Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across White Settlement
Gate installation in White Settlement is not a one-size-fits-all job, and if you live in one of the 1950s or 1960s ranch homes that make up so much of this city, you already know why. The soil here moves. The old posts were set shallow. And a gate that worked fine for forty years is now sagging, binding, or refusing to latch. We’re Gatewood Fence & Gate, and we’ve been building and repairing gates in this part of North Texas since 2001. When your gate needs to be installed right the first time, call us at (877) 610-2993. Hal Gatewood’s name is on the shop, and he is the one who makes sure the work is done right.
Key takeaways for White Settlement homeowners:
- A new driveway gate in White Settlement typically runs $1,800-$4,500 depending on width, operator, and whether we’re resetting posts.
- Shallow 1960s post footings and Blackland Prairie clay mean proper excavation and concrete work are non-negotiable here.
- We install and service FAAC, BFT, Linear, and Viking operators, among others.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back.
- You can reach a live person at (877) 610-2993 any time, day or night.
Why Gatewood Fence & Gate Is White Settlement’s Preferred Gate Installation Company
White Settlement is the kind of place where people still check a company’s address before they call. We understand that. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and license number anyone can look up. Hal Gatewood has been doing this work since 2001, and he still answers the phone himself half the time. We don’t route calls through a call center three states away. You get a live person, 24 hours a day, seven days a week.
Our crews work White Settlement neighborhoods all year, from the streets near Cherry Lane and Bomber Road down to the older blocks around Gibbs Drive. We know what’s under the ground here because we’ve dug it up more times than we can count. That local knowledge matters when you’re deciding whether to reuse an old post or pour a new footing. The answer is almost always pour a new one. Fix the panel without the post and you’ll fix it twice.
Our Gate Installation team backgrounds and uniforms every person who shows up at your door. No mystery subs. The person who walks your property is the person who’ll be doing the work or supervising it directly. For over two decades, that’s how we’ve built our reputation in White Settlement and the surrounding area.
Our Gate Installation Services in White Settlement
Driveway Gate Installation
Driveway gates in White Settlement run the gamut from single-wide chain-link gates on post-war lots to wide steel estate gates on the long driveways off Calmont Avenue and west toward the base. A typical single driveway gate installation here runs $1,800-$3,200 including the frame, hinges, and basic operator wiring. Wide or custom steel driveway gates with automation run higher, often $3,500-$6,500, especially when we’re trenching power from the house or setting new posts with proper concrete footings.
The power and span problem is real on these older lots. Many White Settlement driveways were built for a single car and a chain-link gate that opened by hand. When you add an automatic operator to that setup without accounting for a wider, heavier gate, you’re asking a 60-year-old post to do work it was never meant to do. We address span and load before we ever touch an operator.
Pedestrian Gate Installation
Pedestrian gates on White Settlement’s modest lots see a lot of use and not much maintenance. We install steel tube pedestrian gates with powder-coated frames and self-closing hinges that hold up to kids, dogs, and the occasional teenager who forgets the latch. A new pedestrian gate, installed and anchored into concrete or a steel post, typically runs $550-$1,200 depending on width, material, and whether we’re cutting into an existing fence run or building a fresh opening.
Sliding Gate Installation
If your property has a side entry, an alley access, or a driveway that slopes or turns, a sliding gate often makes more sense than a swing gate. Sliding gates are a common sight on the wider lots along Cherry Lane and down toward Loop 820, where swing arcs would eat into parking or landscaping. A new sliding gate in White Settlement starts around $2,500 and runs to $6,000+ for wide, heavy steel gates with automated operators.
One thing we tell every White Settlement customer considering a slide gate: the concrete pad matters as much as the gate itself. Blackland clay heaves seasonally, and a pad poured without proper subgrade prep will flex and bind the track. We over-excavate, compact, and pour thicker than code minimums because we’ve seen what happens when someone doesn’t.
Swing Gate Installation
Swing gates are the classic single and double gate setup for residential driveways in White Settlement. A pair of swing gates on a wide rural entrance has to be hung square and balanced, or the operators will fight each other until something fails. Double swing gate installation with automation typically runs $3,200-$7,000 depending on width, material, operator brand, and whether solar power is part of the equation. We install FAAC, BFT, Linear, and Viking operators regularly on these jobs, and we service them long after the install.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
We’re certified to service nine major gate brands, and on installs in White Settlement we work most often with FAAC, BFT, Linear, and Viking operators. We can get parts fast for all four, and we keep common control boards, radio receivers, and limit switches stocked for the models we install most. When a storm or a power surge takes out a board on your gate, you don’t want to wait two weeks for a part to ship in. We keep the common stuff on the truck and the uncommon stuff gets ordered same day. That matters when your gate is stuck open on a Monday morning.
Common Gate Installation Problems We See in White Settlement Homes
White Settlement’s housing stock is specific. Most of it was built between the late 1940s and early 1970s for base workers and blue-collar families. Those homes came with chain-link or simple wood gates, and a lot of those gates are still out there today, held together by rust and habit. Here’s what we run into most:
- Shallow posts with no concrete. Technicians working White Settlement regularly find chain-link gate posts installed in the 1960s set only 18-24 inches deep with no concrete footing. The heavy clay has long since tilted them. A new gate on an old post is a waste of money.
- Undersized 1960s operators retrofitted onto heavy new gates. When a homeowner replaces a light chain-link gate with a new wood perimeter gate, the old operator often can’t handle the power draw and duty cycle. The control board burns out. We size the operator to the gate, not the other way around.
- Solar gate openers stalling in overcast winter weeks. North Texas January brings long stretches of gray. Rural acreage entrances on solar power need properly sized panels and battery banks, or the gate stalls half-open during the exact weeks you least want to walk out and push a 500-pound gate off the track.
- Slide gates binding on pads that flex with seasonal heave. Blackland clay doesn’t just move fence posts. It moves concrete pads too. If a slide gate’s pad was poured without proper compaction and reinforcement, the pad flexes with the soil cycle and the gate starts binding on the track.
Pricing for Gate Installation in White Settlement, TX
Here’s what you can expect to pay for gate installation in White Settlement, based on the work we’ve done in this market:
- Pedestrian gate: $550-$1,200 installed
- Single driveway swing gate, no operator: $1,800-$3,200
- Single driveway swing gate with operator: $3,000-$5,000
- Double swing gate with automation: $3,200-$7,000
- Sliding gate with automation: $2,500-$6,000+
- Post reset with proper concrete footing: $350-$800 per post
Every job gets a written price before we start. The quote you agree to is the price you pay. No surprises at the door. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near White Settlement
Our crews work White Settlement every week, and we also take jobs in the surrounding area. If you’re in Benbrook, River Oaks, Fort Worth, or Forest Hill, we’ll come to you. Scheduling is coordinated from our Dallas-Fort Worth office, and a live person answers the phone around the clock. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in White Settlement
We set gate posts a minimum of 30 to 36 inches deep in White Settlement, with concrete footings that go below the active heave zone of the Blackland Prairie clay. The original posts on most of these 1950s and 1960s homes went in 18-24 inches with no concrete at all. We over-excavate, set the post in concrete, and often add extra gravel at the base for drainage. It’s the only way a gate stays plumb through the summer drought cycle and the fall rain heave. Call (877) 610-2993 if you’re seeing a lean in your existing gate.
Yes, and on long rural driveways where trenching power would mean tearing up a hundred feet of yard, solar is often the best option. We install solar gate openers with battery backup and size the panel to the duty cycle of the gate. The mistake people make in White Settlement is undersizing the panel for North Texas’ overcast January weeks. A panel sized for July sun won’t keep a wide farm gate running through a cloudy week in winter. We size for the worst month, not the best one.
The biggest reason is reusing the original post. A 1960s chain-link post set 20 inches deep in shrinking clay cannot hold a new automatic gate. The operator works fine. The post leans. The gate sags into the latch, then stops latching. The scope-creep conversation everyone in this trade learns to have happens here: you can’t bolt a new operator to a post that’s been tilting for forty years. We reset the post first, then install the operator.
Every automatic gate we install in White Settlement meets current UL 325 entrapment protection requirements. That means photo eyes, safety edges on pinch points, and operators with built-in obstruction detection. We follow the manufacturer’s installation instructions and the current standards. A gate that moves by itself has to be installed to a standard, not just wired hot and left to run. We install to the standard.
Double gates drift out of alignment when the hinge posts move independently of each other, usually because the posts weren’t set deep enough or the operators weren’t synchronized. In White Settlement, the clay under each post can heave at different rates depending on drainage, tree roots, and how much sun each side gets. We tie the posts, set them deep with concrete, and use a single synchronized controller for both operators so the gates open and close as a matched pair. If your double gates are drifting, call (877) 610-2993 and we’ll come look.
The Posts Are the Whole Job in White Settlement
Here’s the thing about gate installation in this city that would not be true in a newer suburb with different soil and different construction. White Settlement’s post-WWII housing boom put up hundreds of ranch homes on Blackland Prairie clay. The gate posts for those homes went in the ground 18 to 24 inches deep, with no concrete, because that’s how everyone did it in 1960. Sixty years of shrink-and-heave later, those posts are the problem. You can hang a beautiful new gate on a tilted old post and within one season it’s sagging again. The post is the job. Everything else bolts to it.
On a long driveway off Calmont Avenue, our crew reset a 1960s chain-link hinge post for a homeowner whose new swing gate kept sagging into the latch. We dug past the old 20-inch clay-set post, poured an 18-inch concrete footing below grade, and installed a LiftMaster LA400 gate operator with a solar panel kit. No trenching to the house, and the gate now holds plumb through the summer drought cycle. That’s the kind of fix you only get from someone who has done it in this dirt for years.
New gate installations on these lots have to over-excavate. You dig past the disturbed soil, pour proper concrete footings, and sometimes add a second post at the operator mount. It’s more work and it costs a little more, but it’s the difference between a gate that works for two years and a gate that works for twenty. We don’t cut that corner, and we don’t hire people who do.
Get a Free Estimate for Gate Installation in White Settlement
If your gate is leaning, binding, or simply past its useful life, call us. We’ll come out, look at the soil, the posts, the operator, and the way the gate actually moves. Then we’ll hand you a written price. You won’t get a call center, a voicemail, or a guy who quotes one price on the phone and wants another at the door. You’ll get Hal or one of his crew, a straight answer, and work that carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 today and tell us what your gate is doing. We’ll tell you what it needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Settlement and the surrounding area since 2001.