Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across White Settlement
Gate motor repair in White Settlement typically runs $180-$380, and most opener failures on older ranch homes trace back to one thing: a gate post that has shifted out of plumb in the Blackland Prairie clay. We get calls from homeowners across White Settlement every week dealing with operators that grind, buzz, or trip their breaker because the hinge post moved and the motor is fighting the gate instead of driving it. Hal Gatewood has been working on gates since 2001, and we answer the phone live 24/7 at (877) 610-2993. If your opener in White Settlement is struggling, call us and we’ll tell you straight what it needs.
Why Gatewood Fence & Gate Is White Settlement’s Preferred Gate Motor & Opener Company
We’re not a national outfit with a call center three states away. Gatewood Fence & Gate is owner-operated, and Hal’s name is on the shop and on every invoice. When you call about a gate motor in White Settlement, you talk to a person who has actually worked on gates in this city, not a dispatcher reading from a script. Our Gate Motor & Opener work is backed by the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
White Settlement’s housing stock is specific. The post-WWII building boom around what is now NAS Fort Worth Joint Reserve Base left this city with a dense concentration of 1950s and 1960s ranch homes, pier-and-beam foundations, and original chain-link or wood gates that are all aging out at the same time. We know what that means for a gate motor: posts set 18 to 24 inches deep, often with no concrete, slowly tilting in the shrink-swell clay. A new opener bolted to a leaning post will fail. We fix the post first, then the motor. That’s the repair-first difference.
Every job in White Settlement carries our standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We quote the price before any work starts, and the price doesn’t change at the door.
Our Gate Motor & Opener Services in White Settlement
Motor Installation
A new gate motor in White Settlement starts around $850 for a single swing gate operator and runs $1,400-$2,600 for a complete installation with safety photocells, keypad entry, and a battery backup. Before we sell you a motor, we look at the post. On a 1960s ranch off South Cherry Lane, our crew arrived to find a LiftMaster swing gate operator laboring against a chain-link gate whose hinge post had tilted a full 3 inches out of plumb. We reset the post in a deep concrete footing, then reinstalled the operator with new safety photocells and a keypad entry, and now the motor cycles smooth even after the fall rains heave the clay. That’s the right order of work. Fix the foundation, then add the motor.
Motor Repair
Motor repair in White Settlement runs $180-$380 for most jobs, including diagnostics, board replacement, limit switch adjustment, and gear replacement. The most common repair call we get: the motor hums but the gate doesn’t move, or the gate crawls and then stops. On older White Settlement properties, that’s usually a gear stripped from years of driving a gate whose post has shifted. We don’t just swap the gear and walk away. We check the post alignment, because if the post is still leaning, the new gear will strip too. Show us a gate closing on its own and we’ll show you where it’s failing.
Linear Motor
Linear gate motors, especially on wide tube gates at the back of acreage properties around White Settlement, take a beating in this soil. As the posts lean, the rack and pinion engagement slips, which causes gear stripping and jerky operation. A linear motor rebuild or replacement in White Settlement runs $400-$1,100 depending on the motor’s pull rating and whether the rack needs realigning or replacing. We service FAAC, BFT, Linear, and Viking linear operators, and we carry common parts for these brands locally so we’re not waiting on a warehouse in another state.
Slide Motor
Slide gate openers in White Settlement run $900-$1,800 for a complete install on a residential driveway, and repair work typically lands between $250 and $550. The big issue here is the track. Older slide gates in White Settlement were often installed on steel track beds that have settled unevenly in the clay. When the track dips or bows, the motor works harder, the chain slaps, and eventually the limit switch or the drive gear fails. We check the track, the wheels, and the post alignment before we touch the motor. Replacing the motor without fixing the track means doing the job twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
We’re certified to service nine major gate brands, and in White Settlement we most often work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for FAAC, BFT, Linear, and Viking locally, which means faster turnaround for White Settlement customers who don’t want to wait a week for a board to ship. Whether it’s a solar-powered Viking on an acreage entrance off a county road, or a BFT underground operator on a 1960s driveway, we have the tools and the part numbers ready. A gate sags in the hinge post, not in the middle, and that’s where we start, regardless of brand.
Common Gate Motor & Opener Problems We See in White Settlement Homes
- Operators burning out from shifted posts. The shrink-swell clay under White Settlement moves posts every single year. A motor driving a gate whose hinge post has leaned 2 to 3 inches is fighting the gate, not moving it. The motor burns out or strips a gear. The fix is resetting the post in a proper concrete footing first, then repairing the motor.
- Solar openers failing in summer. On acreage entrances where running mains power is impractical, solar gate openers are common around White Settlement. During the prolonged summer droughts, dust coats the panels, and batteries undercharge from the heat. Clearing the panels and load-testing the battery fixes most of these calls.
- Rack and pinion wear on wide farm gates. Wide tube gates with linear or slide motors lose rack and pinion engagement as the posts lean. You’ll hear a grinding or skipping sound, and the gate will run jerky. If you keep forcing it, the gear strips. That’s a $250-$550 repair, but if you ignore it, the motor needs replacing at twice the cost.
- 1950s and 1960s chain-link posts failing at end of life. Those original posts were set 18 to 24 inches deep with no concrete. Sixty years of clay movement later, they’re done. When you call us about a gate motor in White Settlement and we find a leaning post, we’ll tell you the truth: the motor can’t be fixed properly until the post is reset. We have that conversation upfront, not halfway through the job.
Pricing for Gate Motor & Opener in White Settlement, TX
A typical gate motor repair in White Settlement runs $180-$380. Full motor installation on a single swing gate starts around $850 and runs $1,400-$2,600 with safety photocells, a keypad, and battery backup. Linear and slide motor installs run $900-$1,800. Battery backup replacement runs $150-$400. The biggest variable in White Settlement isn’t the motor, it’s the post. If the hinge post needs resetting, add $350-$650 for digging, new concrete, and re-hanging the gate. We quote that cost before any work starts. You’ll never get a surprise invoice at the door. Call (877) 610-2993 for a free estimate, and ask about the $40 off any repair over $200 and the 10% senior and veteran discount. We honor both, every time.
We Also Serve Cities Near White Settlement
Our crews work all over White Settlement, and we regularly run calls to Benbrook, River Oaks, Fort Worth, and Forest Hill as well. Same crew, same 90-Day Done Right Promise, same live person answering the phone at (877) 610-2993.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in White Settlement
Your motor is fighting the clay. North Texas’s Blackland Prairie soil shrinks during summer droughts and heaves when rains return in fall and spring. That cyclical movement shifts your gate posts, which knocks the gate out of alignment, and the motor has to grind against misaligned hinges every cycle. A repaired motor on a shifted post will struggle again the next season. The fix is resetting the post in a proper concrete footing, then adjusting the motor. Call (877) 610-2993 and we’ll check the post before we touch the motor.
Yes, and we do it regularly on acreage entrances around White Settlement. Wide farm tube gates need a heavier-duty linear or slide motor, usually rated for the gate’s full weight and width. The two things that matter most on wide gates: the gate must run level on solid wheels or a track, and the posts have to be deep enough to hold the torque. In this clay, that often means resetting both posts to 36-plus inches with concrete before the motor goes on. A typical wide farm gate opener install in White Settlement runs $1,400-$3,000 depending on gate weight and whether we need to run power or add a solar kit with battery backup. Call (877) 610-2993 for a free measure and a written price.
You need the post first, every time. A new motor bolted to a leaning post will fail. We see this all over White Settlement on original 1950s and 1960s chain-link gates whose posts were set 18 to 24 inches deep with no concrete. The heavy clay has long since tilted them. The right sequence is: dig out the old post, set a new one in a proper concrete footing, re-hang the gate so it swings true, then install or adjust the motor. Post resetting in White Settlement runs $350-$650. The motor work is separate, and we quote it all upfront.
Yes. Every automatic gate in White Settlement is required to have entrapment protection, which means safety photocells mounted on the gate and on the gate posts, plus a reversing mechanism that responds to contact. This isn’t optional equipment, and we won’t install an opener without it. On older White Settlement properties with original gates, we often find openers that were installed years ago without proper photocells or with edge sensors that have failed. We bring those up to code as part of any repair or new install. Call (877) 610-2993 and we’ll tell you exactly what your gate needs.
A heavy-duty swing gate operator rated for your gate’s weight, with a battery backup, on posts that have been reset deep enough to hold. In White Settlement, that usually means 36-inch or deeper footings in concrete, because the shallow 18-to-24-inch posts of the 1960s simply will not hold a motor’s torque through the seasonal clay movement. For most double swing gates on White Settlement driveways, you’re looking at $1,600-$3,200 for a complete install with two operators, photocells, keypad, and battery backup. The motor brand matters less than the post depth. Get the foundation right and a LiftMaster or FAAC will run for years.
If your gate motor in White Settlement is grinding, buzzing, or dead, call (877) 610-2993. A live person answers, day or night. We’ll give you an honest diagnosis, a written price, and a 90-Day Done Right Promise in writing. No voicemail, no call center, no surprises.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Settlement and the surrounding area. The name is on the shop, and the shop is down the road.