Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Marion
Gate repair in Marion starts with the ground under the gate, not the gate itself. This town sits on Mississippi River alluvial clay that swells every spring and shrinks every summer, which pushes hinge posts out of plumb and cracks welds that were perfectly good when they were laid down. That’s why we begin every Marion job by checking the footing before we touch a hinge or a weld. For a gate that actually stays fixed, call Gatewood Fence & Gate at (877) 610-2993. Hal Gatewood has been at this since 2001, and he’ll tell you straight: a weld is only as good as the soil holding the post under it.
Why Gatewood Fence & Gate Is Marion’s Preferred Gate Parts & Welding Company
Marion homeowners don’t need a company that shows up, swaps a part, and disappears. They need someone who understands why the part failed in the first place. Hal has spent 23 years fixing gates across Crittenden County, and the pattern is consistent: Delta clay moves, posts lean, hinges bind, welds crack. The fix that lasts is the one that addresses the post before the part. That’s the post-first diagnosis we bring to every job in Marion.
When you call (877) 610-2993, a live person answers. Not a voicemail, not a menu tree, not somebody reading a script in another time zone. Hal or one of his crew picks up, and you’ll get a straight answer about when we can be at your place in Marion. We service the entire 72364 ZIP code, from the brick-front subdivisions near the Marion Sports Complex to the older properties out toward the Crittenden County line. If you’ve got a written estimate from another shop, bring it to us for a free second opinion. That’s part of how we do business here.
Our Gate Parts & Welding Services in Marion
Hinge Replacement
Most sagging gates in Marion aren’t sagging because the panel bent. They’re sagging because the hinge post moved. When Delta clay heaves, the post tips a few degrees, the hinge barrels bind, and the gate leaf drops. We replace hinges true to the post, not just to the panel. That means grinding off the old weld, setting the new hinge barrels in line with a plumb post, and welding with the leaf shimmed correctly. In Marion’s subdivisions off Highway 77, we’ve pulled 7-year-old operators apart and found hinge brackets torn loose from posts nobody releveled. The hinge job isn’t just the hinge. It’s the post, the alignment, and the weld all working together.
Post Replacement
Post replacement in Marion is different than it is in hillier parts of Arkansas. Here you’re digging into river clay that grips concrete and heaves it with every wet-dry cycle. We dig the footing to 30 inches, set the new post in concrete, and brace it until it’s cured. Galvanized posts are the standard on this side of the floodplain. Painted steel will rust out in five to seven years, especially with Mid-South humidity. We install posts that stay put, then weld the gate back to them so the whole system works from the ground up.
Rail Repair
Ice storms load gate frames with weight they weren’t built for. Top rails bend, tack welds shear, and ornamental iron driveway gates along Marion’s brick-front streets start showing cracks right at the rail-to-picket joints. We re-weld those joints using solid wire and then brace the rail so it doesn’t pull apart again. On older agricultural chain-link gates along the rural edge of Crittenden County, rail repair often means cutting out the rusted section entirely and welding in fresh steel. We don’t patch a rust hole. We cut it out and replace it.
Custom Welding
A gate that can’t be bought off a shelf needs somebody who can build it. Hal welds on-site in Marion so your gate never leaves your driveway. Custom hinge barrels, custom latch mounts, gate leaf extensions, operator arm reinforcement, you name it. On-site welding means you’re not hauling a 300-pound gate to a shop somewhere for a two-inch weld. We bring the welder, the generator, and the steel. Hal’s name is on the shop and on every invoice, and if the weld isn’t right, the 90-Day Done Right Promise brings him back to fix it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marion
We service and stock parts for the opener brands Marion homeowners actually have. FAAC, BFT, Linear, Viking, LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and Elite. If your gate opener is fighting a post that’s drifted out of plumb, we’ll diagnose that before we blame the motor. Most of the time in Marion, the operator isn’t broken. It’s working exactly as programmed, and the gate geometry has changed underneath it. We keep common parts on the truck for the brands above, which means less waiting around for a part to ship. And if you need something specific ordered, we’ll tell you up front how long that takes.
Common Gate Parts & Welding Problems We See in Marion Homes
- Hinge posts heaving out of plumb: Mississippi River clay expands in spring and shrinks in summer, slowly tipping posts a few degrees every year. The gate binds, the weld cracks, and no hinge swap fixes it until the post is releveled.
- Rusted hinge pins on painted steel: Humid Mid-South air eats painted steel hardware in five to seven years. Galvanized or stainless fixings are the only thing that actually lasts here, especially on iron driveway gates.
- Ice storm damage to top rails and tack welds: A quarter-inch of ice adds hundreds of pounds to a gate frame. Top rails bow, tack welds shear at the pickets, and the gate won’t close right even if the opener still runs.
- Opener arm brackets torn loose from migrated posts: On Marion’s newer subdivisions built over former Delta farmland, posts move even on gates only five to seven years old. The opener slams at the close limit because the arm geometry is off, not because the motor is failing.
Pricing for Gate Parts & Welding in Marion, AR
We Also Serve Cities Near Marion
We’re based right across the river, so Marion gets the same service as everywhere else we work. West Memphis is part of our regular route too. If you’re anywhere in Crittenden County, call (877) 610-2993 and we’ll be there. For a full explanation of how we approach hinge, post, rail, and welding work, see our Gate Parts & Welding page.
Serving Marion, AR - Our Local Coverage Area
We’re based in the Marion area and offer Gate Installation in Marion, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Marion
Why does my Marion gate keep sagging even after I straighten the panel?
Because the panel was never the problem. The hinge post under it moved. Marion sits on Mississippi River alluvial clay that heaves and shrinks with every Delta rain cycle, and that motion tips posts out of plumb a little more each year. Straighten the panel without releveling the post and you’ll be straightening it again next spring. Call (877) 610-2993 and we’ll check the footing first.
Do I need stainless steel hardware on a gate near the Mississippi River floodplain?
On hinges, latches, and operator arm fixings, yes. The humidity here will rust painted steel hardware in five to seven years. Galvanized or stainless is the only hardware that lasts on this side of the river. We stock stainless fixings on the truck for exactly this reason. Call (877) 610-2993 and we’ll quote stainless at the same visit.
My automatic gate opener works but the gate bangs at the close limit. Is that a welding problem?
It usually is, but not the way you think. The hinge post has migrated, which changes the arc the gate travels through. The opener is closing the gate along the arc it thinks it should have, and the gate hits the stop hard because the geometry is wrong. We relevel the post, re-weld the hinge barrels true, then reset the opener travel limits. Call (877) 610-2993 and we’ll diagnose it on site.
Can you weld a new hinge onto a rusted ornamental iron gate post in Marion?
Usually, yes, but the rusted metal has to be cut back to solid steel first. We grind the area clean, weld a new hinge barrel onto sound metal, and then treat the repair so it doesn’t become the next rust point. If the post itself is too far gone, we’ll tell you that straight and quote a replacement. Call (877) 610-2993 and Hal will look at the steel before he tells you what it needs.
How do I know my gate’s safety photocells are working in Marion’s humid climate?
Block one photocell with your hand while the gate is closing. It should stop and reverse immediately. In Marion’s humidity, corrosion on the photocell connectors is the most common cause of intermittent failure, so if the gate doesn’t reverse, the issue is often the wiring, not the sensor itself. Call (877) 610-2993 and we’ll test both cells and clean or replace the connections as needed.
Your Gate Needs More Than a Part. It Needs a Diagnosis.
Most gate repair in Marion fails because somebody swapped a part without looking at the ground under the gate. We don’t do that here. On a brick-front subdivision street off Highway 77, our tech pulled a 7-year-old LiftMaster swing gate operator where the arm bracket had torn loose from a migrated hinge post. We dug out the post footing to 30 inches, set a new galvanized post in concrete, re-welded the hinge barrels true, then reinstalled the operator rack and pinion with fresh stainless fixings before re-setting travel limits. That’s the whole job, and that’s why it held.
The name is on the shop, and the shop answers the phone. For a free estimate on any hinge, post, rail, or custom welding job in Marion, call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marion since 2001.