Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Hawthorne
Gate access control in Hawthorne means keypads, card readers, phone entry, and remote systems that hold up to salt air and heavy daily use. For most Hawthorne homes and businesses, a keypad or phone entry repair runs $180-$450, while a full access control upgrade with new hardware typically lands between $900 and $2,800 depending on the system and the gate. We’re Gatewood Fence & Gate, and we’ve been fixing gates and access systems since 2001. Hal Gatewood answers calls himself around the clock, and a live person picks up every time you call (877) 610-2993. Hawthorne isn’t just another stop on our route. The marine layer off the Pacific, the post-war tract homes in 90250, the industrial gates along Jack Northrop Ave. We know what fails here and why.
Why Gatewood Fence & Gate Is Hawthorne’s Preferred Gate Access Control Company
We’ve worked in Hawthorne long enough to know the difference between a gate that needs a board and a gate that needs a whole new approach. Our Gate Access Control service is built on one principle: fix what’s broken, don’t sell what isn’t needed. Hal’s name is on the shop, the invoice, and the 90-Day Done Right Promise that comes with every job in writing. If something isn’t right, one call brings him back. No runaround.
For Hawthorne customers, that means a few things. First, we answer the phone. Not a voicemail, not a chatbot. A person. At 2 a.m. when your gate won’t open and you can’t get to work near Crenshaw Blvd, our Gate Repair in Hawthorne team makes sure you talk to a human. Second, we show up when we say we will. We know the streets, the alleys off Hawthorne Blvd, the apartment complexes along the main corridors, and the warehouses near Jack Northrop Ave. Scheduling and dispatch run from our Los Angeles office, and crews serve Hawthorne locally.
We carry parts for the systems Hawthorne actually uses. LiftMaster industrial slide operators near the aerospace corridor. FAAC commercial units on warehouse gates. Linear and Viking keypads on 1950s tract homes. BFT phone entry systems on older apartment buildings. When we roll up to a job in 90250 or 90251, we’re not guessing what’s behind the panel.
Our Gate Access Control Services in Hawthorne
Keypad Entry
A keypad that stops accepting codes in Hawthorne is usually one of two things: corroded wiring connections from months of marine-layer humidity, or a worn membrane from years of sun and grime. We replace keypads, rewire them with proper weather-sealed connections, and reprogram codes on site. For post-war homes in 90250 where the original gate opener is still in place, we match the new keypad to the existing operator rather than telling you to replace everything. A keypad replacement in Hawthorne typically runs $180-$320 depending on brand and wiring condition.

Remote Control
When a remote stops working, the fix isn’t always a new remote. On homes near the coast, the receiver board inside the operator often has corrosion on the antenna connection or the board contacts. We test the remote, the receiver, and the operator board separately. In Hawthorne’s older tract home neighborhoods, misaligned gates from corroded hinge posts strain operators and make remotes seem dead when the real problem is mechanical. We fix the actual cause. Remote and receiver repair runs $120-$280; replacement remotes are typically $45-$85 each.

Phone Entry
Phone entry systems on Hawthorne’s apartment complexes get heavy use, and the two failure points we see most are corroded terminal blocks and outdated cellular modules that no longer connect reliably. We repair existing phone entry hardware where possible, replace cellular modules, and wire in new systems when the old one is beyond saving. For complexes along Hawthorne’s main corridors with high tenant turnover, we can install systems that store codes locally and don’t depend on a phone line that hasn’t existed in the building for a decade. Phone entry repair typically runs $250-$600; full replacement runs $900-$1,800 per entry point.

Card Reader
Commercial card readers near the aerospace-industrial stretch on Jack Northrop Ave and Crenshaw Blvd see cycle counts that would kill a residential keypad in months. We service and replace card readers, wire new readers into existing operators, and troubleshoot the loop detectors and controllers that make the whole system work together. For businesses running LiftMaster industrial or FAAC commercial slide gates, our Hawthorne Gate Installation crews keep compatible readers and controllers in stock because waiting a week for a part means a gate that won’t open. Card reader replacement in Hawthorne runs $300-$700; full access control integration runs $1,200-$3,500 depending on the number of readers and the operator.

Loop Detector and Video Intercom
Loop detectors are the silent failure nobody notices until a truck pulls up and the gate won’t open. That’s especially common on Hawthorne’s industrial gates where asphalt cracks let moisture into loop wire. Our crew recently serviced a FAAC slide gate operator at a warehouse near Jack Northrop Ave after a failed loop detector caused erratic opening and handled the Gate Motor & Opener - Hawthorne repair on site. We replaced the loop detector, recalibrated the rack and pinion, and added a safety photocell to meet UL 325 entrapment protection. Video intercom systems, whether new or retrofit, need cameras positioned for Hawthorne’s sun angles and wiring sealed against the marine air. Video intercom installation runs $800-$2,200; repair runs $200-$500.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hawthorne
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hawthorne customers, we stock the parts those systems actually need here: FAAC and LiftMaster industrial slide operator components for the aerospace corridor, Linear and Viking residential keypads for 90250’s tract homes, and BFT phone entry boards for older apartment buildings. When a part isn’t on the truck, we can usually have it within a day because we know which suppliers serve the South Bay reliably. We don’t make Hawthorne customers wait for a part that a warehouse in Gardena already has.
Common Gate Access Control Problems We See in Hawthorne Homes
- Corroded operator boards and wiring connections. The Pacific is four to five miles away, and the marine layer that settles over Hawthorne from May through July keeps humidity elevated for months. Circuit boards corrode, terminals oxidize, and keypads stop responding. We replace boards and rewire connections with sealed, corrosion-resistant terminals made for coastal environments.
- Sagging gates from hinge post corrosion on 1950s-1970s tract homes. The original wrought iron gates on Hawthorne’s post-war homes are often mounted to posts that have been rusting in salt air for fifty years. A sagging gate misaligns the operator, strains the motor, and makes remote and phone entry unreliable. We repair the post and hinge first, then the access system. Fixing the panel without the post means you’ll fix it twice.
- High-cycle slide gate failures near Jack Northrop Ave and Crenshaw Blvd. Warehouse and aerospace facility gates open dozens or hundreds of times a day. Rack and pinion components wear, loop detectors fail, and operators burn out. These aren’t residential repairs. They need industrial parts, proper calibration, and someone who understands UL 325 entrapment protection. That’s what we do.
- Intermittent keypad and card reader failures during June Gloom. When the marine layer sits over Hawthorne for weeks, moisture finds every exposed wire nut, every unsealed connection, every board that wasn’t coated. Intermittent failures are the tell. By the time a system fails completely, the corrosion has usually been building for months. We trace the corrosion to its source and fix it so it doesn’t come back next May.
Pricing for Gate Access Control in Hawthorne, CA
Here’s what you can expect to pay for gate access control work in Hawthorne. Keypad entry replacement runs $180-$320. Remote and receiver repair runs $120-$280; replacement remotes $45-$85 each. Phone entry repair runs $250-$600; full replacement $900-$1,800 per entry point. Card reader replacement runs $300-$700; full access control integration $1,200-$3,500. Video intercom installation runs $800-$2,200; repair $200-$500. Loop detector replacement runs $250-$450. Every price is quoted and agreed before we start any work. No trip charge inside the county. Free second opinion on any written estimate. Seniors and veterans get 10% off, permanently. And $40 off any repair over $200. Call (877) 610-2993 for an exact quote, no haggling required.
We Also Serve Cities Near Hawthorne
If you’re in Del Aire, Inglewood, Lennox, or Lawndale, you’re within our normal service area, and the same 90-Day Done Right Promise applies. Many of our Hawthorne customers find us because a neighbor in Hawthorne recommended us, and the work doesn’t stop at the city line. The coastal corrosion issues we see in 90250 show up in Del Aire and Lawndale too, and the industrial gate needs near Jack Northrop Ave extend into Inglewood. We cover them all.
Serving Hawthorne, CA - Our Local Coverage Area
We’re based in the Hawthorne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hawthorne
Hawthorne sits four to five miles from the Pacific, and the marine layer that settles over the city, especially during May through July, keeps humidity high for weeks at a time. That salt-laden moisture corrodes operator circuit boards, wiring terminals, and keypad connections far faster than the drier air inland. A system that lasts ten years in Lawndale might develop intermittent failures in Hawthorne in five or six. The fix is using sealed, corrosion-resistant components and connections built for coastal conditions. Call (877) 610-2993 and we’ll assess what’s already corroded and what’s likely to go next.
Facilities along Hawthorne’s aerospace corridor need high-duty-cycle slide gate operators, usually LiftMaster industrial or FAAC commercial units, paired with card readers and loop detectors that handle dozens of cycles a day. The access control hardware itself should be rated for commercial use and wired with sealed connections. Loop detectors need to be properly calibrated for the specific gate and vehicle mix. We service these systems regularly along Jack Northrop Ave and Crenshaw Blvd, and we keep the parts in stock so a failed loop detector doesn’t shut a facility down for a week. For an exact recommendation, call (877) 610-2993.
Yes, and we do it regularly. Hawthorne’s post-war tract homes in 90250 often still have their original gate and operator from the 1950s, 1960s, or 1970s, and the access control systems are frequently obsolete by modern standards but still repairable. We repair keypad entry, phone entry, and remote systems on older operators where possible, rewiring with sealed connections and replacing only what’s failed. Where a repair isn’t cost-effective, we’ll tell you straight and quote a replacement that fits the existing gate and post. Call (877) 610-2993 and we’ll tell you what’s actually wrong before recommending anything.
We do. The older apartment complexes along Hawthorne’s main corridors have shared entry gates that see heavy use all day, and their phone entry and keypad systems fail regularly from a combination of high cycle counts and coastal corrosion. We repair existing systems, replace outdated cellular modules, and wire in new phone entry or keypad systems when the old hardware can’t be saved. We also handle the gate operators and safety edges that those systems control. For a complex in 90250 or 90251, call (877) 610-2993 and we’ll come assess the entry gate and the access hardware together, because that’s how the system actually works.
The June Gloom marine layer in Hawthorne keeps relative humidity elevated for months, and that moisture degrades rubber seals on hydraulic gate motors and weather stripping on operator housings. As seals crack and shrink, moisture gets inside the operator and accelerates corrosion on internal components. Swollen, cracked, or hardened rubber seals are a sign that moisture has been working on the system for months. We inspect seals during every access control repair and replace them with marine-grade materials that hold up better in Hawthorne’s coastal air. Call (877) 610-2993 and we’ll check yours before the next June Gloom season.
If your gate access control in Hawthorne is acting up, or you want a system that survives salt air without constant repairs, call (877) 610-2993 for a free estimate. A live person answers. Hal’s name is on the shop, the invoice, and the 90-Day Done Right Promise. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gate Access Control in Hawthorne since 2001.





Before
After
Before
After
Before
After