Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Whitney
Gate motor repair in Whitney typically runs $180-$480, and most jobs are completed the same day we arrive. If your gate is stuck half-open on a 110°F afternoon, that’s not a scheduling problem - it’s a security problem. We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001, and we answer the phone with a live person 24/7. Call (877) 610-2993 and Hal Gatewood or one of his crew will head your way.
Whitney is home turf for us. We know the tract-home layouts off Boulder Highway, the CMU block walls along Tropicana, and the particular way caliche soil shifts post footings out here. When your gate motor strains against a sagging hinge, we find the real cause before we touch the opener.
Why Gatewood Fence & Gate Is Whitney’s Preferred Gate Motor & Opener Company
We’ve been fixing gates in Clark County since 2001, and we’ve spent more of those years in Whitney than most companies have been in business. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to check. That’s the oldest accountability there is.
Whitney homeowners keep calling us back because we repair before we replace. A burnt control board doesn’t mean you need a whole new operator. A sagging gate doesn’t mean the motor is bad. We weld on site, re-set posts, and only swap parts that are actually dead. Every job carries the 90-Day Done Right Promise in writing - one call brings us back, no runaround.
Response to Whitney is fast because we keep trucks stocked and ready. A live person answers the phone around the clock, and the person who shows up is background-checked and uniformed. No dispatch queue, no call center three states away.
Key takeaways:
- Repair-first approach - we fix what we can, replace only what’s dead
- On-site welding so the gate stays in your driveway
- 90-Day Done Right Promise in writing
- Free estimates, upfront pricing, no trip charge inside the county
- Senior and veteran discount: 10% off, permanently
Our Gate Motor & Opener Services in Whitney
Every service below starts with a free inspection and a quoted price you approve before any work begins. That’s not a convenience - it’s how we’ve operated since day one.
Motor Installation
New gate motor installation in Whitney typically runs $800-$1,600 depending on gate weight, travel length, and whether we’re adding safety photocells or battery backup. Because Whitney falls under Clark County’s unincorporated building authority, automatic gate operator replacements require permits through the Clark County Building Department - not the City of Las Vegas. We pull those permits for you, so you don’t have to figure out county paperwork.
Motor Repair
Most motor repairs in Whitney run $180-$480. We diagnose the actual failure before quoting anything. A noisy motor, a gate that reverses mid-travel, a remote that works only when you’re standing three feet away - those are symptoms, not the problem. We trace it back to control boards, limit switches, capacitor failures, or binding hinges.
Linear Motor
If your gate is hung from the 1980s or 1990s, there’s a good chance you have a Linear operator. Linear motors are tough, but their control boards fail after years of thermal cycling in Whitney’s 108°F+ summers. We stock Linear parts locally and service the full range, including older models other companies won’t touch. When a Linear motor can be saved, we save it.
Slide Motor
Slide gate motors in Whitney work hard because so many driveways stretch back on long, narrow lots. Slide operators wear differently than swing operators - rack and pinion teeth grind, bearings seize, and travel limits drift. We service and replace slide motors including Viking and BFT units commonly found on Whitney’s larger lots, and we inspect the track and footing before blaming the motor itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands, and in Whitney we mostly see FAAC, BFT, Linear, and Viking on older installations. We stock common parts for these brands locally, which means faster turnaround when a control board or limit switch fails. If your operator is discontinued - and many Whitney units from the 80s and 90s are - we’ll tell you honestly whether a retrofit makes sense or whether you’re throwing money at a motor that’s already past its service life. To see the full Gate Motor & Opener scope we handle, that’s covered on our main service page.
Common Gate Motor & Opener Problems We See in Whitney Homes
- Obsolete control boards failing mid-travel. The relay boards and transformer boards in 1980s-90s operators degrade with every 110°F day and cool desert night. Eventually they quit - usually with the gate stuck halfway. We keep stock of boards for older FAAC and Linear units because Whitney has so many of them.
- Worn lag-bolt hinges in CMU block walls. Most Whitney fences are concrete masonry block, and the lag bolts that hold swing gate hinges have been in place since the house was built. Once those bolts strip or the block cracks behind them, the gate sags and the motor works against gravity. The motor usually loses that fight.
- Mineral-laden water corroding ferrous hardware. The desert water supply leaves calcified deposits on exposed screws, brackets, and motor internals. We see gearboxes gummed up and solenoids seized from mineral buildup that has nothing to do with how the gate was originally installed.
- Post footing heave from caliche soil. Caliche expands and contracts with moisture and temperature. Over decades, that movement shifts post footings so the gate no longer hangs true. A new motor bolted to a shifted post is a waste of money - the post gets re-set first.
Pricing for Gate Motor & Opener in Whitney, NV
Here’s what we charge in Whitney, so you can budget before you call:
- Motor repair - $180-$480, depending on the failed component
- Slide motor replacement - $700-$1,400, including travel adjustments and safety checks
- Swing motor replacement - $650-$1,200, including hinge inspection and alignment
- Safety photocell upgrade - $150-$350 per set, installed and aligned
- Battery backup addition - $350-$700, wired and tested for power-outage operation
Clark County permitting adds a separate fee paid to the county, not to us. We pull the permit, and the amount shows up as a line item on your invoice - you’ll see exactly what the county charges. Every price is quoted and agreed before we touch a tool. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Seniors and veterans get 10% off, period.
We Also Serve Cities Near Whitney
Our crews serve the whole eastern valley. If you’re just over the line in Paradise, Winchester, Las Vegas, or Sunrise Manor, we cover those areas too. For anything specific to your area, start with our Gate Motor & Opener in Whitney page or give us a call and we’ll route the right person your way.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Whitney
Yes. Whitney is unincorporated Clark County, so automatic gate operator replacements require permits through the Clark County Building Department, not the City of Las Vegas. We pull the permit for you and the county fee appears as its own line item on your invoice. Call (877) 610-2993 and we’ll handle the paperwork.
Usually yes, if the operator is still in decent shape. We can wire an in-line battery backup kit into most 1990s-era FAAC, BFT, and Linear operators. If the control board is already failing from thermal cycling, adding battery backup won’t save it - in that case, replacement is the cheaper answer. We’ll tell you which path makes sense before you spend a dollar.
Whitney’s sustained summer highs above 108°F push gate motors past their thermal limits, especially when the gate is binding due to sagged hinges or a shifted post. A motor that runs hot shuts down on its internal thermal overload and works again once it cools - but the underlying binding is still there. We fix the binding, not just the symptom. Call (877) 610-2993 for a free estimate.
Under current UL 325 standards, automatic gate operators in Whitney require entrapment protection - typically non-contact sensors (photocells) and, on many swings, contact edges. If your gate was installed before these requirements, we recommend upgrading the photocells even if you’re only repairing the motor. It’s not a suggestion; it’s how we keep your family and delivery drivers safe.
Caliche is a hardened layer of calcium carbonate that sits just below Whitney’s topsoil. It expands and contracts with moisture and temperature, slowly shifting post footings over years. When the footing moves, the gate sags, and the motor strains and burns out early. We re-set posts and footings as part of motor replacement - otherwise you’ll be replacing the motor again in a few years. Call (877) 610-2993 for an exact quote - estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Whitney since 2001.
Ready when you are. Call (877) 610-2993 for a free estimate on any gate motor or opener work in Whitney. A live person answers, day or night.