Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Whitney
New gate installation in Whitney typically runs $1,400-$4,800 for a driveway gate and $600-$2,200 for a pedestrian gate, depending on whether it’s swing or sliding, steel or wrought iron, and how much post and footing work the site requires. We quote the price before any work starts, and it’s the price you pay. If your existing gate has pulled loose from a CMU block wall or binds every afternoon when the heat expands the steel, call us at (877) 610-2993 and we’ll come look at it.
Whitney’s housing stock is mostly tract homes built between 1975 and 2000, and those houses came with gates installed one way: lag-bolt hinges driven into block mortar. That was the standard then, and it’s failing now. We’ve been welding and refitting gates in this part of the east valley long enough to know what a Whitney gate needs before we quote it, because Hal Gatewood has been doing this since 2001 and his name is on the shop.
Why Gatewood Fence & Gate Is Whitney’s Preferred Gate Installation Company
We work in Whitney every week. The 89122 ZIP is dense with single-family homes behind CMU block walls, and a lot of those driveway gates are original equipment: 25 to 40 years old, powder coat burned off by UV, hinges loose in the mortar, operators that died years ago and were never replaced. Whitney homeowners call us because we fix the post, not just the panel. Anybody can hang a new gate on a bad post and walk away. We won’t.
Our customers here tend to be people who already paid a national company to replace a gate and got a call-center quote that turned into something different at the door. That doesn’t happen with us. Hal answers the phone himself or his crew does, and the person who shows up in Whitney is the same person whose name is on the invoice. We’re locally owned and owner-operated, with a published address and license number anybody can look up.
Every gate installation we do in Whitney carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No fine print, no “up to,” no argument. And because we serve Whitney from our Las Vegas office with crews already working this side of town, we can usually be on-site within a day of your call for estimates and standard installations.
Our Gate Installation Services in Whitney
Gate installation here is different than in newer parts of the valley. Tight lots, shared driveways, block walls on property lines, and gates that have to keep working while we work. We plan every Whitney job around the site, not around a catalog.
Sliding Gate Installation
Sliding gates solve a Whitney problem that swing gates don’t: no room to swing. On shared driveways and corner lots where a swing gate would block the sidewalk or hit a neighbor’s wall, a slide gate rides a track along the fence line and stays out of the way. Whitney’s open eastern valley is windy, and sliding tracks here fill with windblown sand and caliche dust, which is why we set tracks with drainage and recommend operators with dust-hardened rack and pinion components. A sliding gate install in Whitney generally runs $2,200-$4,800 depending on gate width and whether we’re adding an operator.
Driveway Gate Installation
Driveway gates in Whitney are almost always steel or wrought iron set into existing block walls from the original 1980s and 90s build-out. The failure point is rarely the gate panel. It’s the hinge post. Lag bolts corrode inside the block mortar, daily thermal expansion works them loose, and the gate drops. We don’t hang a new gate on a suspect post. We cut out the old anchors, set new footing with steel anchor plates, and build from there. Typical driveway gate installation in Whitney runs $1,800-$4,500, and that includes the post work if it’s needed.
Pedestrian Gate Installation
Pedestrian gates in Whitney are the workhorses of the property: they get slammed every school morning, warped in the heat, and ignored until the latch stops catching. We install steel pedestrian gates matched to your existing block wall opening, with hinges sized for the heat and hardware that won’t swell or bind. Most pedestrian gate installs in Whitney run $600-$2,200. If you need a keypad or card reader on the pedestrian side, we handle that access control too, including wiring run under the walkway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Whitney
We install and service gate operators from LiftMaster, FAAC, BFT, Linear, Viking, and more, and we keep common boards, remotes, and safety photocells on the truck. That matters in Whitney because nobody wants to wait a week for a part when their gate is stuck open on Tropicana-adjacent traffic. Hal is certified to service nine major brands, and we stock parts and accessories for the ones Whitney homes were built with. If the gate opener on your 1994 ranch is original, we can usually match it with a modern replacement the same week.
Common Gate Installation Problems We See in Whitney Homes
- Lag-bolt hinges pulling out of CMU block mortar. Whitney’s original gates from the 80s and 90s were anchored into mortar joints, not grouted cells. After 25 desert summers, those anchors are loose, corroded, or both, and the gate drops onto its latch side and binds the operator.
- Sliding tracks full of windblown sand and caliche. Whitney sits in the open eastern valley, and the wind carries fine dust that packs into tracks, wears rack teeth, and causes skipped teeth on the pinion. We see this weekly.
- Solar gate openers dying in 108°F heat. Undersized solar panels and sealed battery boxes can’t handle Whitney’s sustained summer highs. The opener dies right when the gate gets the most use on shared driveways.
- Post footings heaving in caliche soil. Whitney’s alkaline caliche expands and contracts with moisture and temperature swings. Shallow footings heave, posts lean, and the gate binds. We set footings below the caliche line where the soil is stable.
Pricing for Gate Installation in Whitney, NV
Here’s what gate installation actually costs in Whitney, quoted for this market, not a national average:
- Pedestrian gate, steel, manual: $600-$2,200 installed
- Driveway swing gate, steel or wrought iron: $1,800-$4,500 installed
- Driveway sliding gate, track and hardware: $2,200-$4,800 installed
- Gate operator, installed and adjusted: $800-$2,400 depending on weight and travel
- New post footings with anchor plates through caliche: $400-$900 per post
What moves the number is post condition, gate weight, whether you need an operator, and how much caliche we’re digging through. We give you a written price with the full scope spelled out before any work starts, and we honor it. If you already have an estimate from another company, bring it in. We’ll give you a free second opinion on any written estimate, no charge. And don’t forget the standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Whitney
Our crews cover the whole eastern valley from Whitney out to Whitney-adjacent communities and beyond. If you’re in Paradise, Winchester, Las Vegas proper, or Sunrise Manor, the same Gate Installation team that works Whitney every day can handle your gate. Call (877) 610-2993 and a live person answers, day or night.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Whitney
Yes, in most cases. Whitney is unincorporated Clark County, not City of Las Vegas, so gate permits and automatic operator replacements go through the Clark County Building Department, not the city. This surprises a lot of homeowners, and it surprises out-of-area contractors too. We pull the right permit for every Whitney job, and we’ll tell you at the quote stage whether your specific installation needs one. Call (877) 610-2993 and we’ll walk you through it.
Yes. We convert swing gates to sliding gates in Whitney all the time, especially on shared driveways and tight lots where there’s no room to swing. We remove the swing hardware, install a track along the fence line, and refit the gate with roller bearings and a rack. Most conversions run $2,200-$4,200 depending on gate size and whether we’re adding an operator. Call us for an exact quote; estimates are free.
Because Whitney’s summer heat runs above 108°F, and UV degrades rubber seals, nylon gears, and plastic housings within a few seasons. The fix is an operator rated for the heat, and we spec operators for this valley specifically: vented enclosures, external-venting batteries on solar units, and shaded mounting wherever possible. If your last operator died in its first or second Whitney summer, call (877) 610-2993 and we’ll put in one that’s specced for this climate.
Yes. We never take a walkway or driveway gate out of service unless it’s the one we’re actively working on. On most Whitney installs, we set the new pedestrian gate first, then tackle the driveway side, so you always have one way in and out. If you need a keypad, card reader, or intercom added, we wire it during the install and program it before we leave. Call (877) 610-2993 for a free estimate.
We dig gate post footings a minimum of 30 inches, and 36-40 inches where soils are loose or where we hit caliche that cracks and heaves. Whitney’s caliche is notorious for holding water against the post and expanding in the heat. We set steel anchor plates at the base of every post, use concrete collars above the caliche line, and let it cure before we hang the gate. It takes a little longer, but the gate stays where we set it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Whitney since 2001.
Contact Gatewood Fence & Gate in Whitney
If your Whitney gate is sagging, binding, dead in the driveway, or just needs a proper installation on posts that will hold, call us at (877) 610-2993. Estimates are free, the price is quoted before work starts, and the 90-Day Done Right Promise is in writing on every job. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.