Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Denver
Gate access control in Denver usually means one of two things: a keypad or card reader that stops working because the gate has shifted out of alignment, or a homeowner who wants smartphone control without ripping out a perfectly good opener. We handle both. Hal Gatewood has been fixing gates since 2001, and the person who answers when you call (877) 610-2993 is someone who actually works on Denver gates, not a call center three states away.
We know the neighborhoods here. Baker, Curtis Park, Capitol Hill, Cheesman Park. We know the alleys, the tight right-of-ways, the old wrought-iron hardware. And we know how Denver’s freeze-thaw cycles knock gate posts out of plumb every spring, which is when most keypad and sensor problems suddenly show up.
Why Gatewood Fence & Gate Is Denver’s Preferred Gate Access Control Company
Denver homeowners tend to be skeptical of contractors, and honestly, they’ve earned the right. Too many national outfits quote one price on the phone and show up with a different number. Hal Gatewood’s name is on the shop and on every invoice. His address is published. His license number is published. If something isn’t right, you can drive to the shop and look him in the eye.
Every job we do carries the 90-Day Done Right Promise in writing. Not a verbal reassurance, not fine print. If it’s not done right, one call brings Hal back. No runaround. That’s been the rule since 2001.
We answer the phone with a live person 24 hours a day, 7 days a week. Not a voicemail, not a dispatch queue. When your gate is stuck open at 11pm in Capitol Hill and your car is trapped in the alley, you don’t want to leave a message. You want a person. You get one.
Our technicians are background-checked and uniformed. We’re certified to service nine major gate brands, including DoorKing, Viking, Elite, and Ghost Controls. And we weld on site, so your gate stays in your driveway where it belongs.
Our Gate Access Control Services in Denver
Keypad Entry
Keypad entry is the most common access control request we get in Denver’s central neighborhoods. The failure pattern here is specific: post heave from clay-heavy soils throws the gate slightly out of alignment, the latch misses its strike, and suddenly the keypad “isn’t working” when the real problem is the post underneath it. We fix both. A typical keypad entry installation or repair in Denver runs $225-$475, depending on whether we’re running new wire or working with existing conduit.
Phone Entry
Phone entry systems let you buzz in a delivery driver or contractor from your cell, which matters a lot in Denver where alley-facing gates sit far from the front door. We install systems that call your phone directly, no landline required. In central Denver’s older brick homes, the challenge is usually running wire through 100-year-old foundations. We’ve done it enough times in Baker and Curtis Park that we know where the surprises hide.
Remote Control
Remote controls fail for predictable reasons in Denver. Wide daily temperature swings loosen screws and stress solder joints. The high-altitude UV bakes plastic housings until buttons crack. We stock replacement remotes for DoorKing, Viking, Elite, and Ghost Controls, and we can clone most existing remotes in about ten minutes at your property. A replacement remote with programming in Denver typically runs $85-$180.
Card Reader
Card readers make sense for Denver properties with multiple users: shared rental units, small HOAs, carriage houses. We install proximity readers that work with fobs or cards, and we can integrate them with existing openers so you don’t have to replace a working motor just to upgrade access. Card reader installation in Denver generally runs $400-$900 per entry point, including wiring and programming.
Video Intercom
Video intercom is the upgrade we’re installing most often in Capitol Hill and Cheesman Park, where period ornamental iron gates front alley entries and homeowners want to see who’s at the gate before opening it. The trick with Denver’s older wrought-iron gates is mounting the camera housing on pre-standard hinge dimensions without drilling through ornamental work. We fabricate custom brackets on site. Video intercom systems with a single camera and one indoor monitor typically run $700-$1,400 in Denver.
Smart Access
Smart access means controlling your gate from a phone app, with the option to grant temporary access codes to dog walkers, cleaners, or rental guests. We integrate smart modules with existing DoorKing, Viking, Elite, and Ghost Controls openers. The install itself is the easy part. What matters in Denver is choosing hardware that handles the temperature swings and the wet spring snow loads that take down cheap consumer-grade equipment. Smart access upgrades in Denver run $350-$800 on average, depending on opener compatibility.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Denver
We’re certified to service DoorKing, Viking, and Elite equipment, along with Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common parts, circuit boards, and remotes in stock for Denver customers, so you’re not waiting a week for a part to ship from a warehouse in Ohio. If your access control panel uses Viking hardware or a DoorKing keypad, there’s a good chance the part you need is on a shelf about fifteen minutes from your house. And if it’s not, Hal will tell you that on the phone before you commit to anything.
Common Gate Access Control Problems We See in Denver Homes
- Post heave throwing off keypad latch alignment. Denver’s clay-heavy soils expand when frozen, and by April it’s routine to find hinge posts that were plumb in October now leaning 5-10 degrees. The keypad arms, the latch misses, and the opener thinks the gate is closed when it’s not.
- Wet spring snow bending hinge posts and misaligning photo-eyes. Denver’s spring snowstorms are heavy and wet, unlike dry ski-season powder. Hundreds of pounds can load onto a gate frame in hours, bending hinges just enough that entrapment protection faults and the opener refuses to close.
- Temperature swings loosening rack and pinion mounts on slide gates. Denver can swing 50°F in a single day. Metal expands and contracts repeatedly, and slide gate mounts work loose, causing the gate to bind mid-travel and trip the loop detector over and over.
- UV degradation on keypad housings and card reader faces. At 5,280 feet, UV is brutal. Plastic keypad housings crack, buttons lose their labels, and card reader screens become unreadable faster than at lower elevations. We replace with UV-rated components when we can.
Pricing for Gate Access Control in Denver, CO
Here’s what you can expect to pay in Denver right now. Keypad entry: $225-$475. Remote control: $85-$180. Phone entry: $350-$700. Card reader: $400-$900 per entry. Video intercom: $700-$1,400. Smart access: $350-$800. Those are real numbers from the Denver market, not national averages.
What affects the price? Access to the gate, age of the opener, whether existing conduit is salvageable, and whether the post itself needs re-setting before any access control work makes sense. In central Denver’s alley-grid blocks, post re-setting is often the first step, and that’s already included when we quote the job. The price we give you is the price you pay. We quote it before any work starts, and we honor it.
We also don’t charge a trip fee inside the county. You want a second opinion on a written estimate from another company? That’s free too. Seniors and veterans save 10% on every job, permanently. And any repair over $200 gets $40 off. Call (877) 610-2993 and we’ll give you a straight number over the phone.
We Also Serve Cities Near Denver
Our Gate Access Control team works throughout the metro area, including Glendale, Edgewater, Lakewood, and Wheat Ridge. We schedule from our Denver office, so response times to any of these nearby cities are usually same-day or next-day for access control work.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Denver
Because the post underneath it has moved. Denver’s clay-heavy soils freeze and expand through the winter, and by March thaw the hinge post on your alley gate has likely shifted 5-10 degrees out of plumb. The keypad still gets power and still arms, but the latch no longer catches its strike, so the gate jams open while the operator thinks it’s shut. It’s not a keypad problem. It’s a post problem, and it’s the single most common recurring repair we see in central Denver’s alley-grid blocks. Call (877) 610-2993 and we’ll check the post first, because fixing the keypad without the post means fixing it twice.
Yes. In nearly every case, we wire the smart module in parallel with your existing opener, which means the gate keeps working on remotes and keypads during the install. We don’t take your gate offline to upgrade access control. The one exception is if the post itself needs re-setting first, and in that case we’ll tell you upfront what the window looks like and get you back to manual control same-day. Call (877) 610-2993 for a free estimate on smart access in Capitol Hill.
Yes, and it’s non-negotiable. Sliding gates in tight Denver alleys and rights-of-way need working photo-eye sensors, contact edges, or both, because the space between the gate and the fence line is often too narrow for anyone to get out of the way. Code requires entrapment protection on every automated gate, and on a tight Denver right-of-way it’s about actual physical safety, not paperwork. We install and test these on every slide gate job, full stop. Call (877) 610-2993 if you’re not sure what your existing gate has.
Denver’s high-altitude UV breaks down plastic keypad housings, fades button labels, and clouds card reader screens faster than sea-level conditions. The plastic becomes brittle, buttons crack around the edges, and the labels wear off so you’re guessing which button arms the gate. We stock UV-rated replacement keypads and readers, and when we quote a repair we’ll tell you if the housing is the real problem rather than just swapping electronics that will crack again. Call (877) 610-2993 for an exact quote on your specific keypad or reader.
In most cases, yes. If your opener is a DoorKing, Viking, Elite, or Ghost Controls unit from roughly the last 15 years, we can add a smart access module that works with your phone while keeping your existing remotes functional. The bigger issue with old Capitol Hill wrought-iron gates is the pre-standard hinge hardware and the condition of the post, not the electronics. We’ll assess the whole setup before recommending an upgrade path, and we won’t sell you a smart module if the post is about to heave. Call (877) 610-2993 and Hal will walk you through what makes sense.
Contact Gatewood Fence & Gate in Denver
If your Denver gate access control isn’t working, call (877) 610-2993. A live person answers, 24/7. We’ll give you a straight price over the phone, schedule a time that works for you, and show up when we say we will. Hal Gatewood’s name is on the shop. The shop is in Denver. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denver since 2001.