Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McGregor
A new driveway gate in McGregor typically runs $2,800-$7,500 installed, depending on whether you’re after a single swing, double swing, or sliding design. Most jobs take us two to three days from first measure to final walkthrough, and we quote the full price before any work starts. Hal Gatewood has been doing this since 2001, and the name on the shop is the same name on the invoice. Call (877) 610-2993 and you’ll get a live person who knows McGregor, not a recording.
Why Gatewood Fence & Gate Is McGregor’s Preferred Gate Installation Company
Drive down McGregor Boulevard and you’ll see why we stay busy here. The ornamental iron gates on those older estates weren’t stamped out in a factory. They were made one at a time, often by someone’s uncle with a forge, and every single one is different. We’re the company that welds the original panel back together instead of telling you to replace the whole thing. The 90-Day Done Right Promise is in writing on every job, and one call brings Hal back, no runaround.
McGregor homeowners ask the same thing when they call: “Will you actually show up?” Yes. We’re owner-operated, not a faceless outfit with a rotating crew. The person who measures your gate is the person who installs it, and Hal’s cell number is on the estimate. We’ve been called out to fix work that national companies left half-finished in Cypress Lake and Iona, and it’s the same story every time: the posts weren’t deep enough, or the operator was the wrong size for the panel weight.
Response time to McGregor is usually same day or next morning. We carry enough common parts in the truck that most one-gate jobs are done in one visit. If your old custom iron gate needs a fabricated hinge or a welded repair, we do that on site in your driveway. You don’t wait a week for a part to ship from a warehouse.
Our Gate Installation Services in McGregor
This page is about McGregor specifically. If you want the full breakdown of every gate type we handle, see our main Gate Installation page. Here’s what McGregor homeowners call us for most often.
Driveway Gate
Driveway gates in the 33919 corridor range from older single-swing iron panels to new double-leaf estate gates on heavy operators. We size every operator to the actual panel weight and wind exposure of your lot. A gate that weighs 400 pounds and catches Gulf wind needs a different opener than one tucked behind a hedge line.
Pedestrian Gate
Pedestrian gates get used harder than anything else on the property, and they fail faster in salt air. We build them with stainless hardware and welded corners so the latch doesn’t rust shut in two seasons. If you have a matching ornamental panel, we’ll copy the picket profile so the walk gate looks like it belongs.
Sliding Gate
Sliding gates work well on McGregor lots where a swing gate would block the driveway during the opening arc. They run on a track and rollers that need to be rated for constant humidity. We set the track with proper drainage so standing water doesn’t sit in the channel and rust the rollers.
Swing Gate
Most older McGregor Boulevard homes have swing gates, and the hinge post is where every job stands or falls. A solid infill panel catches wind like a sail, and if the post isn’t set deep enough in that riverbank soil, the gate sags within the first big storm. We over-dig the footing and set the post in concrete that goes below the water table shift line. Then we weld the hinge brackets, not bolt them, so there’s no play.
Double Gate
Double gates are common on the wider estate driveways off McGregor Boulevard. Two panels, two operators, and a center stop that has to line up perfectly every time. We install double gates with synchronized operators so both leaves open and close together without slamming the center post.
Security Gate
Security gates in McGregor often get paired with access control: a keypad, a phone app, or a vehicle sensor. We run the power and low-voltage lines, set the safety photocells, and program the operator so the gate reverses if a car or kid breaks the beam. These are current code requirements, and we don’t skip them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McGregor
We service and install operators from LiftMaster, DoorKing, and Ghost Controls, along with six other major brands. McGregor customers don’t have to wait for parts to ship from Texas or Ohio. We keep common boards, remotes, and safety edges on the truck for all three of those brands, so a repair that needs a board swap can usually be done the same day. If your existing operator is a Viking or Elite from the 2000s, we can often repair it rather than sell you a new one. Hal will tell you straight if the old motor is worth saving or if you’re better off replacing it.
Common Gate Installation Problems We See in McGregor Homes
- Solid infill panels racking in high wind. A solid sheet of aluminum or steel catches Gulf gusts like a wall, and the force goes straight into the hinge post. We see bent posts and twisted frames on McGregor Boulevard regularly, especially after a summer squall line. Starts with the panel, ends with the post.
- Post footings shifting in saturated ground. The soil along the Caloosahatchee holds water. A footing dug to the minimum spec can heave or settle within a year, and the gate starts dragging or the latch won’t catch. We over-dig McGregor footings and set them below the zone that moves.
- Rust through on original ornamental iron. That beautiful 1960s wrought iron has been breathing river salt for 60 years. Hinges seize, pickets rot at the bottom rail, and the latch hardware turns to crumble. On-site welding is often the only way to save the original panel.
- Operators killed by humidity and power surges. Salt-laden air gets inside the motor housing and corrodes circuit boards, and Lee County’s storm-related power flickers take out boards that were already on the edge. A surge protector and a sealed enclosure make a real difference here.
Pricing for Gate Installation in McGregor, FL
A single swing driveway gate in McGregor usually runs $2,800-$4,200 installed, including the operator, posts, and hardware. Double swing gates land between $4,500-$7,500 depending on panel size and whether you want access control. Pedestrian gates are typically $900-$1,800. Sliding gates run $3,500-$6,000. These are real numbers from the work we bid in 33919, not a website estimate generator.
What changes the price: custom fabrication to match original ornamental iron, deeper post footings for riverbank soil, wind-rated panels, and access control hardware. We quote the full price up front, in writing, before any work starts. You’ll never get a call from the gate saying the bill went up. Free estimates on every installation, and if you have a written estimate from another company, we’ll give you a free second opinion.
We Also Serve Cities Near McGregor
If you’re in Cypress Lake, Villas, Iona, or Fort Myers, we cover those areas too. You can read more about what we do across the region on our Gate Installation in McGregor page. Same crew, same phone number, same written promise.
Serving McGregor, FL - Our Local Coverage Area
We’re based in the McGregor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McGregor
McGregor Boulevard sits right along the Caloosahatchee River, where open wind exposure is higher and the soil holds more water than Cape Coral’s sandier, more inland lots. Combine those two factors and a solid infill panel becomes a big lever working against the post every time the wind gusts. We set McGregor hinge posts at a larger diameter and deeper footing, often with a steel core, so the gate survives the same wind load that would loosen a standard post in months. Call (877) 610-2993 and we’ll check your existing posts before they fail.
Saturated soil expands, contracts, and shifts. A gate installed with a shallow footing in wet riverbank ground will sag or bind within a season or two because the post moves vertically. The fix is over-digging the footing, setting the post below the zone that heaves, and allowing proper drainage around the concrete. This is standard practice for us in McGregor, not an upgrade, and it’s why our installations don’t sag the way some inland-template jobs do. Free estimates: (877) 610-2993.
Yes, in most cases we can. The older estates along McGregor Boulevard have gates that were custom-made as one-off pieces, and no stock panel or picket matches the original profile. We weld and fabricate on site to duplicate the scrollwork, picket spacing, and hinge details, so the repaired or replacement section blends with the rest of the entry. It’s slow work and worth doing. Send us a photo or call (877) 610-2993, and Hal will tell you if the original metal is worth saving.
The gate operator has a manual disconnect, usually a small lever or keyed release on the motor housing, that disengages the drive and lets you push the gate open by hand. On most LiftMaster and DoorKing models it’s a pull-down handle; on Ghost Controls it’s a small keyed lock you turn. You won’t need tools. If the gate is heavy or the release is stiff, leave it and call us. After a hurricane, bent panels and damaged operators can pinch or bind unexpectedly, and a jammed gate is safer handled by someone who works with them every day. We’re at (877) 610-2993 around the clock.
Two reasons usually explain it. Older wrought iron has more flex than the thicker aluminum or steel solid panels used in newer gates, so it can absorb a gust and spring back where a newer solid panel either bends or transfers the force into the posts. Second, newer gates are often fabricated with lighter internal framing to keep cost down, and the weak point becomes the panel itself. We recently installed a new double swing gate for an estate off McGregor Boulevard where the original 1970s wrought-iron panels had corroded beyond repair from decades of Caloosahatchee salt air. After Hurricane Ian twisted one hinge post, our crew set a new deeper post footing and fabricated custom hinges to match the original one-off picket profile, then paired it with a LiftMaster operator and fresh safety photocells to bring the entry up to current code. If your gate bent and your neighbor’s didn’t, the difference is in how the panel was built, and we can tell you in one visit. (877) 610-2993.
Call Gatewood Fence & Gate for McGregor Gate Installation
If you need a new gate in McGregor, a repair after the last storm, or just an honest answer about whether your old iron is worth saving, call (877) 610-2993. A live person answers, day or night. Hal will come out, look at your gate, and give you a written price before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving McGregor since 2001.