Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Lawndale, CA
Gate repair in Lawndale runs between $180 and $620 for most electric and automatic driveway gate failures, and we can usually have someone at your property within a couple of hours. What makes Lawndale different is the combination of salt air from the Pacific and the high volume of 1960s and 70s apartment complexes here. Those two factors mean we see corrosion-driven failures and duty-cycle wear in Lawndale that inland cities just don’t deal with the same way. Call (877) 610-2993 and a live person picks up, day or night.
Why Lawndale Homes Are Different
Lawndale packs a lot of apartments into just over two square miles. That changes the job completely. The gates we repair here are mostly heavy-cycle sliders and swing gates serving dozens of tenants a day, not the occasional single-family driveway gate you’d see in a sprawling suburb. Those gates cycle hundreds of times a week, and that wear shows up in latch strikes, operator gears, and hinge pins before you’d ever see it on a gate that opens twice a day.
Layered on top of that, Lawndale sits roughly three miles from the Pacific and squarely in the South Bay marine layer corridor. Salt-laden moisture pushes inland through the 90260 and 90261 ZIP codes all year, settling on metal gates and eating through wrought iron faster than in Gardena or other inland neighbors. Along Prairie Avenue we regularly encounter original 1960s slide gates where the bottom rail has corroded through right at the concrete track, where shaded driveway moisture never fully dries. That’s a Lawndale-specific failure pattern, and it usually calls for full rail replacement rather than a hinge swap or a new operator.
Older post-WWII homes and apartment slabs that have heaved and shifted over decades add another layer. When a gate post leans even half a degree, the latch misses, the gate drags, and the automatic operator burns itself out trying to push through resistance. You can’t fix that by swapping the motor.
Gate Repair in Lawndale
Most gate repairs in Lawndale fall between $180 and $620, and the deciding factors are usually the type of gate, where the failure happened, and how long the marine layer has been chewing on the hardware. We diagnose the whole system rather than just the part that stopped. A gate that blows a fuse twice a month usually has a corroded contact upstream, not a bad board. Every repair comes with a written price agreed before work starts, no trip charge inside the county, and our 90-Day Done Right Promise in writing. That’s the same promise Hal has put on every invoice since he started.
For more detail on how we approach repairs across every gate type, see our Gate Repair page.
Electric Gate Repair
Lawndale’s apartment buildings are full of electric slide gates that cycle thirty or forty times a day, every day. That kind of duty wears out limit switches, circuit boards, and safety loop detectors far faster than a single-family driveway gate in a quiet cul-de-sac. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and repairs usually land between $280 and $620 depending on whether we’re replacing a limit switch, a circuit board, or a full motor.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Lawndale, we see a lot of original 1950s and 60s wrought iron posts set in concrete that has heaved and shifted over seven decades. When the post leans, the latch misses, the gate drags, and the operator fights the misalignment until something breaks. A hinge replacement or basic latch repair typically runs $150 to $280. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Along the apartment corridors near Prairie Avenue, constant use plus settled concrete produces gates that drift out of alignment within months, not years. A gate that closes hard against the receiver post or scrapes the bottom rail is telling you something. We re-level the gate, rebuild the track or roller assembly as needed, and then test it through a full open-close cycle with the operator attached, not just by hand. Gate realignment with track or roller work lands between $220 and $450. Show me the gate closing on its own and I’ll show you where it’s failing.
How much does gate repair cost in Lawndale?
Most gate repairs in Lawndale run $150 to $620 depending on the failure. Hinge or latch work starts around $150, realignment lands between $220 and $450, and electric operator repairs reach $620. The real wildcard is a corroded bottom rail on an old slide gate: that full rail replacement can hit $750 to $1,100. Every price is written and agreed before work starts. Call (877) 610-2993 for an exact quote, estimates are free.
Can you come to Lawndale today if my gate won’t open?
Yes, in most cases. We keep a crew routed through the South Bay every weekday, so we can typically reach any Lawndale address within one to two hours of your call. Emergency calls are answered live 24/7 at (877) 610-2993. You’ll get a real window on the phone, not a four-hour “we’ll see” that never happens.
Gate Installation in Lawndale
Gate installation in Lawndale runs between $1,150 and $4,800 for most residential and light-commercial jobs, depending on whether we’re setting a new sliding driveway gate in cast concrete, hanging a double swing gate on existing posts, or building a full security gate with an automated opener. The marine layer here changes the hardware spec. We install corrosion-rated components as standard, because what lasts a decade inland will seize in four or five years in the 90260 and 90261 ZIP codes. Every installation is quoted in writing before work begins, and that number doesn’t change at the door.
For more detail on how we approach installations, see our Gate Installation page.
Driveway Gate Installation
Most of the driveway gates we install in Lawndale are sliding gates, especially in the multi-unit properties along Prairie Avenue and near Hawthorne Boulevard. A sliding gate sits on a concrete track, and in Lawndale that track gets showered with salt-laden moisture every morning. We pour the track with a proper slope so water doesn’t pool at the rail, which is what kills the bottom rail on so many older gates here. A typical driveway gate installation in Lawndale runs $1,800 to $4,200.
Pedestrian Gate Installation
Pedestrian gates in Lawndale tend to be the workhorses of the property. In the 1960s and 70s apartment buildings near the 105, dozens of tenants cycle through the same walk gate every single day. We install pedestrian gates with heavier-duty hinges and stainless hardware when we can see the daily cycle count is going to be high. Pedestrian gates generally run $1,150 to $1,850 installed.
Swing Gate Installation
Swing gates are simpler mechanically but they demand precision. In Lawndale’s older single-family neighborhoods, many original posts are set in concrete that has shifted over decades. We pull posts, re-set them with proper depth, and hang the gate so it sits square day one. Single swing gates run $1,500 to $2,600, and double swing gates for wider driveways land between $1,800 and $3,800 depending on width and material.
What does a full gate installation in Lawndale include?
A full installation includes removal of the old gate, new post footings where needed, the gate itself welded on site, hinges or the track system, and the labor to set it square. If you’re adding an opener or access control, we quote that separately. Every job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 for a free measure and written price.
Is gate installation in Lawndale more expensive than nearby cities?
Pricing is in line with the rest of the South Bay. What changes is the hardware spec. Because the marine layer pushes salt moisture into metal constantly here, we install corrosion-rated hardware that some inland contractors might skip. That adds a small amount upfront but saves you from replacing seized hinges and corroded rails five years from now. Call (877) 610-2993 for an exact quote, estimates are free.
Gate Motor & Opener in Lawndale
When a gate motor quits on Hawthorne Boulevard or Prairie Avenue, you don’t have time to sit on hold. Gate motor and opener repair in Lawndale typically runs $180 to $520 depending on the failure, and most jobs are finished the same day we arrive. The marine layer off the coast means oxidized electrical contacts and corroded terminal blocks are routine here, not rare. That’s often good news, because cleaning and re-terminating a connection costs a fraction of what a new motor costs.
For more detail on how we approach motors and openers, see our Gate Motor & Opener page.
Motor Repair
Repair beats replacement more often than people assume. We’ve pulled apart DoorKing and Viking operators in Lawndale that other companies condemned, found a corroded limit switch or a seized capacitor, and had them running again for under $250. Most motor repairs run $180 to $520. Hal fixes what’s broken and leaves what isn’t. That’s the whole philosophy at Gatewood Fence & Gate.
Motor Installation
A new motor in Lawndale usually runs $850 to $1,800 installed, depending on the gate’s weight, swing, and whether we’re converting a manual gate or replacing a dead operator. Multi-tenant properties here almost always need a heavier-duty unit than a single-family home, because the gate might cycle 80 times before noon. Before any new motor goes in, we check the post alignment, the hinge wear, and the concrete condition. A motor mounted on a gate that’s already sagging fails twice as fast. We measure, quote, and schedule.
Slide Motor
Slide gates dominate the multi-family corridors near Prairie Avenue, and those motors take a beating from both traffic and moisture. A slide motor replacement in Lawndale generally falls between $700 and $1,400 installed. The failure pattern we see most often on original 1960s wrought iron slide gates is the bottom rail pitting and corroding where it meets the concrete track. That grinds the motor down, burns through gears, and eventually kills the operator. If the rail’s gone, we weld a new section on site. If the motor’s the casualty, we match the existing brand and duty rating.
Can you fix my existing motor instead of selling me a new one?
That’s the default. Hal repairs the gate in your driveway rather than swapping parts that don’t need swapping. We’ve saved Lawndale property owners thousands by replacing a $20 capacitor or a $40 limit switch instead of condemning a perfectly good operator. If the motor is genuinely beyond repair, we’ll show you the failed part and explain why before quoting a replacement. Call (877) 610-2993 for a free diagnostic, waived if you approve the repair same visit.
How fast can you respond to a gate motor emergency in Lawndale?
We respond to Lawndale the same day in most cases, and emergency calls are answered live 24/7. Most single-motor repairs are finished within two hours of arrival. If you’re in the 90260 or 90261 ZIP codes, you’re a short run for us. Call (877) 610-2993 for today’s availability.
Gate Access Control in Lawndale
Gate access control work in Lawndale is driven by the apartment density. Multi-tenant buildings need keypads, intercoms, and phone-based entry systems that survive daily use from dozens of residents and their visitors. That’s a different duty cycle than a single-family keypad. The marine layer adds another layer: oxidized terminals and corroded relay contacts on entry boards are common within a few blocks of the coast. We service Ghost Controls, DoorKing, and Linear access systems among others, and repair work for control boards and access systems typically runs $300 to $700.
For more detail on how we approach access control, see our Gate Access Control page.
Keypad & Intercom Repair
Keypads at Lawndale apartment complexes get pounded daily, and the buttons or the weather seal usually go first. Salt moisture finds its way into the housing and corrodes the contact traces. We repair or replace the keypad, re-terminate the wiring, and seal the unit against the marine layer. Most keypad repairs range from $250 to $550.
Telephone Entry Systems
Telephone entry systems at multi-tenant properties along Prairie Avenue and Hawthorne Boulevard get constant use from delivery drivers, visitors, and tenants who forgot their fob. We integrate the entry system with the existing gate operator, which means checking the wiring between the call box and the control board. Repair work typically runs $300 to $700 depending on the system. Installations vary based on the number of units, and we quote those in writing before any work starts.
How much does gate access control repair cost in Lawndale?
Access control repair in Lawndale generally runs $300 to $700 depending on whether we’re repairing a keypad, a control board, or a telephone entry system. If the operator itself needs work, that’s a separate repair. Every price is written and agreed before work starts. Call (877) 610-2993 for a free estimate, and we’ll quote you a firm number on the phone.
Do you handle the electrical wiring and safety edges on automatic gates in Lawndale?
Yes. We handle the full electrical run from the panel to the operator, including safety edges, photoelectric sensors, and loop detectors. Salt air in the South Bay marine layer makes corrosion on these connections routine, so we re-terminate and seal everything rather than just swapping the failed part. Call (877) 610-2993 for an exact quote.
Gate Parts & Welding in Lawndale
Gate parts and welding in Lawndale usually fall between $220 and $500 for weld repairs and $150 to $400 for parts replacement, depending on how far the corrosion has gone. We do the work on site, in your driveway, so the gate never leaves your property. That matters in Lawndale, where a heavy wrought iron slide gate off a 1960s apartment building is not something you want hauled across town on a flatbed. Hal welds it back square right where it sits.
For more detail on how we approach parts and welding, see our Gate Parts & Welding page.
Weld Repair
Cracked frames, broken brackets, and snapped hinge welds are common on Lawndale’s older iron gates. Salt-air oxidation weakens the metal over the years, and the constant cycling of apartment gates eventually cracks what the rust started. Weld repair on a cracked frame or broken bracket runs $220 to $400. We grind out the old weld, clean the metal, and weld it back solid.
Bottom Rail Replacement
Along the dense apartment corridors near Prairie Avenue, we regularly encounter original 1960s wrought iron slide gates where the bottom rail has corroded through right at the concrete track. That’s a Lawndale-specific failure pattern, and a patch won’t hold. We cut out the rusted section and weld in new steel, then coat the rail against the moisture that caused the problem in the first place. Full bottom rail replacement runs $350 to $650.
Can you weld my gate on site in Lawndale rather than hauling it off?
Yes. We bring the welding rig to your driveway, so the gate stays put. That’s how Hal has worked since 2001: fix the gate in your driveway, not on a truck. We’re certified to service parts for Ghost Controls, DoorKing, Linear, and Viking among others. Call (877) 610-2993 and we’ll tell you over the phone whether it’s a weld job or something else.
Do you carry gate parts in Lawndale or do I have to wait?
We carry common parts in our trucks: hinge pins, latch strikes, limit switches, capacitors, and rollers. For brand-specific parts like a DoorKing control board or a Linear actuator, we can usually source it same day or next day. Most weld and hardware repairs are finished in one visit. Call (877) 610-2993 for today’s availability.
Brands We Service in Lawndale
We service DoorKing, Linear, Ghost Controls, and Viking operators and access equipment, along with most other major brands on the market. Parts stocking depends on the failure, but we carry the common components that fail most often in coastal climates: limit switches, capacitors, and terminal blocks. You can see the full list on our brands page.
Pricing for Gate Repair in Lawndale, CA
| Service | Typical range in Lawndale |
|---|---|
| Hinge or latch replacement | $150 - $280 |
| Gate realignment with track or roller work | $220 - $450 |
| Electric / automatic operator repair | $280 - $620 |
| Weld repair (cracked frame, broken bracket) | $220 - $400 |
| Bottom rail replacement (corrosion) | $350 - $650 |
| Full bottom-rail weld replacement on 1960s slide gate | $750 - $1,100 |
| Linear actuator replacement | $490 - $900 |
| Slide motor replacement | $700 - $1,400 |
| New motor installation (complete) | $850 - $1,800 |
| Control board or access system repair | $300 - $700 |
What pushes the price up in Lawndale is almost always the marine layer. Corroded bottom rails on shaded slide gates, seized hinges, and oxidized electrical contacts mean more fabrication and more welding than an inland job would require. The price per task stays the same across Los Angeles County. What changes is the scope. Every price is quoted in writing and agreed before any work starts, with no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Lawndale
Lawndale is small, just over two square miles, so there’s no corner of the city we don’t reach. We work the apartment corridors near Prairie Avenue, the single-family streets off Marine Avenue, and everything in between. Typical response time for emergency repairs is the same day, often within a few hours when the call comes in before noon.
- Central Lawndale near City Hall and the Civic Center
- Apartment corridors along Prairie Avenue and Inglewood Avenue
- Neighborhoods adjacent to Alondra Park and the 405
- Single-family pockets near William Green Elementary and Lawndale High
- Residential streets west of Hawthorne Boulevard
Service Area - Cities Near Lawndale
If you’re in Lawndale, CA or any of the surrounding South Bay communities, we’re close by. We also serve Marina del Rey, CA, Hawthorne, CA, Del Aire, CA, Alondra Park, CA, and Inglewood, CA. There’s no trip charge inside the county for any of these areas.
Serving Lawndale, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lawndale and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Lawndale coverage area; if your address is on it, we can help.
Also serving nearby: Lawndale, CA, Marina del Rey, CA, Hawthorne, CA, Del Aire, CA, Alondra Park, CA, Inglewood, CA.
FAQs About Gate Repair in Lawndale
We respond to Lawndale the same day in most cases, and emergency calls are answered live 24/7 at (877) 610-2993. Most single-motor repairs are finished within two hours of arrival. Lawndale is compact, just over two square miles, so once the truck is in the area every address is a short run. Call us for today’s availability.
Most gate repairs don’t require a permit in Lawndale, because we’re not changing the structure. When we do need to pull a permit, typically for a new concrete footer or a post re-set in certain situations, we’ll handle that process and tell you upfront. Call (877) 610-2993 and we’ll walk you through what’s required before anything gets scheduled.
Do you work with Lawndale HOAs and apartment property managers?
Yes, that’s a big part of what we do in Lawndale. Multi-tenant properties with heavy-cycle gates are the majority of our calls here, so we’re used to working with property managers, HOA boards, and the documentation those jobs require. Every quote is in writing, and every job carries the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate with no trip charge inside the county.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lawndale Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu





Before
After
Before
After
Before
After