Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Norfolk
Gate installation in Norfolk, MA typically runs $1,200 to $9,500 depending on gate size, material, operator, and whether we’re working with a new post foundation or rebuilding an existing entrance. Most single driveway gates install in one day; wide farm gates and double swing entrances usually take two to three. We serve all of Norfolk, including the equestrian properties off Route 115 and 115A, the colonial neighborhoods near Seekonk Street, and the larger acreage lots around Boardman Street and Main Street. Call (877) 610-2993 and Hal Gatewood will know which roads you mean.
Why Gatewood Fence & Gate Is Norfolk’s Preferred Gate Installation Company
Hal Gatewood has been building and repairing gates since 2001, and the work holding up along Norfolk’s long driveways that has his name on it. He’s owner-operated, which means the person who quotes the job is the same person who stands behind it when the frost heave shows up two winters later. That accountability matters in a town like Norfolk, where neighbors talk and a gate that sags at the hinge post gets noticed from the road.
Our Norfolk customers call because the previous gate either never closed right after the first winter or the operator quit during a cold snap. We re-set posts in proper concrete footings, weld on site, and install operators sized for the span and weight of the actual gate, not the cheapest spec that fits on paper. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No runaround.
Response to Norfolk is same-day for urgent gate failures. A live person answers the phone 24 hours a day, and that person works for Gatewood, not a call center three states away.
Our Gate Installation Services in Norfolk
Driveway Gate
Norfolk’s housing stock mixes older colonial farmhouses with 1970s through 1990s colonials and capes on generous lots. That means long private driveways and a higher-than-average number of driveway gates, often wooden or tubular steel, that see heavy daily use. We install single and double driveway gates with operators matched to the gate’s actual weight and duty cycle. A heavy wooden driveway gate on a 14-foot opening needs a different operator than a light aluminum gate on the same span, and we spec them accordingly.
Pedestrian Gate
On Norfolk horse farms, a pedestrian gate alongside the main entrance keeps people from swinging open a 16-foot pasture gate every time someone walks through. We build matching pedestrian gates with self-closing hinges and latches that hold up to kids, dogs, and stable hands who are in a hurry. Where security matters, we add keypad or card access tied to the same system as the driveway gate.
Sliding Gate
Sliding gates make sense on Norfolk properties where the driveway slopes up from the road or where a swing gate would block the parking area when open. In Norfolk’s freeze-thaw climate, a sliding gate’s track needs proper drainage underneath or ice locks the rollers in place by February. We set tracks on compacted stone with a slight fall away from the gate line, which keeps the gate sliding through mud season instead of jammed against frozen ground.
Swing Gate
Swing gates are the workhorse of Norfolk’s horse properties. Single swing gates handle narrower paddock entrances; double swing gates cover the wide farm entrances where hay trucks and horse trailers need room. The failure we see most is at the hinge post, not the gate panel. On gravel-set posts around livestock areas, frost heave pushes the post out of plumb every winter and by spring the gate binds or won’t latch. We pull those posts, re-plumb them in concrete footings, and re-hang the gate so it swings true again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norfolk
We’re certified to install and service operators from Linear, Viking, and Ghost Controls, among others. For Norfolk’s wide farm gates and long driveway runs, we typically recommend operator brands that handle heavier duty cycles without overheating. We keep common control boards, remotes, and safety edge parts on the truck, so a failed opener on a Norfolk gate often gets fixed the same visit rather than ordered and waited on. If you already have an operator from DoorKing or another major brand, we service that too.
Common Gate Installation Problems We See in Norfolk Homes
- Frost-heaved hinge posts: On horse properties around town, ground-set wooden posts for paddock and pasture gates are commonly set in gravel rather than concrete so water drains away from livestock areas. The trade-off is that gravel offers nothing to hold a post against freeze-thaw cycling, so posts heave out of plumb every winter and gates stop latching by March.
- Undersized solar panels on long driveways: Many Norfolk homes built in the 1970s through 1990s have driveways far from the nearest electrical service. Gate operators retrofitted with solar panels that were never sized for Norfolk’s cloudy winter weeks drain their batteries and quit. We calculate panel wattage and battery capacity against the gate’s actual duty cycle, not a salesman’s brochure number.
- Sagging wooden paddock gates on wide openings: A 16-foot wooden gate is heavy, and livestock lean against gates. The result is a hinge post that slowly tips toward the latch side and a gate that drags. We fix the post, not just the hinges, because fixing the panel without the post means fixing it twice.
- Seized iron hinges and latch hardware: Norfolk sits inland without the coastal moderation of eastern Norfolk County, so winters run harder here. Iron hinges and latch hardware seize from repeated freeze-thaw moisture cycles. We replace worn hardware with heavier-duty hinges and latches suited to the weight of the gate and the season.
Pricing for Gate Installation in Norfolk, MA
A single wooden driveway gate with a manual latch in Norfolk typically runs $1,200 to $2,800, installed on new concrete-post footings. A double swing gate on a wide farm entrance runs $3,500 to $9,500 depending on span, gate weight, and whether we’re adding an operator. Solar operator packages for long Norfolk driveways add $1,400 to $3,200 including panel, battery, operator arm, keypad, and safety photocells. We quote every job upfront and everyone signs off on the price before any work starts. No trip charge inside the county, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a written estimate.
One thing we tell every Norfolk homeowner: the frost heave problem on gravel-set posts is not a fluke and not something you caused. It’s what happens in this specific climate when posts are set for drainage instead of stability. We fix it so it stays fixed.
Out off Route 115A, we re-set a pair of frost-heaved hinge posts for a double swing gate at a horse farm where the original installers had backfilled with crushed stone instead of concrete. After re-plumbing both posts in new footings and re-hanging the gates, we installed a FAAC solar gate opener with keypad entry and safety photocells so the owners could operate the wide farm entrance without trenching power to the road. That’s the kind of job that defines Gate Installation work in Norfolk, and it’s the reason neighbors around here call us first.
We Also Serve Cities Near Norfolk
While our crews are in Norfolk regularly for Gate Installation in Norfolk, we also work across the town line in Millis, Wrentham, Walpole, and Medfield. Our Norfolk customers know us, and their cousins in neighboring towns have started calling too. If you’re in one of those towns, the same pricing and the same 90-Day Done Right Promise apply.
Serving Norfolk, MA - Our Local Coverage Area
We’re based in the Norfolk area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Norfolk
Because in Norfolk’s horse properties, many ground-set wooden posts were originally backfilled with gravel instead of concrete to help drainage around livestock areas. Inland Norfolk gets harder freeze-thaw cycling than the coastal towns east of Route 95, so that gravel offers no resistance when the ground freezes and swells. Each winter pushes the posts a little farther out of plumb. The fix is re-setting posts in proper concrete footings below the frost line, which we do regularly around 02056. Call (877) 610-2993 and we’ll tell you if your posts are candidates.
Yes, that’s the standard approach for the long driveway runs off Route 115 and Boardman Street where running conduit to the road grid is impractical. We size the panel and battery bank for Norfolk’s actual winter sun, not a summer-only spec. It’s the difference between a gate that opens every morning through February and one that dies during the first cloudy week. Call for a free assessment.
A double swing gate, either heavy-duty wooden or tubular steel, is what holds up best on wide entrances where hay trucks and trailers pass through. Single wide gates sag under their own weight over time, especially when livestock lean on them. A double gate splits the load across two hinge posts, and we install those posts in concrete footings sized for Norfolk’s frost depth. The operator needs to be duty-rated for the gate weight, not just the span.
If it’s a swing gate in Norfolk, the most likely cause is a frost-heaved hinge post that’s now binding the gate against its travel arc. The operator then trips its safety circuit or burns out trying to push a gate that no longer swings freely. Solar setups go a step further: the battery drains because a bound gate draws more current per cycle than the panel replaced all winter. We find out which one it is and fix the post, the operator, or both. Call (877) 610-2993 for a same-day look.
Yes. Most Norfolk horse farms we work on need a separate pedestrian gate at the main entrance, otherwise every person walks through the wide vehicle gate and wears out a $3,000 operator before its time. We build pedestrian gates to match the driveway gate and tie them into the same access control when you want keypad or card entry on both. Quotes are free and firm before any work starts.
Call Gatewood Fence & Gate for Gate Installation in Norfolk
If you’re in Norfolk and your gate is leaning, sagging, frozen, or simply not there yet, call (877) 610-2993. Hal will answer or call you back from the shop, not from a dispatch queue. Every job gets a written price before work starts, no trip charge inside the county, and the 90-Day Done Right Promise behind it. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norfolk since 2001.