Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haysville
Gate parts and welding in Haysville usually comes down to one thing: a post that moved. The clay under 67060 swells in the spring rain, shrinks hard in the July heat, and every cycle torques the post a little further out of plumb. That’s why our Gate Parts & Welding crew resets more hinge posts in Haysville than anything else. If your gate drags, sags, or won’t latch, call Hal at (877) 610-2993 and a real person answers, day or night. We’ll come out, look at the post and the hinge and the rail, and tell you straight what it needs and what it costs, before any work starts.
Why Gatewood Fence & Gate Is Haysville’s Preferred Gate Parts & Welding Company
Hal Gatewood has owned and operated Gatewood since 2001. That’s 29 years of fixing gates in the same kind of soil and wind you deal with every day in Haysville. The name is on the shop, the address is published, and the license number is there for anyone who wants to look it up. If something isn’t right, you can drive over, walk in, and talk to the owner directly. That’s not a corporate promise. That’s just how a local shop works.
Our customers in Haysville call for gate installation, hinge replacements, post re-sets, rail repairs, and custom welding on fences that were installed back when these neighborhoods were first built. We know the 1970s ranch houses on the south side of town, the older chain-link runs along the main drags, the acreage gates out east where the wind never quits. We answer the phone with a live person around the clock, and every job carries the 90-Day Done Right Promise in writing.
Key Takeaways:
- Owner-operated since 2001, not a franchise or a call center
- On-site welding; we fix the gate in your driveway, not in a shop across town
- Live person answers 24/7, including weekends and after storms
- Free estimate, upfront pricing, $40 off any repair over $200
- 90-Day Done Right Promise stamped on every invoice
Our Gate Parts & Welding Services in Haysville
Hinge Replacement
In Haysville, hinge replacement is rarely just swapping a bracket. The post has usually leaned south from years of swelling clay, and the lag bolts have torn out of the wood frame. We cut the damaged section free, re-set the post if it’s moved, weld or bolt on a heavier hinge appropriate for the gate’s swing direction and wind load, and get the panel closing square again. If we don’t fix the post, you’ll be calling us again in two seasons.
Post Replacement
A gate sags in the hinge post, not in the middle, and on Sedgwick County clay that’s where we start. We pull the old post, dig out the root of the problem, and set the new one deeper with compacted gravel and concrete that gives water a path away from the footing. Then we weld the hinge brackets to the post or use through-bolts where the gate is heavy enough to warrant it. This is the core repair in 67060, not an add-on.
Rail Repair
Chain-link rail ends snap when the post shifts and the fabric binds. Wood top rails crack when a 16-foot panel twists in a 40 mph southwest gust. We cut out the broken section, sleeve and weld or bolt a new rail, and check the whole run for tension before we leave. If the rail broke because the post moved, we tell you that too, because fixing the rail without the post is fixing it twice.
Custom Welding
Some gates were never built right for Kansas wind. We weld on-site: reinforcing gussets at the corners, heavier hinge plates, diagonal cross-braces for wide panels, new bottom stubs where the old one rusted out along the bottom rail. We can pull a bent tube frame straight and weld it while it’s still in the driveway, no hauling off. If you’ve got a round-tube ranch gate that’s racking, we can usually save it without replacing the whole panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haysville
We’re certified to work on Linear, Viking, Ghost Controls, and DoorKing equipment, among others. If your gate operator is straining because the gate is out of alignment, the operator isn’t the problem; the gate is. We fix the mechanical side first, then set the limits and the force so the opener isn’t burning itself out. We keep common hardware on the truck for these brands and can often finish a Gate Parts & Welding repair the same day we look at it. For parts we don’t stock, we get them fast and come right back.
Common Gate Parts & Welding Problems We See in Haysville Homes
- Sagging 1980s wood privacy gates: The hinge posts lean south after a wet spring, pulling lag bolts out of the frame. The panel drags across the driveway and the latch misses the catch. We re-set the post, install heavier hinges, and square the frame.
- Chain-link slide gates binding on the track: Expanding clay pushes the track out of level. The gate stops halfway, the opener overloads, and the rollers grind themselves flat. We re-level the track and replace the rollers and guide wheels before adjusting the operator.
- Riveted aluminum tube frames racked by wind: The constant south-southwest blow pops rivets and splits the mid-rail, often after a spring hailstorm dents the panel. We weld the seams, add corner gussets, and replace the rivets with structural fasteners.
- Latch and lock failures on the exposed side: Gates with a south or west swing take the full brunt in Haysville. The latch wears, the gate flexes, and the alignment drifts. The person who shows up checks hinge gauge and swing direction before quoting anything on the windward side.
Pricing for Gate Parts & Welding in Haysville, KS
Here’s what gate repairs typically run in Haysville:
- Single hinge replacement: $140-$260, including the hinge, fasteners, and labor
- Hinge post re-set with new concrete footing: $320-$680, depending on depth and post size
- Full post replacement (steel or wood): $450-$950
- Rail repair (cut and sleeve, welded): $180-$390
- Custom welding (gussets, cross-bracing, crack repair): $110-$75 per weld point, plus material
Heavier gates, deep footings, and wide panels push toward the higher end. Light chain-link hinge fixes sit at the lower end. Free estimates are standard. If you have a written estimate from another company, bring it to us and we’ll give you a free second opinion. The price we quote is the price you pay, agreed before anything starts. No trip charge inside the county, $40 off any repair over $200, and seniors and veterans always get 10% off.
We Also Serve Cities Near Haysville
From our metro office, our crews serve Haysville and the surrounding communities: Derby, Mulvane, Wichita, and Park City. If you’re just outside 67060, call (877) 610-2993 and we’ll tell you when we can be there. Same crew, same 90-Day Done Right Promise, same upfront pricing.
Serving Haysville, KS - Our Local Coverage Area
We’re based in the Haysville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haysville
Because the soil under the post is swelling and shrinking with every rain and drought cycle, and the footing wasn’t set to handle it. In 67060, a lean comes back within one to two growing seasons if the post isn’t re-set deeper with proper drainage. We also compact gravel around the base and, where needed, add drain rock so water doesn’t pool against the concrete. Call (877) 610-2993 for a post inspection and an honest read on whether yours can be saved or should be replaced.
Solar works well on Haysville acreages when the panel has clear southern exposure and the gate is properly balanced. But a 14- or 16-foot farm gate that sags will kill a solar opener fast. We recommend getting the gate mechanically right first, setting the posts, and verifying the swing weight before adding any Haysville gate motor & opener. We service Linear and Ghost Controls solar-ready models and can wire or mount them once the gate moves freely.
Usually, yes. If the tube isn’t crushed flat and the surrounding frame is still square, we can cut out the damaged section, sleeve it with a section of next-size tube, and weld it on site. This is a common repair in Haysville, where wind and hail damage the mid-rail while the rest of the gate is still serviceable. It’s almost always cheaper than a new panel.
Two things matter: the hinge post has to be set deep and dead plumb, and the gate itself needs a diagonal brace from the top hinge corner down toward the latch side bottom. Without that brace, a 16-foot span will flex under its own weight even on a calm day. We weld in the brace, re-set or reinforce the post, and adjust the hinges so the gate carries its weight the way it was designed to.
A heavy-duty spear latch or a gravity latch with a strong strike plate works best. The key is the strike plate: it has to be welded or bolted into something that doesn’t flex. On south-facing gates in Haysville, we also check that the gate swings freely without slamming. Gate access control in Haysville, like a keypad-entry lock, can be a good addition if you want to avoid walking out into the wind every time. Call (877) 610-2993 and we’ll match the latch to your gate’s weight, swing direction, and exposure.
Call Gatewood Fence & Gate in Haysville Today
If your gate is dragging, sagging, or fighting the latch, call (877) 610-2993. You’ll talk to a real person. We’ll schedule a time that works for you, give you a straight quote, and fix what’s actually wrong, not what’s easiest to replace. Hal Gatewood’s name is on the invoice and the 90-Day Done Right Promise is on paper. That’s the deal in Haysville.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haysville and the surrounding communities with honest gate repair and welding since 2001.