Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Norfolk, MA
Gate repair in Norfolk, MA typically costs between $185 and $640 for a typical hinge, post, or opener fix, and most jobs are completed within one visit. If your wooden paddock gate is dragging, your opener is faulting, or your latch froze solid over the winter, we can get to your property quickly, diagnose the actual problem, and fix it without selling you parts you don’t need. Call (877) 610-2993 and you’ll reach a live person who knows Norfolk’s gates.
Norfolk isn’t like the denser suburbs around it. This is horse country with heavy wooden gates, gravel-set posts, and freeze-thaw cycles that chew through hardware every winter. We’ve been working on Norfolk gates long enough to know the difference between a motor that needs a new capacitor and one that’s been wired wrong by somebody who didn’t understand the load. Hal Gatewood answers the phone himself, or his crew does. Nobody gets a recording.
Why Norfolk Homes Are Different
Norfolk sits inland without the coastal moderation that keeps towns closer to Boston from getting the same hard freeze-thaw cycling. Every winter, moisture seeps into the soil around wooden gate posts, freezes, expands, and heaves the post a fraction of an inch out of plumb. Do that for five winters and a gate that latched perfectly in October now swings wide into the driveway or won’t close at all. Spring is our busiest gate repair season in Norfolk for exactly that reason.
The housing stock here mixes older colonial farmhouses, some pre-1900, with a wave of 1970s to 1990s colonials and capes built on generous lots as the town suburbanized. Large lot sizes mean longer private driveways and a higher-than-average rate of driveway gate installations, often wooden or tubular steel, that see heavy daily use. On the equestrian properties off Route 115 and 115A, we’re regularly working on heavy wooden paddock gates and pasture swing gates set in gravel footings rather than concrete. Gravel drains better for livestock areas, but it grips the post poorly, so frost heave becomes a recurring maintenance reality a local tech learns to expect.
Gate Repair in Norfolk
Gate repair in Norfolk, MA usually runs $185-$640 for most hinge, post, or opener fixes, and most jobs are completed within one visit. We work all across the 02056 zip code, from the older farmhouse-lined roads near the town center to the horse properties off Routes 115 and 115A. The problems we see here are specific to this town: frost-heaved gravel-set posts, cast-iron hardware seized from inland freeze-thaw cycles, and heavy gates that work harder than any ornamental driveway gate in a denser suburb. Gate Repair is what we built this company on, and it’s still the bulk of our calls from Norfolk.
Electric Gate Repair
When an electric gate opener fails in Norfolk, it’s usually one of three things: a dead capacitor, a cracked control board, or a safety sensor blocked by oak leaves, mud, or snow. On older rural properties, we also see a lot of 1990s operators that have simply outlived their duty cycle. Before we sell you a new opener, we test the motor windings, check the limit switch, and verify the wiring. If the board has failed, we’ll tell you honestly whether a retrofit is worth the money or if the motor itself is too far gone. Most electric gate repairs in Norfolk fall between $210 and $640.
Hinge & Post Repair
This is where Norfolk gates actually fail. A lot of gate posts for horse paddocks and pasture entries are set in gravel rather than concrete, because gravel lets water drain away from livestock areas. That’s good for the horses, but it means frost pushes the posts out of plumb every winter. We re-set and re-plumb those posts more often than any other repair we do in this town, typically $185-$420 depending on whether we’re resetting one post or two. Then we check the hinges, re-hang the gate, and test the swing. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Most gate sag is not a gate problem. It’s a hinge post problem. When the post leans even half a degree, the latch pulls, the gate drags, and the opener strains. We realign gates by correcting the post, not by shimming the hinges or cutting the latch. That’s the repair that lasts. Gate realignment in Norfolk typically runs $150-$340. If you’ve already “fixed” the panel twice and it still sags, the post has been the problem the whole time. Show me the gate closing on its own and I’ll show you where it’s failing.
Why does my Norfolk wooden swing gate keep sagging after I fix the panel?
Because the panel was never the problem. In Norfolk, gate posts under horse fences and paddock entries are usually set in gravel so water drains away from the livestock. Gravel moves. Every winter, the ground freezes and expands, pushing those posts out of plumb. The gate then sags, drags, and throws the latch out of alignment. Fixing the panel just puts a band-aid on a broken leg. We re-plumb the post, re-hang the gate, and charge $185-$420 depending on how many posts need resetting. Call (877) 610-2993 and we’ll come look at it.
Do Norfolk’s horse farm gates need different repair than a driveway gate in Walpole?
Different in every way that matters. Walpole has more ornamental iron and aluminum driveway gates. Norfolk has heavy wooden paddock gates, pasture swing gates, and agricultural-style entries. The posts are set in gravel, not concrete. The hinges are heavier. The usage is harder: hay trucks, horse trailers, vet calls. A gate tech who only knows driveway gates will misdiagnose a sagging Norfolk pasture gate in about 20 minutes. We repair both, but we know which town we’re in when we pull up. Call (877) 610-2993 for a free estimate.
Gate Installation in Norfolk
Gate installation in Norfolk, MA typically runs $1,900 to $4,800 for a standard driveway gate, with pedestrian gates starting around $700 and heavy agricultural or equestrian gates running higher depending on post depth and hardware. We work all over Norfolk, from the horse farms off Route 115 to the colonial neighborhoods near the town center, and we answer the phone live when you call. Every install is measured, quoted in writing, and scheduled. We don’t promise same-day installation because this work is ordered and built to fit your opening, but we do promise a free measure and a firm price within a few days of your call. Gate Installation is what we do when replacement makes more sense than repair.
Driveway Gate Installation
Driveway gates are common in Norfolk because the lots are generous and the driveways are long. A typical wooden or tubular steel driveway gate runs $2,200 to $4,800 installed, depending on width, material, and whether you want a pedestrian cut-through. We lag posts deep, check them with a level, and weld hinges on site so the gate stays in your driveway, not on a lift somewhere. On properties off Route 115A where frost heave is worst, we go deeper than code minimum and brace the post so it doesn’t wander.
Swing Gate Installation
Swing gates are the most common install we do in Norfolk, especially double swing gates for wider driveways on older farmhouse lots. A single swing gate runs $1,900 to $3,800; a double gate typically $3,400 to $5,900. On horse properties, we often set posts in gravel rather than concrete for drainage, same as the existing paddock posts, but we go deeper and brace them so frost heave doesn’t win. The hardware we use is cold-rated and sealed, not the box-store stuff that seizes by February.
Sliding Gate Installation
Sliding gates make sense on Norfolk properties where the driveway slopes or where a swing arc would block the entry. Expect $2,800 to $5,500 for a sliding gate install, including the roller track and post reinforcement. We also service Linear and Viking opener systems, so if you want the gate automated on day one, we can do that as part of the same job. The track gets set on proper base gravel, not just dirt, because we’ve seen too many Norfolk tracks shift after two winters and burn out the motor.
How much does a driveway gate cost in Norfolk?
A driveway gate in Norfolk typically costs $1,900 to $4,800 installed, depending on width, material, and whether it’s a single or double gate. Heavy agricultural gates on horse properties can run higher. We quote a firm price before any work begins, so the number we give you is the number on the invoice. Call (877) 610-2993 for an exact quote for your gate.
What kind of gate survives a Norfolk winter?
A gate that survives a Norfolk winter needs posts set below the frost line, cold-rated hardware that won’t seize, and a top brace or tension rod that resists sag. We set posts deeper than the minimum, seal the hardware, and check the plumb before we leave. Spring is our busiest repair season because gates installed with shallow posts or cheap hardware reveal themselves as soon as the ground thaws. Call (877) 610-2993 for a free measure and written quote.
Gate Motor & Opener in Norfolk
A gate motor or opener that won’t respond is a problem you feel the same day. In Norfolk, the most common call we take is for a swing gate that stopped mid-arc or a slide gate that grinds and stops two feet short. Most gate opener repairs in Norfolk run between $190 and $420, and because we’re familiar with the equestrian estates off Route 115 and the neighborhoods along Main Street, we can usually have someone there quickly. The heavy wooden gates common on Norfolk horse properties put real load on motors, and that load changes the diagnosis. Gate Motor & Opener service is what keeps your gate moving once the hardware is sound.
Motor Repair
Most motor repairs in Norfolk fall between $190 and $420 for common fixes like capacitor swaps, limit switch adjustments, control board replacement, and gear drive rebuilds. On horse properties, we see more moisture intrusion into the housing because gates are often placed near paddock areas with mud and gravel dust. We test the full system after every repair, not just the part we replaced, because a weak capacitor today means a burned-out board in August. The price is agreed before we start, and it’s the price you pay.
Motor Installation
A new gate motor installation in Norfolk typically runs $900 to $2,400 depending on gate weight and whether you’re going with a slide or swing configuration. On the larger lots off Route 115A where driveway gates are set back from the road, we pay extra attention to conduit depth and sealing, because the freeze-thaw cycles out here will find any weak point in the line. Most residential properties land around $1,200 to $1,600 for a solid operator. We quote the full job before we begin and leave the gate moving smoothly, with the safety edges and photo eyes dialed in.
Slide Motor Repair
Slide gate motors need a level track and properly spaced wheels, and around Norfolk we find plenty of tracks that were set without adequate base gravel. Over a couple of winters, the track shifts and the motor strains against the added friction. Slide motor repairs in Norfolk generally run $220 to $500 for board replacements, gear swaps, and limit resets. If the track itself is bad, we handle the re-leveling as part of the repair rather than bolting a new motor to a failing foundation. The whole job is quoted upfront, not pieced together as we go.
How does frost heave affect my pasture gate’s automatic opener?
Frost heave pushes the gate post out of plumb. When the post moves, so does the gate frame. The safety photo-eyes go out of alignment, the beam breaks, and the opener faults out. In Norfolk, this happens to horse farm gates every single spring. The fix is not to bypass the sensors. It’s to re-plumb the post so the beam stays aligned year round. Then we recalibrate the opener and test it cold. Call (877) 610-2993 for a free estimate.
My old slide gate has a rack and pinion drive that jams - is it worth repairing?
It depends on the condition of the rack and the motor. If the rack teeth are intact and the motor spins cleanly, we can repair the drive sprocket, re-grease the rail, and get your gate moving again for a fraction of replacement cost. If the rack is missing teeth or the motor bearings have failed after 30 years in the weather, replacement is the cheaper answer and we’ll tell you straight. Either way, you get a written price before we touch anything. Call (877) 610-2993 to schedule a look.
Gate Access Control in Norfolk
Gate access control in Norfolk runs into problems most towns never see. This is horse country, with gravel-set posts, heavy wooden paddock gates, and driveway entries that take real abuse from winter freeze-thaw cycles. An access system that works fine on a vinyl gate in Walpole fails differently on Boardman Street when frost heave shoves a hinge post two inches out of plumb. We know because we’ve fixed both. If your keypad stopped releasing the latch or your remote won’t reach from the barn, the problem is usually mechanical, not electronic. Gate Access Control is about making sure the signal actually opens the gate, not just sends it.
Keypad Entry
Keypad entry systems are the backbone of most Norfolk gate access setups, especially on properties with multiple users: horse owners, boarders, farriers, feed deliveries, family members. A keypad that works intermittently is usually not the keypad itself. Around Norfolk, we routinely find the real culprit is a post that shifted, pulling the latch out of alignment with the strike plate. The keypad sends the signal, the operator fires, and nothing releases because geometry changed. Keypad repair or replacement in Norfolk runs $240-$480. We fix the post, re-plumb the gate, and verify the keypad works from a cold start.
Remote Control
Remote control systems on Norfolk gates often fail because the original receiver on a 1980s or 1990s operator has simply worn out. Range drops, remotes un-pair, and eventually nothing opens unless you walk up and press the keypad. In many cases we can retrofit a modern receiver to the existing operator for a fraction of what a new gate motor costs. Remote troubleshooting and new remotes in Norfolk run $130-$320. If your remote opens the gate but it stops and reverses halfway, you’ve likely got a hinge post sagging and dragging the gate across the loop detector, or a safety edge that’s been knocked out of alignment.
Phone Entry
Phone entry systems are common on Norfolk properties where deliveries and contractors need access but homeowners don’t want to hand out remotes. When a caller dials the gate system and it doesn’t dial back, or the entry code stopped working, the problem is almost always the control board. Legacy phone entry boards fail silently. We replace them with modern cellular-capable units that still work with your existing gate operator. A new phone entry system for a Norfolk driveway gate usually runs $500-$950, installed and programmed with your property’s numbers.
Can you retrofit my old Norfolk gate operator with a modern keypad entry system?
In most cases, yes. A 1980s or 1990s operator may have a dead control board, but the motor, swing arm, and mounting hardware can still be solid. We frequently retrofit a modern receiver, keypad, and safety photocells to legacy operators in Norfolk for a fraction of what a new operator costs. If the existing operator is beyond saving, we’ll tell you straight and quote a replacement. Call (877) 610-2993 for a free second opinion on any written estimate.
My wooden pasture gate sags and the remote won’t open it fully. What’s actually wrong?
The gate sags at the hinge post, not in the middle. Over years, the post leans, the gate leaf drops, and it starts dragging across the ground or the loop detector. The remote is probably fine. The operator is working, but it can’t complete its cycle because the gate physically can’t swing. The fix is resetting the hinge post and re-hanging the gate, then recalibrating the operator’s limits. We do this on Norfolk horse properties regularly. Call (877) 610-2993 for a free estimate.
Gate Parts & Welding in Norfolk
Gate parts and welding in Norfolk usually means one of two things: hardware that gave out, or a post that moved. Post replacement on a heavy wooden paddock gate off Route 115 runs $450-$900. Hinge replacement on a tubular steel driveway gate typically lands between $180 and $380. We get to Norfolk fast, we weld on site in your driveway, and the price is quoted and agreed before any work starts. The name is on the shop, and the shop is down the road. Gate Parts & Welding is where we fix what other companies want to replace.
Hinge Replacement
Hinge replacement in Norfolk runs $180-$380 for most gates, depending on the weight of the gate and the condition of the post behind it. On heavier wooden gates, we almost always weld a reinforced hinge bracket to the post before mounting the new hinge. That’s the fix that holds. On exposed lots off Route 115 and the farm roads around town, wind load works hinges hard. We’ve seen colonial-era latch weld points crack clean through after a good nor’easter.
Post Replacement
Post replacement is the job that separates a real gate repair from a Band-Aid. In Norfolk, a rotten or heaved hinge post behind a heavy gate needs to come out, get a proper footing, and go back in plumb. That typically runs $450-$900. On horse properties where posts are gravel-set for drainage, we often re-set the same post in tamped gravel but add a welded steel sleeve or bracket at the hinge point. It keeps drainage for the paddock area and stops the hinge from twisting every freeze-thaw cycle.
Custom Welding
Custom welding is where we earn our keep on the horse farms. Last spring we reset a sagging 16-foot wooden pasture swing gate off Route 115A where frost heave had pushed the hinge post nearly four inches out of plumb. We pulled the gravel-set post, re-plumbed the post footing, welded a reinforced hinge bracket to address the sag correction, and replaced the seized hinge hardware so the gate latched cleanly again. That’s a single call for Norfolk, not three calls from three different companies. Sag correction with weld reinforcement at the post typically runs $250-$600.
Why do wooden gate posts on Norfolk horse farms heave out of plumb more than in Walpole or Franklin?
Because Norfolk’s paddock and pasture gate posts are often set in gravel instead of concrete, a drainage choice for livestock areas that leaves the post more exposed to frost movement. Norfolk’s inland freeze-thaw cycles then push those gravel-set posts a little more each winter. Walpole and Franklin have fewer working horse farms, so fewer gravel-set posts. If your gate stopped latching this spring, call (877) 610-2993 and we’ll check the post first.
Can you weld a cracked hinge bracket on my 1970s-era wooden driveway gate without replacing the whole hinge post?
Yes, in most Norfolk cases we can. If the post is sound enough to hold a weld and we can get a clean surface, we weld the cracked bracket, add a reinforcement plate, and mount a new hinge to the repaired assembly. A full post replacement is only needed when the wood is rotted or heave has moved the post too far to hold plumb. We’ll tell you honestly which route makes sense. Call (877) 610-2993 for a free estimate.
Brands We Service in Norfolk
We keep parts on the truck for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common failures - capacitors, control boards, limit switches, remote receivers - we can fix same-visit because the parts are already in the bay. For less common boards or obsolete units, we pull overnight from our Boston-area warehouse and return the next day. Our brands page has the full list.
Pricing for Gate Repair in Norfolk, MA
| Service | Typical range in Norfolk |
|---|---|
| Hinge or latch repair | $90-$220 |
| Hinge replacement (single gate) | $180-$380 |
| Post re-set and re-plumb (wooden gate) | $185-$420 |
| Post replacement / reset (ground-set) | $450-$900 |
| Gate realignment | $150-$340 |
| Rail repair (wood, per rail) | $150-$350 |
| Weld repair / sag correction at post | $250-$600 |
| Custom weld bracket or plate | $120-$400 |
| Electric / automatic gate repair | $210-$640 |
| Gate motor repair | $190-$420 |
| Gate motor installation | $900-$2,400 |
| Keypad entry repair or replacement | $240-$480 |
What pushes price up in Norfolk is almost always post depth and ground conditions: gravel-set posts heave more, heavy wooden gates need stronger hardware, and the inland freeze-thaw cycles mean we sometimes find multiple problems that stacked up over one winter. The price you’re quoted is the price you pay. We agree on it in writing before any work starts, and we don’t change it at the door.
Neighborhoods We Serve in Norfolk
We work all across Norfolk, including the 02056 zip code. Our typical response for gate repairs in Norfolk is same-day when it’s an emergency, and next-day for most non-urgent calls. Scheduling and dispatch are coordinated from our Boston office, but the crew that shows up knows these roads.
- Near Rockwood Ridge
- Around Pond Street and Boardman Street
- Off Route 115 and 115A toward the horse properties
- The older farmhouse-lined roads near the town center
- Properties near Mirror Lake
Service Area - Cities Near Norfolk
We serve Norfolk directly and regularly travel to neighboring towns for gate repair, installation, and welding work. If you’re just outside the 02056 line, we likely still cover you with no trip charge inside the county. Nearby areas we work include Norfolk, MA, Millis, MA, Wrentham, MA, Walpole, MA, Medfield, MA, and Medway, MA. Call us and we’ll tell you straight if you’re in our range.
Serving Norfolk, MA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Norfolk and the communities around it; dispatch is coordinated from our Boston office. The map shows the Norfolk coverage area; if your address is on it, we can help.
Also serving nearby: Norfolk, MA, Millis, MA, Wrentham, MA, Walpole, MA, Medfield, MA, Medway, MA.
FAQs About Gate Repair in Norfolk
For emergency gate repairs in Norfolk - a gate stuck open, a motor smoking, or a horse loose because a latch failed - we usually dispatch same-day. Our scheduling team in Boston coordinates the closest available crew. For non-urgent repairs, next-day is typical. Call (877) 610-2993 anytime; a live person answers 24/7.
Most residential gate installations in Norfolk don’t require a building permit if you’re replacing an existing gate in the same location. New driveway gates or any work that modifies the town right-of-way may need review. We know the local requirements and will flag it during your free measure if a permit applies. We don’t start work until you know the full scope and cost.
Freeze-thaw cycles move the gate just enough to break the latch alignment. By March, the post has shifted a half inch, the gate leaf hangs a hair lower, and the latch no longer catches. You’ll see it freeze open, or it’ll close and then pop back because the operator thinks something’s in the way. It’s rarely the operator. It’s geometry, and we fix it by re-plumbing the post, re-hanging the gate, and testing the latch cold. Call (877) 610-2993 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Norfolk Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield