Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Leander
Gate installation in Leander typically runs $1,800-$6,500 for a standard automated driveway gate, with most jobs completed in one to three days once materials are on site. Pedestrian gates run $600-$1,900, and adding automation to an existing manual gate starts around $1,200. Those are real numbers for Williamson County, not national averages, and we quote the price before any work begins. Call (877) 610-2993 and a live person answers, day or night.
We know Leander because we work it every week. The clay heave in Crystal Falls, the HOA specs in Travisso, the builder-grade operators failing on schedule in Bryson and Sage Creek. Hal Gatewood has been at this since 2001, and the name is on the shop.
Why Gatewood Fence & Gate Is Leander’s Preferred Gate Installation Company
Leander homeowners tend to call us after someone else has already been out. Sometimes it’s a national outfit that quoted one price on the phone and rang the doorbell with another. Sometimes it’s a handyman who set post footings at code minimum and now the gate binds every spring when the clay swells. We fix that work, and we install it right the first time so you don’t have to think about it again.
Our Gate Installation crew works in Leander on 78641, 78645, and 78646 every week. When you call, you get a straight answer about scheduling because we know how long it takes to get a concrete truck down Crystal Falls Parkway, not because we’re guessing from a map. Hal’s phone number is on the invoice. His shop address is published. If something isn’t right, one call brings him back under the 90-Day Done Right Promise, stated plainly in writing on every job.
Our Gate Installation Services in Leander
Driveway Gate Installation
A driveway gate in Leander has to handle two things most installers never plan for: the soil under it and the HOA looking at it. We build gate posts on deeper, stabilized footings than code requires because we’ve seen what Vertisol clay over caliche does to a post that’s only 30 inches down. For a standard ornamental iron driveway gate in 78641, plan on $2,800-$6,500 installed, depending on width, automation, and finish. Every job includes the power run, safety edges, and a written price before we order steel.
Pedestrian Gate Installation
Pedestrian gates in Leander are mostly two types: powder-coated ornamental iron matching the driveway gate, and cedar privacy gates along the side yard. The cedar gates rarely get sized right by production builders, and the posts go in shallow because it’s faster. We set every pedestrian gate post below the active clay band, whether it’s in Travisso or off of Bagdad Road, and we hang the gate to swing true. A basic cedar pedestrian gate with hardware runs $600-$1,100. Ornamental iron starts around $900 and goes up from there.
Sliding Gate Installation
Slide gates make sense on Leander lots where a swing gate would block the driveway approach, but the track is unforgiving on caliche. If the footing isn’t deep and the track isn’t leveled for drainage, the first wet season walks the track and racks the panel until the roller guides jam. We cut slide gate footings into the caliche deep enough to stay put, grade the track bed so water runs off instead of pooling, and run the operator on its own circuit. Slide gate installations in Leander typically run $3,500-$8,000 with automation.
Swing Gate Installation
Swing gates are the most common automatic gate in Leander, which is why most of our callbacks start with a builder-grade swing opener that’s bound up. The gate itself is usually fine. The post underneath it isn’t. We install swing gate hinge posts on footings that go down past the heave zone, then re-square the frame before the opener ever gets bolted on. A single swing gate with a proper operator runs $2,500-$6,000 in Leander. Double swing gates run $3,800-$7,800, and the extra post doubles the reason to dig deep.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Leander
We install and service operators from DoorKing, Ghost Controls, Elite, and Viking, and we know which ones hold up better on Leander’s clay. Ghost Controls kits are popular in Bryson and Sage Creek because the build quality is good for the price, but the solar versions need a panel angle and battery spec that accounts for Leander’s freeze events. DoorKing slide operators are heavier-duty and handle commercial-style gates well. If you’re replacing a builder-grade opener in Crystal Falls, we’ll match what works, not just what was there before. We keep common parts for these brands on the truck when we’re working in 78641 and 78645, so a bad limit switch doesn’t mean a second trip.
Common Gate Installation Problems We See in Leander Homes
- Clay heave tilting hinge posts. Leander’s expansive soil swells in spring and shrinks hard in the summer. A post set at code-minimum depth will tilt within two seasons, and a tilted post racks the gate frame and binds the opener. We dig deeper and backfill with a non-expansive mix to hold the post steady.
- Builder-grade operators on automation-ready gates. The LiftMaster opener the production builder put on a 2016 home in Crystal Falls wasn’t specced for post movement. A quarter inch of heave at the hinge post strips the rack and pinion. If your gate chatters or stalls mid-cycle, the post moved before the motor did.
- Manual gates asked to turn automatic. A lot of Leander homes built after 2010 got a nice ornamental iron driveway gate but no conduit for a motor. Running exposed low-voltage wire along the fence line works until the first ice storm, and then it doesn’t. We run proper conduit and a dedicated circuit before we mount the operator.
- HOA-mandated finish matching. In Travisso and Crystal Falls, the architectural committee keeps records of approved powder-coat colors and iron profiles. Install a gate that’s close but not exact and the management company flags it and orders it redone. We pull the HOA specs and match before we fabricate anything.
Pricing for Gate Installation in Leander, TX
Here’s what we see in Leander, honestly. A manual cedar pedestrian gate runs $600-$1,100. An ornamental iron pedestrian gate runs $900-$1,900. A single swing driveway gate with automation runs $2,500-$6,000. A double swing gate runs $3,800-$7,800. A slide gate with automation runs $3,500-$8,000. What changes the price: gate width, steel gauge, powder-coat color requirements from your HOA, automation brand, and how much trenching the power run needs. The price is quoted and agreed before any work starts. No trip charge inside Williamson County, and a free second opinion on any written estimate you already have. Call (877) 610-2993 and we’ll give you a real number.
We Also Serve Cities Near Leander
Our Gate Installation in Leander coverage extends into the surrounding west Williamson and northwest Travis County communities. We work regularly in Cedar Park, Lago Vista, Brushy Creek, and Anderson Mill. Dispatch and scheduling run from the Austin office, and crews are in Leander locally every week.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Leander
Leander sits on expansive Vertisol clay over caliche bedrock, while Round Rock’s soil trends sandier and flatter. The clay in 78641 and 78645 swells when wet and shrinks in the 100-degree summer, which pushes shallow footings out of plumb within a couple of seasons. We set gate posts in Leander on footings that go below the active clay band and backfill with non-expansive material so the gate doesn’t rack. Call (877) 610-2993 if your gate already has a lean - we’ll tell you whether the post or the panel is the problem.
Yes. We pull the architectural committee’s approved finish specs and iron profile for your section before we order or fabricate anything. HOA management companies in Leander do flag close-but-not-matching gates, and the homeowner gets stuck redoing it on their own dime. We’ve matched enough Crystal Falls and Travisso gates that we know which powder-coat codes go with which phase. The gate gets built to spec, and your committee has nothing to red-flag. Estimates are free at (877) 610-2993.
Most won’t, not as installed. During the 2021 freeze, solar gate openers across Leander snapped arms and cooked batteries because the panels were undersized and the batteries weren’t specced for sustained sub-freezing nights. A solar opener can work here if the panel is sized for winter sun angles and the battery has a cold-weather rating, plus a hard shutdown for ice. If your gate has to work during an ice event, we recommend a wired 120V operator with battery backup, not solar. Call us for a straight answer on your specific gate.
You need to look at the post first. A gate sags in the hinge post, not in the middle of the panel. If the panel still measures square and the boards aren’t rotting, the post has likely tilted in the clay and taken the whole assembly out of level. We reset the post deeper and re-hang the same gate when the wood is sound, which saves you the cost of a new panel. If the post is rotted at grade from sprinkler overspray - common in Leander’s HOA subdivisions - we replace it and sleeve the base so it doesn’t happen again. Call (877) 610-2993 and we’ll tell you over the phone which it is.
Yes, and this is one of the most common upgrades we do in Leander’s 2010s master-planned communities. The catch is that most manual gates never got a conduit run. We trench a proper conduit path, pull a dedicated circuit from the panel, and mount the operator on posts that we confirm are deep enough to handle motor torque. It’s more involved than bolting a kit onto the gate, but it’s the difference between an opener that works through three winters and one that dies at the first hard freeze. We’ll give you a written price before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Leander since 2001.