Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Denver
Gate parts and welding in Denver usually means one of two calls: either a hinge post heaved out of plumb over the winter and dropped your gate onto the concrete, or a heavy spring snow bent a hinge and now the gate won’t latch. Either way, we fix it on site, and we fix it the same day in most Denver ZIP codes. Hal Gatewood has been welding gate hardware in driveways since 2001, and in central Denver neighborhoods like Baker and Capitol Hill, the freeze-thaw cycle keeps us busy every March. Call (877) 610-2993 and you’ll get Hal or someone from his crew, not a voicemail.
This page covers what Denver homeowners actually deal with: alley gates that share posts with the neighbor, period wrought-iron hinges nobody stocks anymore, and gates that worked fine in October but won’t close by April. We serve every ZIP code in central Denver and the surrounding cities, and our Gate Parts & Welding in Denver work comes with a 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Denver’s Preferred Gate Parts & Welding Company
We’re local. Our Denver office coordinates every job, and the person who answers your call knows the difference between a post footing problem in Baker and a roller track problem in Cheesman Park. Nobody reads you a script. Nobody quotes one price and shows up with another.
Hal Gatewood has been at this since 2001, and his name is on the shop, the invoice, and the truck. That matters in Denver because most of the central neighborhoods are old construction. We’re talking wrought iron from the 1890s, wooden gates from the 1920s, and hinge hardware that predates modern sizing by decades. The national outfits don’t stock parts for a gate built when Denver had streetcars. We do, and if we don’t have the part, we weld one on site.
Calls are answered by a live person 24 hours a day, seven days a week. Not a chatbot, not a call center three states away. When you call about a gate that won’t close in a Denver alley, you’ll talk to someone who knows what a Denver alley looks like.
Our Gate Parts & Welding Services in Denver
Our Gate Parts & Welding team handles everything from a single hinge replacement to a full post rebuild with custom fabrication. Here’s what we see most in Denver:
Hinge Replacement
Denver’s clay soil heaves hinge posts out of alignment every spring, and a gate that drifts 5 to 10 degrees off plumb will grind its latch and twist its hinges. We cut out the old hinge and weld in new hardware matched to your gate’s original dimensions, including period wrought-iron styles from Capitol Hill and Cheesman Park homes. Hinge replacement in Denver typically runs $120 to $260 per hinge, depending on the gate weight and whether we’re repairing the post at the same time.
Post Replacement
When a gate post leans, the gate sags from the post, not the middle. Swapping out the panel without fixing the post means you’ll fix it twice. We cut out the old post, pour a deeper footing with gravel drainage at the base to slow the heave cycle, and set a new steel post plumb. For alley-facing gates in Baker and Curtis Park, you’ll usually be back to working order the same day. Post replacement in Denver averages $350 to $600 for a standard swing gate post, more if neighbor access or shared posts are involved.
Rail Repair
Heavy wet spring snow in Denver loads up gate frames with hundreds of pounds in a few hours. That’s when top rails buckle, weld points crack, and wood panels split. We weld cracked steel and iron rails on site, and we can reinforce an older frame rather than telling you to buy a new gate. Rail repair in Denver generally runs $90 to $180 per weld point, including cleanup and paint touch-up.
Custom Welding
This is the part of the trade Hal genuinely enjoys. Pre-standard wrought-iron hardware from Denver’s late Victorian and Craftsman building stock doesn’t match modern off-the-shelf parts. We weld new hinge straps, rebuild missing scrollwork, fabricate latch mounting plates, and extend gate frames right in your driveway. Because we weld on site, your gate never leaves your property. Custom welding in Denver typically runs $70 to $120 per hour plus materials, and you’ll get a written quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Denver
Denver homeowners run a lot of automatic gate openers from DoorKing, Ghost Controls, and Viking, and we carry parts and know the quirks of all three. We service nine major brands total, including LiftMaster, FAAC, BFT, Linear, and Elite. If your opener motor is fine but the gate itself needs new rollers, a repaired rail, or a re-welded bracket, we handle that on the same visit. We stock common Denver parts locally, so turnaround is fast.
Common Gate Parts & Welding Problems We See in Denver Homes
- Frost-heaved hinge posts: Central Denver’s clay-heavy soil expands hard when frozen. By March thaw in Baker and Curtis Park, posts that were plumb in October are leaning 5 to 10 degrees, dropping swing gates into concrete pads. The fix is a post reset with a deeper gravel-drained footing.
- Wet spring snow damage: Denver’s spring storms are wet and heavy, unlike dry ski-season powder. A gate frame can take on hundreds of pounds in hours, bending hinges and buckling wooden planks. We see a wave of calls after every big spring storm.
- Period hardware mismatches: Capitol Hill and Cheesman Park are filled with 1890s to 1940s wrought-iron gates built before standard hinge dimensions existed. Modern hinges do not fit. Custom welding is the only way to repair these without replacing the whole gate and losing the original look.
- Alley gate shared posts: In Denver’s grid of rear alleys, many gates share a post with the neighbor’s gate. Replacing a shared post without disrupting the neighbor’s driveway is a regular part of our week, and we plan each job so both alleys keep working.
Pricing for Gate Parts & Welding in Denver, CO
Denver’s market for gate welding and parts runs a little higher than you’d see in the outer suburbs, mostly because the older central Denver housing stock requires more custom fabrication. Here are honest ranges for common jobs:
- Hinge replacement: $120 - $260 per hinge
- Post replacement: $350 - $600 per post
- Rail repair welding: $90 - $180 per weld point
- Custom welding labor: $70 - $120 per hour
- Gate rollers: $40 - $90 per roller
Every quote is written and agreed before we start. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Denver
Our Denver crew regularly handles gate parts and welding in Glendale, Edgewater, Lakewood, and Wheat Ridge. If you’re in any of those areas, the same live-answer phone number reaches us, and the same 90-Day Done Right Promise covers the work.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Denver
Denver’s clay soil expands hard when it freezes, and at 5,280 feet the freeze-thaw cycle is aggressive. By March, the ground heaves posts out of plumb 5 to 10 degrees. The permanent fix is a deeper post footing with gravel at the base for drainage. Call (877) 610-2993 and we’ll assess your footing before quoting.
Yes, and that’s a big part of what we do in Capitol Hill and Cheesman Park. We match the original scrollwork and hinge strap dimensions, fabricate new pieces in the shop, and weld them in with minimal visible seams. The old gate keeps its character, and the new hardware is stronger than the original. Estimates are free.
First, don’t force the gate closed; a bent hinge under load can crack the post or wreck the latch. Wedge it shut if you need security, then call us at (877) 610-2993. We answer live 24/7 and can usually get to central Denver the same day during storm season.
Yes. We brace the shared post and support both gate leaves before cutting anything, so both driveways stay usable during the job. Shared post replacements are routine in Baker and Curtis Park alley blocks. We’ll give you a written quote and tell you exactly what the plan is before we start.
Look at how the gate moves. If it shudders or grinds but the motor runs fine, the rollers or track are usually the problem. If the gate slips mid-travel or jumps teeth, the rack and pinion are worn. We’ll inspect both and tell you what actually needs replacing - not what pads an invoice. Call (877) 610-2993 for a straight answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denver and the Front Range since 2001.