Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Haysville
Gate motor repair in Haysville typically runs $240-$680 depending on whether the opener, the power source, or the post footings failed first. Most Haysville calls we take are same-visit diagnostics, and we carry parts for Linear, Viking, Ghost Controls, and DoorKing on the truck so we don’t have to leave your gate stuck open for days. If your gate stopped moving this morning, call (877) 610-2993 and a real person answers.
We work across all of 67060, from the older ranch streets off Grand Avenue to the acreage entrances south of 71st Street and out along South Broadway. Long driveways, wide farm gates, and clay soil that won’t hold a post still are the normal here, not the exception. Hal Gatewood has been fixing gates since 2001, and he’ll tell you the same thing he tells every Haysville customer: the motor is rarely the whole story. The post under it usually is.
Why Gatewood Fence & Gate Is Haysville’s Preferred Gate Motor & Opener Company
We’re not a national operation with a rotating cast of technicians. You deal with Hal or one of his small crew, and the person who shows up is the person who will answer the callback if anything isn’t right. That matters in a town like Haysville, where word gets around fast and a bad weld at one house gets mentioned at the hardware store before lunch.
Our Haysville customers call us for a few reasons. We answer the phone around the clock, not with a voicemail. We weld on site, so your bent hinge post or stripped rack stays in your driveway instead of getting hauled to some shop across the county. And every job comes with the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no arguing about whether the failure is covered.
Haysville’s clay heave means we re-set posts and pour deeper footings more often than we swap motors. That’s a local reality you don’t learn from a training video. Hal knows what a 16-foot farm gate on a south-facing swing does to a hinge post after three freeze-thaw cycles, because he’s fixed enough of them in this town to have lost count.
Our Gate Motor & Opener Services in Haysville
Motor Installation
A new opener on a Haysville driveway runs $950-$1,850 installed, depending on gate width, weight, and whether we’re running line voltage or going solar. We don’t just bolt the motor to whatever post is there. We check plumb first, because a motor installed on a leaning post will strip its own gears within two seasons on Sedgwick County clay. We quote the full job upfront and that’s the number you pay.
Motor Repair
Most Haysville motor repairs fall between $240 and $680. That covers the common failures: stripped rack and pinion gears from post heave, blown control boards from spring storm surges, burnt transformers, and limit switches that lost their setting. We diagnose first, explain what actually failed, and never swap a part that doesn’t need swapping. Hal’s repair-first philosophy isn’t a slogan. He’d rather weld a bracket than sell you a new opener you don’t need.
Linear Motor Repair & Service
Linear operators are common on Haysville ranch-style homes and the acreage properties south of town. We service the full Linear line, from the smaller residential swing arms to the heavy slide operators on farm entrances. The wind out here is hard out of the south-southwest, which means Linear slide motors on east-west fence lines take a beating on limit switches and drive chains. We stock those parts locally so we’re not waiting on a ground shipment while your gate hangs open.
Slide Motor Installation & Repair
Wide farm entrances and long setbacks usually call for a slide operator rather than a swing arm. A slide motor on a Haysville acreage gate starts around $1,400 installed and goes up with gate length and power requirements. The biggest mistake we see on slide gates is undersized posts. A cantilevered slide gate puts enormous torque on its base posts, and clay heave only makes it worse. We pour footings deep enough to outlast the swelling cycle, not just deep enough to hold the gate on a dry day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haysville
We’re certified to service nine major gate brands, and in Haysville we see a lot of LiftMaster, Linear, Viking, Ghost Controls, and DoorKing out on the acreages. We stock common parts for those brands in our service vehicles, which means faster repair time when your opener quits on a Sunday evening. If we don’t have the board or gear on hand, we know exactly what to order and how long it takes to arrive, so you’ll know the timeline before we turn a wrench. No open-ended “we’ll see when the part shows up” answers.
Common Gate Motor & Opener Problems We See in Haysville Homes
- Rack and pinion gears stripping from post heave: The clay soil swells with spring rain and shrinks in summer drought, tilting the hinge post out of plumb. A gate that drags even a quarter inch on the wrong side of a swing will strip teeth off the rack gear. A repair that fixes the gear but not the post will strip again within one to two growing seasons.
- Wind-bent hinge posts on south- and west-facing gates: The prevailing blow out of the south-southwest racks wide farm gates constantly. Hinge posts lean, bolts shear, and motors without battery backup lose power during the exact storm outages when you need the gate working to get a truck in or out.
- Freeze-thaw cycle pushing posts out of alignment: Kansas winters don’t stay cold. They freeze, thaw, freeze, thaw, that cycle works posts loose even in concrete footings. When the post moves half an inch, the loop detector misreads and the safety photocells lose their beam alignment, leaving the gate stuck mid-cycle or refusing to close.
- Long driveway power problems on acreage lots: Trenching line voltage 200 feet down a Haysville driveway runs thousands of dollars and tears up your yard. That’s why solar-powered openers with battery backup are the right answer for many properties south of 71st. We pair the right panel and battery bank with your motor so the gate works in winter twilight and during storm outages.
Pricing for Gate Motor & Opener in Haysville, KS
A straight motor swap on a standard residential swing gate in Haysville runs $550-$900 for the opener plus $400-$900 for installation, depending on access, gate weight, and whether we’re replacing hardware at the same time. Motor repair work, as mentioned, lands between $240 and $680 for most failures. Slide motor installations on farm entrances start around $1,400 and climb with gate length and power needs. Solar panel and battery backup systems add $350-$900 depending on the motor draw and the length of the driveway run. We quote the job before any work starts, and that’s the price you pay. No trip charge inside the county, and seniors and veterans get 10% off every job. Call (877) 610-2993 for an exact quote, estimates are free.
We Also Serve Cities Near Haysville
While this page is for Haysville, our Gate Motor & Opener crew works throughout south-central Kansas. We regularly run service calls to Derby, Mulvane, Wichita, and Park City, and the same 90-Day Done Right Promise applies in every one of those towns. If you’re a few miles outside Haysville lines, give us a call and we’ll tell you straight whether we can get to you the same day.
Serving Haysville, KS - Our Local Coverage Area
We’re based in the Haysville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Haysville
Because your post is moving. The clay soil around Haysville swells when spring rain saturates it, and that swelling pushes your hinge post out of plumb. A gate that drags even slightly strips rack and pinion teeth fast. Replacing the gear without re-setting the post means you’ll be back in the same spot next spring. Call (877) 610-2993 and we’ll check the post first.
Usually yes. Running line voltage 150 feet or more down an acreage driveway means trenching through compacted clay, which is expensive and tears up the yard. A properly sized solar panel and battery bank handles most residential and light farm gates through Kansas winters if the battery is matched to the motor. We pair the panel with the right battery so the gate works in storms and after dark.
If the gate has a choice, avoid a swing that faces the brunt of the south-southwest wind. A full exposure means the wind pushes against the motor every cycle, racks the frame, and bends hinge posts. When there’s no choice, we use heavier gauge hinges, a stouter post, and sometimes a slide conversion. We’ll tell you honestly whether the wind exposure on your property makes a slide operator the better long-term answer.
Yes, it does. Loop detectors buried in clay soil read a change in inductance when your vehicle passes over, and when freeze-thaw or clay heave shifts the ground or the wire, the detector gets a false reading and cuts the motor mid-cycle. It’s a common Haysville call we fix by re-cutting the loop at the correct depth and re-aligning the safety photocells so the gate finishes its cycle. Call (877) 610-2993 and we’ll have someone out to Haysville fast.
Yes. Residential gate operators in Kansas follow federal UL 325 entrapment standards, which require photo eyes or contact edges that reverse the gate if it hits someone or something. On farm gates, a lot of older openers were installed without working entrapment protection or with sensors long dead. We bring those up to standard as part of any repair. The last thing anyone wants is a 16-foot gate coming down on a kid or an animal because the reversing edge stopped working.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Haysville
If your gate opener is down in Haysville, call (877) 610-2993. A person answers, day or night. We’ll get someone out to your property, diagnose the actual problem, and give you a price before we start. If you’d rather meet Hal first, drive to the shop and look him in the eye. The name is on the building, it’s been there since 2001, and he’s not going anywhere.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haysville and south-central Kansas since 2001.