Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Leander
Gate parts and welding in Leander usually mean one of two things: your gate is sagging, dragging, or stuck, or you’re facing an HOA architectural committee that wants the repair done to an exact spec. We handle both. Gatewood Fence & Gate has been fixing gates since 2001, and we do the welding on site, in your driveway, not hauled back to some shop. If you’re in the 78641, 78645, or 78646 zip codes, we can usually have someone out to give you a straight answer within a day. Call (877) 610-2993 and you’ll get a live person, not a recording.
What surprises people about Leander is how fast the gate problems show up. A builder-installed gate in Crystal Falls or Travisso that went in five years ago can already have cracked post footings or a hinge that’s pulling loose. The ground moves in Williamson County. So do the gates. We’ll tell you what’s actually wrong, weld it right, and back the work with our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Leander’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and his name is still on the shop. We’re not a franchise and we’re not a call center. When you call about a gate in Leander, you’re talking to someone who knows the difference between a gate that sags because the hinge post moved and one that sags because the hinge itself wore out. Those are two different repairs, and fixing the wrong one means you’ll be calling us again in six months.
We’ve worked in Leander long enough to know the communities: Crystal Falls, Travisso, Bryson, Sage Creek, and the older streets off Bagdad Road and West Whitestone Boulevard. We know which builders used which gate hardware. We know what the HOA committees in Crystal Falls expect for powder-coat matching and iron profile. That local knowledge matters, because a gate repair that passes inspection on the first walkthrough is a repair you don’t have to redo. And we do not want to redo work. Neither do you.
Every job we do in Leander carries the 90-Day Done Right Promise, written on the invoice. If something’s not done right, one call brings us back. No runaround. You can reach a live person 24 hours a day, which matters when a gate motor fails on a Friday evening and your driveway is blocked.
Our Gate Parts & Welding Services in Leander
Here’s what we actually spend our time on in Leander. If your problem isn’t on this list, call anyway. We’ll tell you honestly whether it’s something we fix or something a different specialist should handle.
Hinge Replacement
Hinges on ornamental iron gates in Leander take a beating. The weight of a 300-pound swing gate combined with the clay movement underneath means hinge welds crack and hinge pins bend. We cut out the old hinge, weld in a new one on site, and grind and finish the repair so it matches the surrounding iron. In HOA communities like Travisso, we match the existing finish before we even start, because we know the walkthrough is coming.
Post Replacement
This is the big one for Leander. The Vertisol clay under much of the 78641 corridor expands in spring and shrinks in summer, which cracks post footings and tilts gate posts. A gate sags in the hinge post, not in the middle, and that’s where we start. We dig out the old post, pour a deeper footing anchored below the active clay zone where possible, and weld the new post in true alignment with the operator’s travel path. Then we re-hang the gate and verify the swing path is clean. This is not a quick concrete patch. It’s the repair that keeps the next spring’s heaving from undoing everything.
Rail Repair
Rails crack at the weld joints, especially on slide gates and driveway gates that have taken a hit from a car or a delivery truck. We weld the rail reinforcement on site, using the same approach a good fabricator would: clean the joint, weld both sides, and re-coat. On gates with automated operators, we check the rack and pinion alignment before we finish, because a welded rail that’s slightly off will chew through the gear in a matter of months.
Custom Welding
Sometimes you don’t need a replacement part. You need a custom bracket, a reinforced corner, a gate extension, or a new locking tab fabricated to fit. We do that on site with mobile welding equipment. If you’ve got an HOA requirement for a specific iron profile or finish, we’ll match it. We’ve done custom work for gates in Crystal Falls where the management company required the welded patch to be indistinguishable from the original panel. It passed on the first walkthrough.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Leander
We service and stock parts for the operators most common in Leander’s newer communities. That includes Viking, DoorKing, and Elite operators, along with Ghost Controls units that show up on a lot of builder-installed driveway gates in Travisso and Sage Creek. Having parts for these brands locally means we’re not waiting on a shipment from Dallas when your gate arm snapped. We carry a range of hinges, rack sections, rollers, and weld-on tabs on our trucks, so most Leander repairs are done in one visit.
Our Gate Parts & Welding team keeps the truck stocked for exactly the repairs we see in Williamson County. That’s the advantage of a shop that knows what Leander throws at gates.
Common Gate Parts & Welding Problems We See in Leander Homes
- Cracked post footings from clay movement: The Vertisol clay over caliche heaves and contracts with every wet and dry cycle. Poured footings cracked by this movement tilt posts and rack gate frames, often within five to ten years of the original install.
- Hinge welds failing on builder-spec gates: Production builders in Leander’s 2005-2023 tract communities often spec’d lighter hinges than the gate weight actually requires. The hinge looks fine until the weld gives way, and then the whole gate drops and drags.
- HOA compliance rejections: In Crystal Falls and Travisso, a gate repair using a close-but-not-matching powder-coat color or a slightly different iron profile gets flagged by the management company and ordered redone. We’ve seen functional repairs get torn out over a shade difference. We match finishes before we weld.
- Freeze damage from winter storms: The 2021 ice event snapped automated gate arms and burned out motor openers across Leander. Rack and pinion sections on slide gates were especially hard hit, along with solenoid locks that froze solid and stripped their internals.
Pricing for Gate Parts & Welding in Leander, TX
Here are honest numbers for the Leander market. Hinge replacement on an ornamental iron gate in Leander typically runs $150 to $350 per hinge, including the part, welding, and finish matching. Post replacement runs $400 to $900 for a single post, and that includes the footing work. Rail repair runs $100 to $250 per rail section depending on how much welding and reinforcement is needed. Custom welding is quoted by the hour, and in Leander we charge $95 to $165 per hour plus materials, with the total quoted and agreed before any work starts. That’s the rule, not the exception.
What moves the price: whether the post footing needs to be excavated and re-poured deeper, whether HOA finish matching requires a custom powder-coat order, and whether the gate operator needs to be removed and re-aligned while we work. A free second opinion on any written estimate is available, and there’s $40 off any repair over $200. Seniors and veterans get 10% off every job, permanent, no card to show beyond an ID or a word. Call (877) 610-2993 and we’ll give you a number you can hold us to.
We Also Serve Cities Near Leander
We work up and down the 183 corridor. If you’re in Leander, we’re already in your neighborhood, but we also take calls from Cedar Park, Lago Vista, Brushy Creek, and Anderson Mill for gate parts and welding work. Same crew, same warranty, same straight answer.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Leander
Yes, in nearly every case. Crystal Falls and Travisso architectural committees require gate repairs to be submitted for approval before work starts, and they mandate exact powder-coat color and iron profile matching. We’ve seen repairs rejected and ordered redone because the finish was a shade off. Before we start any visible gate work in those communities, we’ll help you understand what the committee needs to see and weld everything to the spec they enforce. Call (877) 610-2993 and we’ll walk you through the approval terrain.
That’s the Vertisol clay under much of Williamson County expanding when spring rains soak it, then shrinking in the summer heat. The movement cracks shallow post footings and tilts the post, which is why the cracking repeats year after year. The fix is not more concrete in the same hole. We excavate and pour a deeper footing that reaches past the active clay zone where possible, then weld the post back true. That’s the difference between a repair that lasts and one you’ll redo next April.
Yes, with care. We prefer to unbolt or cold-cut the old hinge where possible to preserve the surrounding finish, then weld the new hinge in place and grind, prime, and finish the repair area. The finish match is critical in Leander’s HOA communities, because a visible patch that doesn’t match the builder-spec color gets flagged. We match the existing finish before welding so the repair reads as original. Call for an exact quote, estimates are free.
Unfortunately, yes. The 2021 freeze hit slide gates across Leander hard, especially rack and pinion sections that had worn thin already. Sustained sub-freezing temperatures made the metal brittle, and when the operator tried to move a gate that was frozen to its track, the rack teeth sheared. We replace rack sections and pinion gears regularly in the 78641 corridor. If your gate is still running rough, don’t wait for the next cold snap. Call (877) 610-2993 and we’ll tell you what’s actually worn out.
We’re used to it. We work with management companies and HOA boards in Crystal Falls, Travisso, Bryson, and Sage Creek on a regular basis. We submit the information the committee needs, keep the work inside the approved parameters, and make sure the finished repair passes the post-work walkthrough. We’re not a company that’ll tell you to skip approval and hope nobody notices. In Leander, someone always notices. We do the paperwork and the welding both.
If your gate is sagging, cracked, or frozen, call (877) 610-2993. You’ll get a person, a straight answer, and a price you can hold us to. We serve Leander from the 78641 side over to 78646, and we’ll come take a look. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Leander with on-site gate welding and parts since 2001.