Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across McGregor
Gate access control installation and repair in McGregor typically runs $425-$2,600 depending on the system. A basic keypad replacement on McGregor Boulevard usually lands between $425 and $750, while a full smart access retrofit with video intercom on one of the older estate gates can reach $2,200-$2,600. Most McGregor jobs are done same week because we keep our trucks stocked for the salt-air failures we know are coming. If your gate won’t open or a keypad has gone dead, call Hal at (877) 610-2993 and you’ll get a live person, not a recording.
We work the McGregor Boulevard corridor constantly. The riverfront estates, the ranch homes off Cypress Lake Drive, the 33919 zip code from College Parkway down to the Caloosahatchee, the whole stretch. We know what salt air does to gate hardware here, and we know which repairs actually hold up instead of failing again in eight months.
Why Gatewood Fence & Gate Is McGregor’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. That matters in a neighborhood like McGregor, where homeowners want to know who’s actually showing up. We’re not a franchise, not a network of subcontractors, and not a call center. The person who answers the phone is the person whose reputation is on the line when the gate goes down.
McGregor customers call us because word travels down the Boulevard. When a neighbor’s Viking keypad gets corroded and we fix it the same afternoon, we hear about three more dead keypads on that street by Friday. That’s how a local shop works. We answer calls 24/7, we show up in the window we promise, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
We also give free second opinions on any written estimate. So if a bigger outfit quoted a full gate replacement and you want a straight answer on whether the existing gate can be salvaged, call us. In McGregor that’s usually the right question, because so many of these older iron gates are one-off custom work that shouldn’t be hauled off for scrap.
Our Gate Access Control Services in McGregor
Keypad Entry
Keypad entry is the thing that fails first on McGregor Boulevard, and it fails for a specific reason: salt-laden humidity off the Caloosahatchee River gets inside the keypad housing and corrodes the small contacts under the buttons. You’ll get intermittent failures, buttons that work in the morning but not after an afternoon thunderstorm rolls through, and eventually a keypad that won’t respond at all. We replace dead McGregor keypads with corrosion-resistant housings and sealed contacts, and we price the work upfront before we touch anything.

Smart Access
McGregor homeowners keep asking whether they can control their gate from a phone, and the answer is yes. Smart access retrofits on these older estate gates work well, but the installation has to account for the existing wiring and the salt exposure. We’ve fitted modern smart controllers to gates that were built when Lyndon Johnson was president, while keeping the original ironwork intact. You get phone-based opening, guest codes you can set and revoke, and activity logs, without replacing a gate that still has decades of life in it.

Video Intercom
Many of the larger McGregor properties sit far enough back from the street that a visitor at the gate can’t be seen from the front door. A video intercom fixes that. When we install one on a McGregor Blvd property, we run the wiring carefully along the existing gate posts, often in conduit that matches the fence line, and we spec cameras with wide dynamic range because the afternoon sun off the river can wash out a cheap lens. You see the delivery driver, you talk to them, you open the gate from your kitchen. It works off WiFi and cell, so no special landline is needed.

Card Reader
Card reader systems on McGregor properties are often the most neglected part of an access control setup, especially on homes that have had staff or frequent vendors for decades. Old proximity card readers fail in salt air faster than other components because the exposed reader face collects ocean-driven moisture. We install sealed, weatherized readers and can issue new cards or fobs while we’re there. If you’ve got a stack of old cards that half-work, we’ll test them, replace what’s failing, and leave you with a system where every card opens the gate on the first tap.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McGregor
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In McGregor, the work skews toward Viking keypads on older estate gates, Linear operators on mid-century swing gates, and DoorKing systems on some of the newer infill builds. We keep common parts for these brands on our trucks, and for older McGregor components that aren’t made anymore, we handle what’s fixable on the spot. The 90-Day Done Right Promise applies to access control repairs same as it applies to a full gate installation, and we never start work without a price you’ve already agreed to.
Common Gate Access Control Problems We See in McGregor Homes
McGregor’s location on the river creates a cluster of access control failures we don’t see inland, and here are the ones we handle most:
- Keypad buttons failing intermittently. The salt air off the Caloosahatchee eats the contacts inside the keypad housing. The keypad works in the morning, stops responding after rain, then works again. We replace with sealed, corrosion-resistant keypads matched to the existing operator.
- Swing gate binding after years of salt exposure. The hinge posts rust at the base, the gate sags, and the operator tries to pull a gate that no longer swings freely. We cut out the rusted post footing, pour new concrete, use stainless hardware, and re-hang the gate before the access control is wired back in.
- Slide gate reversing or stopping mid-cycle. On newer estate homes with rack and pinion slide gates, salt corrodes the steel rack. The loop detector sees the drag and thinks something is in the way, so the gate reverses or faults. We clean and treat the rack, or replace it with a corrosion-rated version.
- Dead access control boards after Hurricane Ian. Storm surge from Ian’s 2022 hit on Lee County left many McGregor operators with circuit boards that pass bench tests but fail under load. When the gate is heavy, pitted, or not perfectly square, a marginal board gives up. We test under load, not on a bench, before we declare a board dead and replace it.
Pricing for Gate Access Control in McGregor, FL
Every job is quoted before any work starts and the price we give is the price you pay. Here’s the honest picture of what McGregor access control work runs:
- Keypad replacement or repair: $425-$750 depending on brand and whether the existing housing can be reused.
- Smart access retrofit: $900-$1,800, including the controller, app setup, and labor.
- Video intercom installation: $950-$2,600, with the higher end for properties needing longer wiring runs or multiple cameras.
- Card reader installation: $650-$1,300, plus cards or fobs at cost.
- Hinge post repair with re-hang: $800-$2,200, which is the work that usually has to happen before a new access control system will function reliably on a McGregor estate gate.
We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near McGregor
If you’re just south or east of McGregor, we cover the full Gate Access Control in McGregor service area plus Cypress Lake, Villas, Iona, and Fort Myers. Crews serving McGregor come in from our South FL metro office, so the same live phone line and the same owner-operated commitment applies to the whole 33919 corridor and the surrounding neighborhoods.
Serving McGregor, FL - Our Local Coverage Area
We’re based in the McGregor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in McGregor
McGregor Boulevard sits directly along the Caloosahatchee River, and the persistent salt-laden humidity there corrodes the small contacts inside keypad housings years faster than the same model installed five miles inland off Daniels Parkway. The failure isn’t the plastic shell or the wiring; it’s the microscopic corrosion on the switch contacts. We replace McGregor keypads with sealed, corrosion-resistant units, and we reapply dielectric grease to the internal contacts as part of the install. Call (877) 610-2993 for an exact quote, and if it’s dead, we can usually be there same day.
Yes. Most 1960s and 1970s ornamental iron gates along McGregor Boulevard were custom fabricated as one-off pieces, so replacing them is never the first move. We integrate modern Viking or LiftMaster smart controllers with the existing gate, using discreet wiring runs and mounting the hardware where it doesn’t break the original lines of the ironwork. If the hinge post is rusted, we repair and re-hang the gate before wiring access control, because a smart controller can’t overcome a bound gate. The price is quoted upfront, and the work carries the 90-Day Done Right Promise.
The likely cause on a McGregor Boulevard slide gate is salt-induced binding on the steel rack. Salt off the river corrodes the rack surface, creates drag, and the loop detector misreads that drag as an obstruction, so the gate reverses or faults mid-cycle. We clean and treat the rack, or replace it with a corrosion-rated rack if it’s too far gone, then recalibrate the operator. Call (877) 610-2993 for a free diagnosis and an exact quote.
By McGregor standards, a swing gate operator from 2015 is often functioning near the end of its reliable life, especially if it’s near the river. Salt air corrodes hinge posts even faster than it wears out electronics, and a 2015 operator that was fine two years ago may now be fighting a gate that has started to bind. We inspect the whole assembly, not just the motor, because in McGregor the operator is usually not the only problem. We quote the repair before starting, and if it’s not worth rebuilding, we’ll tell you straight.
Ian’s storm surge pushed brackish water into many keypad enclosures along McGregor Boulevard, and that corrosion often progresses slowly. The keypad can work for months after the storm, then fail suddenly as the internal contacts finish corroding. A keypad that fails silently while the operator still works is a classic post-Ian McGregor pattern. We replace the keypad with a sealed unit and re-terminate the wiring with waterproof connectors. Call (877) 610-2993 and a live person will get it scheduled.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving McGregor since 2001.





Before
After
Before
After
Before
After