Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Denver
Gate installation in Denver costs $1,450-$4,800 for a standard driveway gate depending on material, span, and whether you need an operator, with most full installations running $2,200-$3,400. We install and set posts on schedule, and Hal Gatewood’s crew handles tight alley lots, shared driveways, and frost-heaved post replacements that national installers walk away from. If you need a gate that opens clean every time from the first spring thaw through the next snow season, call (877) 610-2993 and talk to a live person, not a menu tree.
Why Gatewood Fence & Gate Is Denver’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and his name is still on the door and on every invoice. That matters in a city where you might see the same contractor at the King Soopers on Federal Boulevard next month. We’re not a call center in another state. Our Denver office coordinates every job, and the person who answers your call works here, knows the neighborhoods, and can tell you when the crew will arrive.
We hold ourselves to a standard most companies in Denver will not put in writing: the 90-Day Done Right Promise. If the gate isn’t right, one call brings us back, no fine print, no runaround. We also answer the phone around the clock. A live person picks up at 2 a.m. if your gate motor quit and you can’t get your truck out of the alley. You can drive to the shop and look Hal in the eye if you want to. That’s the oldest accountability there is.
Our Denver customers have told us what they care about, and it’s rarely the sticker price. It’s showing up in the window we promised, explaining what we’re doing, and not finding an invoice bigger than the quote. We quote the job up front and we stand by that number. No trip charge inside the county, free second opinions on any written estimate, and a permanent 10% discount for seniors and veterans. And if you’ve got a gate that sags or grinds, we fix it in your driveway rather than hauling it off and selling you a new one. See more about our Gate Installation approach.
Our Gate Installation Services in Denver
Driveway Gate Installation
A new driveway gate in Denver gives you real control over who gets onto the property, especially in the alley-accessed blocks where your garage door faces a shared alley that half the block uses. We install steel, aluminum, ornamental iron, and wood driveway gates sized to your opening. Every post goes on a concrete footing below Denver’s frost line, because a post set shallow in this clay will lean by April.
Pedestrian Gate Installation
Pedestrian gates in Denver take more abuse than people expect. They are used dozens of times a day, they are in the path of snow shovels, and on Capitol Hill or Cheesman Park they’re often original to a Victorian-era fence with hardware that doesn’t match anything at the hardware store. We build and hang pedestrian gates that swing true, and when the existing post is still sound, we re-hang the gate on it instead of tearing out good work.
Sliding Gate Installation
On tight Denver lots, a swing gate is sometimes physically impossible. A sliding gate moves parallel to the fence line, so it never crosses a neighbor’s property and never swings into a car. We measure the rear travel pocket before we order anything, because a slide gate installed without enough room to fully retract will block your own driveway mid-cycle. This is the most common gate we install on shared driveways and narrow side yards in Baker and Curtis Park.
Swing Gate Installation
Swing gates are the classic Denver look, especially matching the ornamental iron fencing in the older central neighborhoods. But a swing gate is only as good as its hinge posts. We set posts deeper than code minimums, use concrete with proper cure time before hanging the gate, and account for the freeze-thaw cycle that pushes posts around in Denver’s dense clay. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Denver
We’re certified to install and service nine major opener brands, including Viking, Ghost Controls, and DoorKing. For Denver customers, that means we’re not guessing at wire placements or learning your motor’s manual on your dime. When an opener part fails, we can usually source it and have it fixed the same week, because we stock common boards and limit switches for these brands in the Denver office rather than ordering everything from a warehouse in Ohio.
Common Gate Installation Problems We See in Denver Homes
- Frost-heaved hinge posts. Denver’s clay soil holds water, freezes hard, and expands. A post that was plumb in October can lean five to ten degrees by April, dropping the gate onto the concrete pad. The fix is a new post set on a footing that reaches below the frost line, not a shim.
- Shared driveway property lines. In row-house blocks and bungalow neighborhoods, the fence line often is the property line. A swing gate that arcs across a neighbor’s driveway is a dispute waiting to happen. A sliding gate keeps everything on your side.
- Heavy spring snow loading. Denver’s wet spring snow is not dry ski powder. A single storm can drop hundreds of pounds onto a wooden gate, buckling planks and snapping lag bolts. Gate frames here need the right bracing and hinge sizing from day one.
- Narrow alley access. In Baker, Curtis Park, and Capitol Hill, rear alleys often leave little room between your garage door and the neighbor’s fence. A gate installed without accounting for vehicle turning radius means you have to get out and finesse the car every time.
Pricing for Gate Installation in Denver, CO
A pedestrian gate in Denver typically runs $650-$1,800 installed. A single driveway gate without an opener starts around $1,500 and runs to $3,500 depending on material and width. A full slide gate with operator, track, safety photocells, and electrical hookup is $3,500-$6,500. Ornamental iron custom work in Capitol Hill or Cheesman Park’s historic districts lands at the top of that range because the new hardware has to be hand-fitted to existing period hinge points.
Every quote is in writing and the number we quote is the number you pay. No surprises when the invoice lands. We also discount any repair over $200 by $40, and seniors and veterans save 10% permanently. Call (877) 610-2993 for a free site visit and a written quote.
We Also Serve Cities Near Denver
If you’re in Denver‘s close neighbors, we run crews into Glendale, Edgewater, Lakewood, and Wheat Ridge every week. The clay conditions and alley layouts are similar, and we treat these jobs with the same attention to frost-line footings and shared property lines.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Denver
In Denver’s 80204-80205 alley-grid blocks, the clay soil expands and contracts hard through the winter, and a post set shallower than the frost line will heave five to ten degrees by April. The gate then grinds on the pad and the latch misses the strike. The permanent fix is pulling the post, drilling below the frost line, and setting a new post in concrete with proper depth. That’s the first thing we check on every Denver repair call. Call (877) 610-2993 and we’ll come look.
Usually no, and the reason is geometry. A swing gate needs a full arc of clear space, and if the fence line is the property line, that arc crosses onto your neighbor’s side. The solution we recommend most on shared Denver driveways is a slider, which moves parallel to the fence line and stays on your property the entire time it opens. On a shared driveway in Capitol Hill, we installed a Viking sliding gate for exactly this reason. The side yard had zero room for a swing gate’s arc, so the gate slid parallel to the fence without ever crossing the neighbor’s side.
We stage the work so the driveway stays accessible whenever possible. If we’re setting a new hinge post, we remove only the old gate and leave the opening clear for access. For concrete work, we schedule the pour so it cures during the least disruptive window, and we brace the gate temporarily so you can still close and lock the property at night. In Denver, pedestrian access keeps working during the work. That’s not optional; it’s how we run every job.
Yes. Any automatic gate requires entrapment protection, whether that’s safety photocells across the travel path, contact edges, or both, depending on the gate style and operator. This is a safety requirement, not an upsell. We install protection on every automated gate we build, including the Vogel sliding gate on Capitol Hill where we added a safety photocell across the travel path. Call (877) 610-2993 and we’ll walk you through what your gate requires.
Baker, Curtis Park, and the older central blocks in 80204 and 80205 see the worst of it, because those neighborhoods sit on dense clay soils and the housing stock is old enough that many original posts were set shallow or never had proper footings. Capitol Hill and Cheesman Park have the added issue of period ornamental iron gates with hardware that predates standard hinge dimensions. We see more heave-related post resets in those ZIP codes than anywhere else in the metro.
Key Takeaways
- Gate installation in Denver runs $1,450-$4,800 for most projects, and we quote the job in writing before any work starts.
- Frost heave in the clay soils of central Denver will move a shallow post five to ten degrees in a single winter.
- Sliding gates are often the only legal option on shared driveways where the fence line is the property line.
- Every automatic gate needs entrapment protection, and we install it as standard.
- Hal Gatewood has been owner-operated since 2001, answers the phone live around the clock, and stakes his name on every job with the 90-Day Done Right Promise.
If your gate isn’t opening right, or you’re planning a new one in Denver, call (877) 610-2993 today. We’ll come out, measure, and hand you a written price before any work gets scheduled.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denver and the surrounding Front Range since 2001.