Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hawthorne
Gate parts and welding in Hawthorne usually means one of three things: a sagging gate that needs new hinges, a post that has rotted or snapped at the base, or a weld that finally gave out after years of salt air. We fix all three, usually the same day you call. Gatewood Fence & Gate has been owner-operated since 2001, and our Gate Parts & Welding team works on gate hardware throughout Hawthorne’s 90250 and 90251 ZIP codes every week. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Hawthorne’s Preferred Gate Parts & Welding Company
There is no dispatch queue here. Hal Gatewood’s name is on the shop and on every invoice, and the person who answers your call is the same person who will know what happened on your last job without pulling a file. Hawthorne customers call us back because we weld on site, in the driveway, rather than hauling the gate to some far-off shop. The 90-Day Done Right Promise is stamped in writing on every job we do in Hawthorne, from a simple hinge swap near Hawthorne Memorial Center to a full post replacement off Prairie Ave. If it’s not done right, one call brings us back. No runaround.
We keep a running inventory of the parts Hawthorne gates actually need: galvanized and stainless hinges, heavy-gauge post stock, weldable steel plate, gate rollers, and latch hardware sized for the wrought iron gates on 1950s to 1970s tract homes. Our techs are background-checked and uniformed, and we’re certified to service Linear, Viking, Ghost Controls, and DoorKing operators, among others. When you call about a gate in Hawthorne, you’ll talk to someone who knows what the marine layer does to a hinge pin, not a script-reader three states away.
Our Gate Parts & Welding Services in Hawthorne
Hinge Replacement
Hinges are the first thing to fail on a Hawthorne gate. Salt-laden air off the Pacific, only four to five miles away, eats through cheap zinc-plated hinges in three to four years. A typical hinge replacement in Hawthorne runs $180-$340 per gate, including grinding off the old hardware, welding on new galvanized or stainless steel hinges, and re-hanging the gate so it swings true. We carry weld-on barrel hinges and adjustable strap hinges matched to the weight of your gate, and we always check the post while we’re at it. A gate sags in the hinge post, not in the middle.
Post Replacement
The classic Hawthorne failure we see in tract-home neighborhoods is a post that looks fine up top but has rotted through at the base, right where moisture wicks into the footing. This is common on original wrought iron gates from the 1950s through 1970s. We dig out the old post, pour a proper concrete footing, and set a new schedule 40 galvanized post with a welded base plate. Post replacement in Hawthorne typically runs $320-$580, including concrete and finish work, and we quote the price before any work starts.
Rail Repair
Bent or broken rails happen when a gate gets hit or when years of sagging finally stress the frame past its limit. We straighten rails in place when possible, or cut out the bad section and weld in new steel matched to the existing profile. Rail repair on a Hawthorne driveway gate usually runs $150-$300, depending on how much steel needs replacing. Fix the panel without the post and you’ll fix it twice, so we look at the whole gate before we quote a rail job.
Custom Welding
Some gates should not be replaced. The original wrought iron on a 1960s Hawthorne home has a character that a new aluminum panel cannot match, and Hal would rather weld a cracked scroll or rebuild a rusted rail than sell you a gate you do not need. Custom welding runs $120-$450 for most repairs, including on-site work at your Hawthorne address. We weld steel, wrought iron, and aluminum, and we have the rod inventory to match the metal you actually have, not the metal we wish you had.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hawthorne
We service and stock parts for the major gate operator brands found across Hawthorne, including Linear, Viking, Ghost Controls, and DoorKing. The industrial stretch along Jack Northrop Ave and Crenshaw Blvd favors heavy-duty commercial units; the residential streets off Hawthorne Blvd and Rosecrans Ave lean more toward Viking and Ghost Controls swing operators. Because our Hawthorne customers call with everything from a dead remote to a slide gate that has lost position, we keep a working inventory of control boards, limit switches, photo-eyes, and gear sets on the truck. That means fewer second trips and less waiting for a part to ship from a warehouse county away.
Common Gate Parts & Welding Problems We See in Hawthorne Homes
- Corroded swing gate hinges. The June Gloom marine layer that settles over Hawthorne from May through July keeps humidity elevated for months. Zinc-plated hardware rusts fast, gates sag, and homeowners start leaning a shoulder into the gate to get it closed. We replace with galvanized or stainless steel hinges that stand up to coastal air.
- Snapped hinge posts at the base. On homes built between the 1950s and 1970s, especially in the 90250 ZIP, moisture wicks up through the concrete footing and rots the post from the inside out. By the time the gate visibly sags, the post often cannot be saved. We cut out the stub and set a new post with a proper concrete pour.
- Intermittent operator failures from corroded wiring. The same humidity that rusts steel also attacks wiring connections inside gate operator boards and photo-eye housings. A gate that trips entrapment protection for no visible reason is often a corroded connector, not a failing board. We diagnose before we replace parts, which saves Hawthorne customers real money.
- Industrial slide gate rack and pinion wear. Along Jack Northrop Ave and Crenshaw Blvd, high-cycle slide gates at commercial facilities run hundreds of cycles a day. Powder-coated steel racks wear down or rust through within a few years. We weld in stainless racks and re-calibrate loop detectors so the gate stops faulting on position errors.
Pricing for Gate Parts & Welding in Hawthorne, CA
Here is what you can expect to pay for common gate work in Hawthorne. Hinge replacement runs $180-$340 per gate. Post replacement, including concrete and finish work, runs $320-$580. Rail repair is $150-$300. Custom welding for frames, scrollwork, or rack replacement runs $120-$450 depending on metal type and hours. What changes the price most is access, post condition, and gate weight. A heavy wrought iron gate with a rotted post near a gas line costs more than a lightweight aluminum panel with clean access. Every Hawthorne job gets a written quote before any work begins, and the price we quote is the price you pay. There is no trip charge inside the county, and we take $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate on your specific gate.
We Also Serve Cities Near Hawthorne
Gatewood Fence & Gate serves Hawthorne and the surrounding South Bay communities, including Del Aire, Inglewood, Lennox, and Lawndale. If you are a few blocks over the city line, we still come out, and the pricing and warranty do not change. The salt air does not respect municipal boundaries, and neither do we.
Serving Hawthorne, CA - Our Local Coverage Area
We’re based in the Hawthorne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hawthorne
Hawthorne sits only four to five miles from the Pacific, close enough that persistent marine air and the annual June Gloom cycle push humidity high for months at a stretch. That salt-laden moisture accelerates rust on zinc-plated hinge hardware, so a hinge that might last a decade inland in Gardena can fail in three to four years in Hawthorne. The fix is galvanized or stainless steel hinges, which we stock for the exact gate styles common in 90250 and 90251. Call (877) 610-2993 for an exact quote; estimates are free.
For a painted steel gate near the coast, we specify hot-dip galvanized structural steel for the frame and posts, then powder coat over the galvanizing. For hardware, we use type 304 or 316 stainless fasteners and hinges. Standard zinc-plated hardware rusts out fast in Hawthorne, and plain carbon steel with only an enamel paint job is why so many 1960s-era gates have cracked welds today. We will quote the right spec, welded on site, before any work begins.
Yes. The aerospace and industrial facilities along Jack Northrop Ave and Crenshaw Blvd run high-duty-cycle slide gates that cycle hundreds of times a day, which calls for heavy-duty rack and pinion hardware, industrial loop detectors, and operators like LiftMaster commercial or FAAC units. Residential swing gates in Hawthorne’s tract neighborhoods do not see that duty cycle and use different hinges, operators, and wear parts. We recently replaced a corroded hinge post and welded a new stainless rack on a slide gate at a commercial facility off Jack Northrop Ave, where the original powder-coated steel had rusted through in under five years. The operator, a LiftMaster industrial unit, had been losing position on a worn rack, so we installed the stainless rack with proper post footings and re-calibrated the loop detector. The gate now cycles without the weekly fault calls the tenant had been dealing with. We carry both residential and industrial parts inventory for exactly this reason.
Look at the post before you look at the panel. If the gate sags but the post is still plumb, you probably need hinge replacement or a weld on the frame. If the post itself has begun to lean or shows rust weeping at the base, the post footing has likely rotted out and the gate will sag again no matter what you do to the hinges. In Hawthorne’s older tract homes, snapped or rotted posts are common because moisture wicks into the footing over decades. We diagnose the difference during a free estimate, and the quoted price is the price you pay. Call (877) 610-2993 to schedule a look.
Yes. California requires vehicular gate operators to have entrapment protection including photo-eyes or contact edges that reverse the gate if something is in the path. Hawthorne enforces this, and commercial gates along the industrial corridor are routinely inspected. The June Gloom humidity corrodes wiring connections at photo-eye housings and control boards, which can cause false trips or, worse, a safety device that stops working silently. We test entrapment protection on every operator service call in Hawthorne, and we replace corroded connectors and photo-eyes as part of any gate repair. For a free safety check, call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hawthorne since 2001.