Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Memphis
When a gate post heaves out of plumb or a hinge weld cracks, West Memphis homeowners need someone who understands the ground beneath their feet. We do. Gatewood Fence & Gate has been repairing, welding, and re-hanging gates since 2001, and the buckled gumbo clay that shifts post footings every spring is a problem we solve week after week in the 72301 and 72303 ZIP codes. For new setups, see our Gate Installation - West Memphis. Call us at (877) 610-2993 and you’ll get Hal or one of his crew on the line, not a recording. We’ll have someone out to your property, and the price gets agreed on before any torch is lit.
Why Gatewood Fence & Gate Is West Memphis’s Preferred Gate Parts & Welding Company
Around here, a handshake still means something. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road, not three states away. When a West Memphis homeowner calls about a sagging chain-link gate near the I-55/I-40 interchange, the person who answers knows exactly what that soil does after a week of rain. We’re not reading from a script. We’ve reset posts in the older neighborhoods closer to the river, re-hung gates on mid-century homes near the high school, and welded rusted hinges on properties all through the floodplain. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
We hear the same story over and over: a homeowner called a company that quoted one price over the phone and showed up with a different number. That’s not how we work. The price is quoted and agreed before any work starts. We offer $40 off any repair over $200, no trip charge inside Crittenden County, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. A live person answers our phone 24 hours a day, seven days a week.
Our Gate Parts & Welding Services in West Memphis
Most gate failures in West Memphis come down to three things: the post moved, the hinge gave out, or the weld cracked. Here’s how we handle each one. These are the top four services we perform for homeowners in West Memphis:
Hinge Replacement
On a chain-link gate, the hinges are the first thing to go when the post starts leaning. We cut off the old hinge, grind the post clean, and weld on a new bracket that’s set for the gate’s actual swing arc, not whatever the factory assumed. In West Memphis’s humidity, we use sealed bearing hinges on heavier gates so the pivot doesn’t rust solid within two years. If the post itself has moved, we address that first. Fix the panel without the post and you’ll fix it twice.
Post Replacement
The buckshot clay under West Memphis swells when saturated and shrinks when dry, and it does not let a post sit still. We dig out the old footing, set a new post deeper, and use a concrete mix that can handle the movement. For a chain-link gate post near standing water, we’ll sometimes set it in a wider footing with more mass below grade. After a week of standing water near the I-55/I-40 interchange, a homeowner’s chain-link swing gate wouldn’t close because the hinge post had leaned outward. Our tech dug down to the post footing, found the clay fully saturated and the concrete cracked, and reset the post in a deeper footing before welding new hinge brackets and re-hanging the gate so it swung true. That’s the kind of job we do regularly here.
Rail Repair
When a top rail or bottom rail rusts through or bends, the gate loses its shape and starts dragging. We cut out the bad section and weld in a new rail, then re-align the frame so the gate hangs square. On older 1940s-to-1970s homes in West Memphis where chain-link has been up for decades, the bottom rail near the latch side is often rotted from constant ground moisture. We repair the rail and re-sleeve it where it meets the post so the repair lasts.
Custom Welding
We weld on site. The gate stays in your driveway. Hal or one of his crew brings the rig out, sets up, and handles the work right there, whether it’s a cracked hinge weld, a broken frame corner, or a latch that tore loose. If you have a heavier gate with a solid infill panel, we can weld gussets at the hinge post connection so storm winds stop flexing the frame. We don’t haul your gate off unless it’s truly beyond saving, and even then, we’ll tell you straight before we touch it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Memphis
We’re certified to service nine major gate brands, and we stock parts for the ones West Memphis homeowners actually have: FAAC, BFT, Linear, and Viking among them. If you’re looking for our Gate Motor & Opener in West Memphis, we can help. If your opener is from any of those, we can bring the right board, arm, or limit switch with us on the first trip. When a part isn’t on the truck, we source it fast so you’re not waiting a week. Call (877) 610-2993 and tell us what you’ve got. Live person, every time.
Common Gate Parts & Welding Problems We See in West Memphis Homes
Here’s what we find when we pull up to a gate repair call in West Memphis, in the order we find it:
- Post lean from saturated gumbo clay. The alluvial soil under West Memphis swells so aggressively after spring rain that gate posts often heave outward a full inch. The gate that swung fine in October won’t latch by April because the clay pushed the post out.
- Weld cracks from wind on solid infill gates. A solid wood or vinyl gate catches wind like a sail. Every storm front flexes the hinge welds until they crack. We see this constantly on larger gates in West Memphis’s open lots.
- Rusted hinge pivots from humidity and standing water. The Mississippi River bottomland keeps everything damp. Sealed bearing hinges and periodic greasing help, but when a pivot rusts through, it’s a cut-and-weld repair.
- Ground-level frame rot on chain-link gates. The bottom rail and hinge-side frame section sit in moisture year-round. We rebuild these sections with fresh steel and weld them back into the existing structure rather than replacing the whole gate.
Pricing for Gate Parts & Welding in West Memphis, AR
Here’s what you can expect to pay for gate parts and welding work in West Memphis. A hinge replacement on a chain-link gate typically runs $150 to $300 per hinge, depending on post condition. A post reset with deeper footing and re-welding runs $250 to $500. Rail repair falls between $120 and $350, depending on how much steel needs replacing. Custom welding jobs start around $100 for a simple crack repair and go up from there for frame rebuilds and gusset work. What affects the price: how deep the post has to go, whether the clay is saturated, and how much rust we’re cutting out before the weld. The price gets quoted and agreed before any work starts. We’ll come out for a free estimate, and there’s no trip charge inside Crittenden County. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near West Memphis
We work all over Crittenden County, and West Memphis is home base for a lot of it. If you live in Marion or the surrounding county, our Gate Parts & Welding team can be out to your property as well. Same phone, same pricing, same 90-Day Done Right Promise in writing.
Serving West Memphis, AR - Our Local Coverage Area
We’re based in the West Memphis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Memphis
Your post is sitting in alluvial buckshot clay that swells when the water table rises and shrinks during dry spells. Every spring, the saturated clay pushes the post outward, sometimes a full inch. The fix is resetting the post in a deeper footing that sits below the most active swelling zone. Call (877) 610-2993 and we’ll dig it up, check the footing, and reset it so the gate swings true.
Yes, in most cases. We grind the rust off the post, assess the remaining wall thickness, and weld a new hinge bracket onto solid steel. If the post is rusted through or has moved, we’ll tell you straight before doing the weld. We never pad a repair into a job that needs a post replacement.
Most automatic gate openers have a manual release lever or key on the operator. Locate the release, disengage the operator from the gate, and push the gate open by hand. Once power returns, re-engage the operator. If your opener doesn’t have an obvious release, call us at (877) 610-2993 and we’ll walk you through it or come out and handle it.
Absolutely. A solid wood or vinyl gate catches wind and flexes at the hinge post connection. Over repeated storm fronts, that flexing cracks the weld. We’ve repaired dozens of these in West Memphis after severe weather. Adding gussets or a sturdier hinge bracket at the post connection stops the flex.
It’s usually both. The hinge post has moved or the hinges have worn, and the gate is dragging at the latch. We check the post plumb first, then the hinge wear. A gate sags in the hinge post, not in the middle, and that’s where we start. Call for a free estimate and we’ll quote the fix before any work starts.
Call Gatewood Fence & Gate for Gate Parts & Welding in West Memphis
If your gate won’t close, your post is leaning, or a weld cracked after the last storm, call (877) 610-2993. We’ll quote the price up front, do the work in your driveway, and stand behind it for 90 days in writing. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Memphis since 2001.