Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Florence-Graham
A new driveway or pedestrian gate in Florence-Graham typically runs $1,800 to $6,500 installed, depending on whether we’re building an ornamental iron swing gate, a sliding gate, or a full security gate with automation. Most installations in the 90001 ZIP are custom-fitted to narrow, non-standard openings on lots built in the 1940s through 1960s, so we measure on site before we quote a cent. Hal Gatewood has been at this since 2001, and he’ll be the one walking your property and telling you straight what needs replacing and what’s worth saving. Call us at (877) 610-2993 and a live person answers, day or night.
Florence-Graham is unincorporated LA County, which means gate permits flow through the LA County Department of Regional Planning, not a city building department. That distinction trips up out-of-area contractors all the time. It doesn’t trip us up. We file the paperwork, we schedule the inspection, and we don’t leave a mess behind.
Why Gatewood Fence & Gate Is Florence-Graham’s Preferred Gate Installation Company
We’re not a franchise and we’re not a dispatch service. Hal Gatewood has been locally owned and owner-operated since 2001, with his name on the shop and on every invoice. When you call about Gate Installation, you talk to a person who has actually built gates in Florence-Graham, not someone reading a script three states away. That matters here more than most places, because Florence-Graham’s unincorporated status and its older housing stock create permit and retrofit situations that a national outfit simply doesn’t understand.
Our customers in Florence-Graham know that the 90-Day Done Right Promise is written on every job, not buried in fine print. If something isn’t right, one call brings Hal back. No runaround. The crew that shows up is background-checked and uniformed, and we answer the phone 24/7 with a live person. In an area of the 90001 ZIP where gates were often hung decades ago without county approval, having a contractor who understands LA County Department of Regional Planning code enforcement is the difference between a smooth install and a notice on your door.
We carry standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You’ll know the price before we start, and that price won’t change when we’re done.
Our Gate Installation Services in Florence-Graham
Florence-Graham’s lot geometry drives almost every gate decision here. Narrow 25 to 40 foot wide lots mean driveway gates are almost never off-the-shelf. We build to the opening, not the other way around. Here’s what we install most in this community:
Driveway Gate
A driveway gate in Florence-Graham is usually the primary physical barrier between the street and a converted multi-family property or a single-family home with a long, narrow driveway. We install ornamental iron, steel, and aluminum driveway gates sized to your exact opening, with operators built for daily cycling. Because so many original gates here were custom-fit but never engineered, we check post footings before we hang anything. A gate sags in the hinge post, not in the middle, and that is where we start.
Pedestrian Gate
Nearly every parcel in Florence-Graham has at least one ornamental iron pedestrian gate, and a large share of those were installed informally without county permits. We install new pedestrian gates that meet current LA County setback and height requirements, and we can retrofit an existing gate with a modern latch, closer, or keypad entry. If your walk gate has been welded three times and still drags on the concrete, we’ll tell you honestly whether it’s worth saving.
Sliding Gate
Sliding gates make sense on Florence-Graham lots where a swing gate would eat half the driveway. But the flat basin geography and periodic Santa Ana winds put real stress on rack-and-pinion systems. We’ve pulled stripped racks off slide gates where the teeth had been chewed down over years of wind racking and the track had shifted in the concrete. We install sliding gates with heavy-gauge track, proper wheel carriages, and operators that hold up to 90001 conditions.
Swing Gate
Double and single swing gates are the most common installation we do for Florence-Graham homeowners between 50 and 70 who want a gate that matches the original character of their post-WWII home. We build swing gates with the weight distributed to the hinge post, not the panel, and we set footings deep enough for the actual gate, not the gate somebody wishes they had. When we replaced a badly sagging swing gate on a 1948 home in the 90001 ZIP, the original ornamental iron panel was salvageable, but the hinge post had rotted through at the base. We pulled a new post footing, hung the panel square, and paired it with a UL 325-compliant operator, then filed the LA County permit. That’s the job done right, not just done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florence-Graham
We’re certified to service and install nine major gate brands, including FAAC, BFT, Linear, and Viking. That covers most of the legacy equipment still running in Florence-Graham, including old Linear operators from the 1990s that get wired directly into panels without a disconnect. We stock common parts for these brands locally, which means we’re not waiting a week on a control board when your gate is stuck open. If your operator predates modern entrapment protection and a board swap isn’t enough to bring it to code, we’ll tell you that plainly and show you the replacement cost before any work starts.
Common Gate Installation Problems We See in Florence-Graham Homes
Florence-Graham has a specific set of gate problems that we see over and over. They’re tied to the age of the housing stock, the lot sizes, and the unincorporated county permitting situation:
- Sagging panels torn from hinge posts. The original post footing was poured too shallow for the gate’s weight, common on narrow lots where gates were custom-fit but never engineered. The fix is a new post with a deeper footing, not another weld on the hinge.
- Obsolete control boards on legacy operators. Many old operators in Florence-Graham lack entrapment protection entirely. When retrofitting isn’t possible, we replace the operator rather than swapping boards, and we install the required safety photocells and edges at the same time.
- Rack and pinion slide-gate systems with stripped teeth. Decades of Santa Ana wind racking has shifted tracks in the concrete and chewed the teeth off the rack. The gate no longer runs true, and forcing it damages the operator.
- Unpermitted electrical wiring into the gate operator. In the 90001 ZIP, automatic slide-gate and swing-gate operators wired directly into residential panels without LA County electrical permits are common. A compliance check is our standard first step before any opener repair, because the liability falls on the contractor who services an unpermitted installation.
Pricing for Gate Installation in Florence-Graham, CA
| Gate Type | Typical Installed Range in Florence-Graham |
|---|---|
| Pedestrian gate (ornamental iron, manual) | $900 - $2,200 |
| Driveway swing gate (single, manual) | $1,800 - $4,000 |
| Driveway swing gate (double, automated) | $4,500 - $7,800 |
| Sliding gate (automated, with operator) | $5,000 - $9,500 |
| Security gate (steel, with access control) | $6,500 - $14,000+ |
These ranges reflect what we actually quote in Florence-Graham. The big variables are gate width, material weight, operator brand, whether we’re reusing your existing posts, and whether LA County permit and inspection fees are baked in. A typical ornamental iron swing gate with a FAAC or LiftMaster operator on a 12 to 14 foot opening lands around $5,000 to $6,500 all in. You’ll get a written price before any work starts, agreed to in advance. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Florence-Graham
If you’re in Huntington Park, Walnut Park, Willowbrook, or South Gate, we cover those areas too. Gate Installation in Florence-Graham is our home base for this part of the county, but the same crew and the same 90-Day Done Right Promise apply across the neighboring ZIP codes.
Serving Florence-Graham, CA - Our Local Coverage Area
We’re based in the Florence-Graham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Florence-Graham
Yes, for most driveway gate replacements and new installations in Florence-Graham, you need a permit from the LA County Department of Regional Planning, not a city building department, because Florence-Graham is unincorporated. We file the permit, schedule the inspection, and handle any retroactive permitting if an old gate was hung without county approval. Call (877) 610-2993 and we’ll check your specific address.
If your operator was installed before about 2016, it likely lacks the UL 325 entrapment protection that current law requires, which means it may reverse unexpectedly or fail to stop on a child or pet. We do a compliance check as a standard first step on every opener call in Florence-Graham, and we’ll tell you honestly if a retrofit is possible or if replacement is cheaper. Call (877) 610-2993 for a free on-site evaluation.
Yes, in most cases the original ornamental iron panel from the 1940s or 1950s is well worth saving in Florence-Graham, and we’ll build new posts with deeper footings to carry it. The panel itself is often solid; it’s the post footing and hinge hardware that failed. We’ll weld on site, hang the panel square, and keep the character of your home intact. Call (877) 610-2993 for a free estimate.
Florence-Graham sits in the flat inland South LA basin where Santa Ana winds hit damaging speeds and rack lighter gate frames off their tracks, while decades of shifting soil and concrete has moved the original track out of true. That combination strips rack teeth and kills operators faster than it does in coastal ZIP codes. We install slide gates with heavier track, proper carriages, and wind-bracing sized for 90001 conditions. Call (877) 610-2993 for a free quote.
No, a gate operator wired directly into your panel without a proper disconnect means it was almost certainly installed without an LA County electrical permit, and it’s a safety hazard and a liability risk. We check this on every opener job in Florence-Graham because it’s common here, and we’ll bring the installation to code before we service the operator. Call (877) 610-2993 for a free on-site compliance check.
Call Gatewood Fence & Gate for Gate Installation in Florence-Graham
If you live in Florence-Graham and your gate has been hanging crooked since the last big wind, or you’re ready for a new security gate and want it permitted properly through LA County, give Hal a call at (877) 610-2993. You’ll get a live person on the line, a free estimate, and a written price before any work begins. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Florence-Graham since 2001.