolted. So we cut out the corroded hinge, weld in a new one, and match the surrounding weld points to the gate. That’s the standard repair path here – and it’s why we carry welding gear on every McGregor call. If your gate is drooping or dragging, call (877) 610-2993 and we’ll tell you whether it’s a hinge, a post, or both.
Yes. Long driveways off McGregor Boulevard often have no practical way to run AC power to the gate, so they run on solar-charged battery operators from brands like Ghost Controls. We service the panels, batteries, control boards, and the mechanical drive on solar gate openers, and we can size a replacement panel and battery for your gate’s demand. The salt air here cuts into the wiring connections fast, so we inspect and re-seal every solar connection when we’re on site. Call (877) 610-2993 and Hal will talk you through what you’ve got.
It depends on whether the post itself moved at the concrete footing. Hurricane Ian put a lot of lateral force on McGregor’s swing gates, and many posts cracked at the base or shifted in saturated ground. If the post is still plumb and the footing is solid, we can usually weld-repair the bent hinge mounts and realign the gate. If the post has moved, a new steel post set in concrete is the correct fix – welding the old one back into place only lasts until the next storm or the next hard close. We’ll check the post with a level while the gate is still in place and show you what we’re seeing. Call (877) 610-2993 for a free estimate on the repair either way.
The big two are photocell sensors and a reversing mechanism that stops the gate when it meets resistance. On McGregor Boulevard estates with older operators, we often find that the original photocell was never upgraded when the gate was modernized, or the reversing clutch was rusted into a fixed position. That’s a safety failure, and it’s also how someone gets hurt. We check the photocell alignment, the edge sensors where present, and the force-sensing reversal on every gate we service in McGregor. Our 90-Day Done Right Promise covers the repair, and we’ll show you what we found. Call (877) 610-2993 to schedule a check on your gate.
Yes. That’s exactly the kind of work we do here more than anywhere else. We match the width, thickness, and profile of the original picket, cut and weld it to length, and age the finish so it doesn’t stand out like a new part on an old gate. The gate stays in place, and the finished picket looks like it was always there. We were called to an estate just off McGregor Boulevard where a 1960s ornamental swing gate had sagged badly on its original hinge post. The post footing had cracked from decades of salt-laden humidity off the Caloosahatchee, and the custom scrollwork meant no stock panel could be fitted. Our crew set a new steel post in concrete, welded a custom receiver to match the original picket profile, and realigned the gate operator so the safety photocell and loop detector were back in proper working order. If you need a matching picket or scroll, call (877) 610-2993 and we’ll come measure it in person.
If your McGregor gate is sagging, dragging, or just not closing right, call Hal Gatewood and the crew at Gatewood Fence & Gate. We’ll give you a straight diagnosis and an upfront price, and we’ll stand behind the repair with our 90-Day Done Right Promise. You can reach us 24 hours a day at (877) 610-2993. We’ll answer in person – not a voicemail, not a call center.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving McGregor since 2001.