Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Florence-Graham
If your gate sags, drags, or won’t latch in Florence-Graham, the fix usually comes down to a hinge, a post, a welded rail, or a worn roller. We handle all four, and we do the work at your property, not in some far-off shop. A typical hinge replacement in Florence-Graham runs $180-$320, and most post replacements land between $450 and $900 depending on footing condition. The person who answers your call at (877) 610-2993 is a live human, 24 hours a day, and the person who shows up carries our 90-Day Done Right Promise in writing.
Gatewood Fence & Gate has been owner-operated since 2001. Hal Gatewood’s name is on the shop, and crews serve Florence-Graham from our Los Angeles office. That means no call center, no faceless national subcontractor, and no estimate that changes when we reach your driveway. The price is quoted and agreed before any work starts.
Why Gatewood Fence & Gate Is Florence-Graham’s Preferred Gate Parts & Welding Company
Florence-Graham is unincorporated LA County, which means gate permits, code enforcement, and inspection authority fall under the LA County Department of Regional Planning, not a municipal building department. A lot of gate companies that work the incorporated cities around here, Huntington Park and South Gate included, don’t understand how that changes a repair. We do. It changes which parts are legal to weld, how a post footing has to be set, and whether an old opener can be serviced at all without a compliance correction first.
We’re locally owned, state-licensed, insured, and bonded. Hal has been doing this since 2001, and his crews are background-checked and uniformed. Call the number, and you get a live person, not a voicemail tree. That matters at 2 a.m. when a Santa Ana wind event racks your gate off its hinges and you can’t close your driveway. Local customers in the 90001 ZIP tell us the same thing: they’d rather pay fair money once than get burned twice by someone who quotes low on the phone and shows up with a different number.
Every job carries the 90-Day Done Right Promise, stamped in writing. If it’s not done right, one call brings us back. No runaround, no fine print. That’s the oldest kind of accountability there is. The name is on the shop, and the shop is down the road.
Our Gate Parts & Welding Services in Florence-Graham
Our Gate Parts & Welding team handles the repairs that other companies want to replace. We weld on site, in your driveway, so the gate never leaves your property. Here are the four services we perform most often in Florence-Graham.
Hinge Replacement
Most Florence-Graham driveway gates were installed between the 1940s and 1960s. The hinges are original, and they’re tired. When a hinge wears, the gate drops at the latch side and drags across the concrete. We cut out the old hinges, weld in new barrel or weld-on hinges rated for the gate’s weight, and re-hang it straight. On ornamental iron from this era, we often have to grind through decades of paint buildup just to reach clean metal.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Florence-Graham’s low-humidity, high-UV conditions, posts rust specifically at the buried base, right where they enter the concrete footing. You won’t see the damage from the surface until the post starts leaning. We cut out the old post, pour a new footing to LA County standards, set a new steel post, and weld the gate back on. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Decades of piecemeal welded repairs leave Florence-Graham gates with mismatched pickets, cracked rails, and heavy paint buildup hiding the real damage. Santa Ana winds find those weak spots. We cut out the failed section of rail, weld in new square or round tube stock matching the gate’s profile, and grind the joint smooth. When the existing rail is too far gone, we fabricate a full replacement bottom or mid rail on site.
Custom Welding
The lots in Florence-Graham are tight, 25 to 40 feet wide, so driveway gate openings are almost never a standard size. Off-the-shelf panels don’t fit. We fabricate custom gate frames, extend existing gates, build matching pedestrian gates, and weld up security screens. Whether you need a custom-fitted replacement section or a complete gate built to a non-standard 9-foot opening, we measure, cut, and weld at your property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florence-Graham
We’re certified to service nine major gate brands, and we keep parts stocked for the ones we see most in the 90001 ZIP: Viking, DoorKing, and Ghost Controls. If your Florence-Graham gate has an older Viking operator that’s been running since the 1990s, or a DoorKing board that’s given up, we can usually source the part same week and install it the day it arrives. For legacy openers that are no longer manufactured, we’ll tell you honestly whether a retrofit is safe and cost-effective or whether replacement is the cheaper answer.
We service Florence-Graham and the surrounding communities with the same live-person response and written guarantee.
Common Gate Parts & Welding Problems We See in Florence-Graham Homes
- Hinge posts rotting inside the original footing. The low humidity and strong UV here don’t rust exposed iron quickly, but moisture trapped at the buried base of a post does steady damage you can’t see. Sag correction jobs fail again when the footing isn’t replaced, which is why we always inspect what’s below grade before welding anything above it.
- Mismatched pickets and cracked rails hidden under paint. Past owners welded in whatever scrap iron was handy. The gate looks fine until a Santa Ana wind event loads it sideways, and the old cracked rail lets go. We see this pattern constantly on 1940s and 1950s ornamental gates in Florence-Graham.
- Legacy openers wired directly into residential panels. Because this community is unincorporated, a lot of automatic slide and swing gate operators were installed without LA County electrical permits or proper UL-listed disconnects. Liability exposure falls on the contractor who services an unpermitted installation, so we check compliance before touching the opener, not after.
- Missing UL 325 entrapment protection. Older swing gates in Florence-Graham are frequently missing the safety photocells and reversing edges that incorporated neighbors in Huntington Park or South Gate are more likely to have retrofitted. That’s a safety issue, not just a code issue. Show me the gate closing on its own and I’ll show you where it’s failing.
Pricing for Gate Parts & Welding in Florence-Graham, CA
Here’s what we’re charging in Florence-Graham right now, and every price is quoted and agreed before any work begins:
- Hinge replacement: $180-$320 per hinge, including grinding, welding, and re-hanging the gate
- Post replacement: $450-$900 per post, depending on footing condition and post size
- Rail repair: $150-$400 per rail section, including cutting out the failed section and welding in new steel
- Custom welding: $90-$150 per hour plus materials, quoted in writing before we strike an arc
Two things affect cost more than anything else in Florence-Graham: the condition of the original footing and how much paint and old weld material we have to remove to reach clean steel. We’ll tell you both before we start. We offer free estimates, no trip charge inside the county, and a free second opinion on any written estimate from another contractor. Right now, take $40 off any repair over $200. Seniors and veterans always get a permanent 10% discount.
We Also Serve Cities Near Florence-Graham
We work throughout this part of LA County, including Huntington Park, Walnut Park, Willowbrook, and South Gate. If you’re in one of those cities and your gate needs a welded repair, a new hinge post, or a compliance check on an old opener, call the same number and ask for Hal. Same live person, same written guarantee.
Serving Florence-Graham, CA - Our Local Coverage Area
We’re based in the Florence-Graham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Florence-Graham
In Florence-Graham, the answer is usually yes, because this is unincorporated LA County and the LA County Department of Regional Planning has authority over gate permits, not a city building department. A like-for-like hinge replacement on an existing gate typically doesn’t trigger a permit, but setting a new post, changing the gate’s footprint, or modifying a driveway opening often does. We’ll check the specifics of your job before any work starts and let you know whether we need to pull a permit. Call (877) 610-2993 and we’ll walk you through it, no charge for the conversation.
The panel probably isn’t the problem. A gate sags in the hinge post, not in the middle. In Florence-Graham, where most gates date from the 1940s through the 1960s, the hinge post has usually rusted at its buried base, inside the original concrete footing. The gate then drops at the latch side and drags. We cut out the old post, pour a new footing, set new steel, and re-hang the gate with new bearings. Welding a patch onto the panel without fixing the post just buys you a few months.
Usually yes, and we do it regularly in Florence-Graham. The gate itself has to be structurally sound first, straight, with good hinges and a solid post. We’ll assess the frame, then install a modern UL 325-compliant operator with proper safety photocells, a reversing edge, and a UL-listed disconnect if the panel allows. Most 1950s gates can be retrofitted; a few are too far gone. We’ll tell you which one you have before we quote the work.
Because liability exposure falls on the contractor who services an unpermitted installation, and in the 90001 ZIP, legacy gate operators wired directly into residential panels without LA County electrical permits or proper disconnects are common. If we touch it, we own it. So we check the disconnect, the circuit, and the permit status first. If there’s a compliance issue, we’ll tell you what it is and what it costs to correct, in plain numbers, before any repair starts.
Look for three signs: a gate that drags at the latch side, hinge pins that have visible play when you lift the gate, and rust staining running down from the hinge barrel. In Florence-Graham’s climate, hinge failure is usually at the weld, where moisture and UV have worked the joint for decades. If you can move the gate up and down by hand at the hinge side, the hinge is done. Call us before it drops completely: (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts & Welding in Florence-Graham
If your Florence-Graham gate is sagging, rusted, or missing the safety gear it should have had all along, call Hal at (877) 610-2993. You’ll get a live person, an honest assessment, and a written quote before any work starts. We weld on site, we stand behind every job with the 90-Day Done Right Promise, and we’re down the road, not three states away. Free estimates, no trip charge inside the county, and a live answer any hour you call.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Florence-Graham and surrounding LA County since 2001.