Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haysville
Most gate installations in Haysville fail because the footings were dug too shallow for Sedgwick County clay. That’s the thing you can’t see until it’s too late. A post set 24 inches deep will heave and tilt within two growing seasons here, and then the gate sags, drags, or won’t latch at all. We’re Gate Installation specialists who grew up working this soil, and we know exactly how deep to dig and how to backfill so your gate stays plumb for decades. If you’re anywhere in the 67060 zip code, call (877) 610-2993 and ask for Hal. He’ll tell you straight what your gate needs and what it will cost before any work starts.
Why Gatewood Fence & Gate Is Haysville’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on every invoice and every job we take. That matters in a town like Haysville, where people talk over the fence line and a bad job follows you for years. We’re not a franchise with a rotating crew. The person who shows up to quote your gate is the same person who’ll build it, and that person answers the phone when you call. Not a voicemail, not a call center three states away. A live person, 24 hours a day.
We’ve spent over two decades earning a strong local reputation around Haysville, and we intend to keep it. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No runaround, no fine print. That promise means something different when the owner’s name is on the shop and the shop is down the road.
Response time to Haysville is quick. Our Wichita-based crew reaches most Haysville properties within the hour for quotes and service calls, and we schedule installations around your timeline, not ours. For acreage jobs off 71st Street South or out toward the Mulvane line, we bring everything we need on the truck so there’s no second trip.
Our Gate Installation Services in Haysville
Driveway Gate Installation
Wide rural driveways around Haysville need more than a standard opener bolted to a post. A 14-foot or 16-foot double swing on a farm lot carries serious wind load and weight. That’s where we start every driveway gate quote: measuring the opening, checking the prevailing wind direction, and sizing the operator to handle the span. If your driveway is long and straight, a slide gate may be the better answer, but we’ll tell you that only after looking at the actual conditions on your property.
Pedestrian Gate Installation
A walk gate on the side of a ranch home in Haysville gets opened and shut more times in a week than the driveway gate does in a month. That’s why we build pedestrian gates with the same footing depth and hinge gauge we’d use on a farm entrance. On the clay soils around town, a pedestrian gate post that tilts will pinch the latch and start sticking. We set them below the heave line and backfill with compacted granular so the latch keeps working in February and July alike.
Sliding Gate Installation
Sliding gates are a natural fit for wide openings and windy exposures, and Haysville has both. A cantilever slide gate doesn’t ride on the ground, which means it won’t hang up on snow, mud, or the gravel that accumulates on acreage drives. We install rack-and-pinion slide gates on lots where the driveway is wide enough to store the gate in the open position without blocking anything. The footing for the slide track needs to be set deep and level, or the gate will bind every time the clay shifts a fraction of an inch.
Swing Gate Installation
Swing gates are the most common gate style in Haysville’s older neighborhoods, where homes were built from the 1960s through the 1990s and fenced by the original owners. Those wood privacy and chain-link gates are now 30 to 50 years old, and the hinge posts in particular are tired. When we install a new swing gate, we don’t reuse the old post no matter how solid it looks. We pull it, over-excavate the hole, and set a new post deep enough to stay put. Fixing the panel without fixing the post means fixing it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haysville
We’re certified to work on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Haysville customers, that means we can usually match whatever operator you already have, and we keep common parts for FAAC, Linear, and LiftMaster on the truck. If you’ve been told your old operator is dead and needs replacing, let us look at it first. Hal has been welding and rebuilding since 2001, and we’d rather fix a solid motor than sell you a new one you don’t need.
Common Gate Installation Problems We See in Haysville Homes
- Shallow footings that heave in clay. A post poured at 24 inches in Haysville’s expansive clay will tilt and twist within one to two growing seasons. Spring rain swells the soil, summer drought shrinks it, and the cycle racks the post out of plumb. We dig footings deep enough to get below the heave line, typically 36 to 48 inches depending on the gate size and exposure.
- Undersized operators on wide farm gates. A light-duty residential swing opener on a 14-foot gate will burn out fast under prairie wind load. The south-southwest wind that sweeps across Haysville catches a wide gate face like a sail. We size operators for the actual span and the wind exposure, not just the gate’s dead weight.
- Hinges installed on the exposed side without checking swing direction. Gates that swing south or west in Haysville take the full brunt of the prevailing wind. Bent hinges, blown-off panels, and racked frames are the result. Before we quote any job, we check which direction the gate faces and what the wind does to it across the seasons.
- Aging wood and chain-link frames from the original build. Many Haysville homes still have their original 1960s to 1990s gate panels. The wood is split, the chain-link hardware is corroded, and the hinges are worn oval. Swapping a hinge on a rotted frame just moves the problem. Full panel replacement with new posts is often the only fix that lasts.
Pricing for Gate Installation in Haysville, KS
A standard pedestrian walk gate in Haysville typically runs $350 to $850 installed, depending on the frame material and whether we’re replacing the posts. A single driveway swing gate, installed with new posts set below the clay heave line, usually lands between $1,800 and $3,400. A 16-foot double swing on an acreage, with a heavy-duty operator like the LiftMaster LA500, runs $4,200 to $6,800 installed, including the solar panel and loop detector when needed. Sliding gates start around $2,500 for a basic residential slide and go up from there based on span and operator.
What drives the price on Haysville jobs is almost always the footing work. Clay soil means deeper excavation, more concrete, and more granular backfill than a job in a sandier county would need. We never cut corners there, but we also don’t pad the number. The price Hal quotes is the price on the invoice, agreed before any work starts. No trip charge inside the county, and we’ll give you a free second opinion on any written estimate you’ve received. Call (877) 610-2993 and we’ll come measure, quote, and schedule.
We Also Serve Cities Near Haysville
If you’re outside Haysville proper, we make the same commitment to Derby, Mulvane, Wichita, and Park City. Same live person on the phone, same 90-Day Done Right Promise, same owner-operated crew showing up when we say we will. If you’re not sure whether your property falls inside our service area, call (877) 610-2993 and ask. If it’s close, we’ll probably just come take a look.
Serving Haysville, KS - Our Local Coverage Area
We’re based in the Haysville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haysville
Most gate posts in Haysville need a footing between 36 and 48 inches deep, not the 24-inch standard many installers use. Sedgwick County clay swells when saturated by spring rain and shrinks hard during summer drought, and that cycle will heave a shallow footing out of plumb within two growing seasons. We over-excavate, set the post below the heave line, and backfill with compacted granular material that doesn’t hold water against the post. For a 16-foot double swing or a slide gate on an acreage, we go deeper. Call (877) 610-2993 and we’ll tell you exactly what your soil requires after we see it.
Yes, and solar is usually the best answer for rural gates where running mains power means a trench hundreds of feet long. We install solar-powered operators with 20-watt or larger panels sized for the operator and the season. One caution from our own experience: lightweight “solar kit” operators sold online fail fast on wide farm gates because they can’t handle wind load. Our crew recently finished a 16-foot double swing near 71st Street South where the owner had burned through two of them. We installed a LiftMaster LA500 dual-gate operator with a 20-watt solar panel and a loop detector, and it now clears drive-through traffic with a stock trailer hitched. Call (877) 610-2993 and we’ll spec the right panel and operator for your gate.
A rack-and-pinion slide gate can comfortably handle openings from 16 to 40 feet wide, and 50-foot spans are possible with the right frame and operator. On Haysville acreages, a slide gate is often the better choice than a double swing because it doesn’t fight the wind the same way. A swing gate catches the south-southwest wind like a sail every time it opens; a slide gate moves along the fence line and the wind works against it far less. The trade-off is that you need side room to store the gate in the open position. We’ll measure your driveway and tell you honestly if a slide makes sense or if a swing gate with a heavy-duty operator is the simpler fix. Estimates are free, so call (877) 610-2993 and we’ll come look.
For a long, wind-exposed driveway in Haysville, a slide gate is usually the better call. The persistent south-southwest wind across the flat prairie racks swing gates, bends hinges, and blows lightweight panels off their hangings. A slide gate moves parallel to the fence line instead of swinging into the wind, so it takes far less beating. If a swing gate is what you want, we’ll use a heavier operator and oversize the hinge posts. The answer depends on your specific exposure, and we’ll tell you straight after walking the property. Call (877) 610-2993 for a free measure and a written quote.
Yes. Any automatic gate operator, on a farm lot or in town, should have safety photocells or contact edges to prevent the gate from closing on a person, animal, or vehicle. The UL 325 safety standard exists because automatic gates can and do injure livestock and people. We install photocells and safety edges on every automated gate we build in Haysville, and we position them for the way you actually use the gate, including trailer traffic and wide farm equipment. If you have an older automatic gate without working safety sensors, call (877) 610-2993 and we’ll get it sorted. A gate that closes without checking what’s in its path is a gate that will eventually hurt somebody.
If you need a gate installed in Haysville, call (877) 610-2993. Hal or one of the crew will answer, ask a few questions about your property, and set up a time to come measure. The quote is free, the price is locked before work starts, and the 90-Day Done Right Promise is in writing on every job. That’s how we’ve done it since 2001, and that’s how it stays.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haysville and all of Sedgwick County.